5 research outputs found
Re-thinking Analog Integrated Circuits in Digital Terms: A New Design Concept for the IoT Era
A steady trend towards the design of mostly-digital and digital-friendly analog circuits, suitable to integration in mainstream nanoscale CMOS by a highly automated design flow, has been observed in the last years to address the requirements of the emerging Internet of Things (IoT) applications. In this context, this tutorial brief presents an overview of concepts and design methodologies that emerged in the last decade, aimed to the implementation of analog circuits like Operational Transconductance Amplifiers, Voltage References and Data Converters by digital circuits. The current design challenges and application scenarios as well as the future perspectives and opportunities in the field of digital-based analog processing are finally discussed
Ring-oscillator with multiple transconductors for linear analog-to-digital conversion
This paper proposes a new circuit-based approach to mitigate nonlinearity in open-loop ring-oscillator-based analog-to-digital converters (ADCs). The approach consists of driving a current-controlled oscillator (CCO) with several transconductors connected in parallel with different bias conditions. The current injected into the oscillator can then be properly sized to linearize the oscillator, performing the inverse current-to-frequency function. To evaluate the approach, a circuit example has been designed in a 65-nm CMOS process, leading to a more than 3-ENOB enhancement in simulation for a high-swing differential input voltage signal of 800-mVpp, with considerable less complex design and lower power and expected area in comparison to state-of-the-art circuit based solutions. The architecture has also been checked against PVT and mismatch variations, proving to be highly robust, requiring only very simple calibration techniques. The solution is especially suitable for high-bandwidth (tens of MHz) medium-resolution applications (10–12 ENOBs), such as 5G or Internet-of-Things (IoT) devices.This research was funded by Project TEC2017-82653-R, Spain
Digital-based analog processing in nanoscale CMOS ICs for IoT applications
The Internet-of-Things (IoT) concept has been opening up a variety of applications, such as urban and environmental monitoring, smart health, surveillance, and home automation. Most of these IoT applications require more and more power/area efficient Complemen tary Metal–Oxide–Semiconductor (CMOS) systems and faster prototypes (lower time-to market), demanding special modifications in the current IoT design system bottleneck: the analog/RF interfaces. Specially after the 2000s, it is evident that there have been significant improvements in CMOS digital circuits when compared to analog building blocks. Digital circuits have been taking advantage of CMOS technology scaling in terms of speed, power consump tion, and cost, while the techniques running behind the analog signal processing are still lagging. To decrease this historical gap, there has been an increasing trend in finding alternative IC design strategies to implement typical analog functions exploiting Digital in-Concept Design Methodologies (DCDM). This idea of re-thinking analog functions in digital terms has shown that Analog ICs blocks can also avail of the feature-size shrinking and energy efficiency of new technologies. This thesis deals with the development of DCDM, demonstrating its compatibility for Ultra-Low-Voltage (ULV) and Power (ULP) IoT applications. This work proves this state ment through the proposing of new digital-based analog blocks, such as an Operational Transconductance Amplifiers (OTAs) and an ac-coupled Bio-signal Amplifier (BioAmp). As an initial contribution, for the first time, a silicon demonstration of an embryonic Digital-Based OTA (DB-OTA) published in 2013 is exhibited. The fabricated DB-OTA test chip occupies a compact area of 1,426 µm2 , operating at supply voltages (VDD) down to 300 mV, consuming only 590 pW while driving a capacitive load of 80pF. With a Total Harmonic Distortion (THD) lower than 5% for a 100mV input signal swing, its measured small-signal figure of merit (FOMS) and large-signal figure of merit (FOML) are 2,101 V −1 and 1,070, respectively. To the best of this thesis author’s knowledge, this measured power is the lowest reported to date in OTA literature, and its figures of merit are the best in sub-500mV OTAs reported to date. As the second step, mainly due to the robustness limitation of previous DB-OTA, a novel calibration-free digital-based topology is proposed, named here as Digital OTA (DIG OTA). A 180-nm DIGOTA test chip is also developed exhibiting an area below the 1000 µm2 wall, 2.4nW power under 150pF load, and a minimum VDD of 0.25 V. The proposed DIGOTA is more digital-like compared with DB-OTA since no pseudo-resistor is needed. As the last contribution, the previously proposed DIGOTA is then used as a building block to demonstrate the operation principle of power-efficient ULV and ultra-low area (ULA) fully-differential, digital-based Operational Transconductance Amplifier (OTA), suitable for microscale biosensing applications (BioDIGOTA) such as extreme low area Body Dust. Measured results in 180nm CMOS confirm that the proposed BioDIGOTA can work with a supply voltage down to 400 mV, consuming only 95 nW. The BioDIGOTA layout occupies only 0.022 mm2 of total silicon area, lowering the area by 3.22X times compared to the current state of the art while keeping reasonable system performance, such as 7.6 Noise Efficiency Factor (NEF) with 1.25 µVRMS input-referred noise over a 10 Hz bandwidth, 1.8% of THD, 62 dB of the common-mode rejection ratio (CMRR) and 55 dB of power supply rejection ratio (PSRR). After reviewing the current DCDM trend and all proposed silicon demonstrations, the thesis concludes that, despite the current analog design strategies involved during the analog block development
High-Bandwidth Voltage-Controlled Oscillator based architectures for Analog-to-Digital Conversion
The purpose of this thesis is the proposal and implementation of data conversion
open-loop architectures based on voltage-controlled oscillators (VCOs) built with
ring oscillators (RO-based ADCs), suitable for highly digital designs, scalable to
the newest complementary metal-oxide-semiconductor (CMOS) nodes.
The scaling of the design technologies into the nanometer range imposes the
reduction of the supply voltage towards small and power-efficient architectures,
leading to lower voltage overhead of the transistors. Additionally, phenomena
like a lower intrinsic gain, inherent noise, and parasitic effects (mismatch between
devices and PVT variations) make the design of classic structures for ADCs more
challenging. In recent years, time-encoded A/D conversion has gained relevant
popularity due to the possibility of being implemented with mostly digital structures.
Within this trend, VCOs designed with ring oscillator based topologies
have emerged as promising candidates for the conception of new digitization
techniques.
RO-based data converters show excellent scalability and sensitivity, apart from
some other desirable properties, such as inherent quantization noise shaping and
implicit anti-aliasing filtering. However, their nonlinearity and the limited time
delay achievable in a simple NOT gate drastically limits the resolution of the converter,
especially if we focus on wide-band A/D conversion. This thesis proposes
new ways to alleviate these issues.
Firstly, circuit-based techniques to compensate for the nonlinearity of the ring
oscillator are proposed and compared to equivalent state-of-the-art solutions.
The proposals are designed and simulated in a 65-nm CMOS node for open-loop
RO-based ADC architectures. One of the techniques is also validated experimentally
through a prototype. Secondly, new ways to artificially increase the effective
oscillation frequency are introduced and validated by simulations. Finally, new
approaches to shape the quantization noise and filter the output spectrum of a
RO-based ADC are proposed theoretically. In particular, a quadrature RO-based
band-pass ADC and a power-efficient Nyquist A/D converter are proposed and
validated by simulations.
All the techniques proposed in this work are especially devoted for highbandwidth
applications, such as Internet-of-Things (IoT) nodes or maximally
digital radio receivers. Nevertheless, their field of application is not restricted to
them, and could be extended to others like biomedical instrumentation or sensing.El propósito de esta tesis doctoral es la propuesta y la implementación de arquitecturas
de conversión de datos basadas en osciladores en anillos, compatibles
con diseños mayoritariamente digitales, escalables en los procesos CMOS de fabricación
más modernos donde las estructuras digitales se ven favorecidas.
La miniaturización de las tecnologías CMOS de diseño lleva consigo la reducción
de la tensión de alimentación para el desarrollo de arquitecturas pequeñas
y eficientes en potencia. Esto reduce significativamente la disponibilidad de tensión
para saturar transistores, lo que añadido a una ganancia cada vez menor
de los mismos, ruido y efectos parásitos como el “mismatch” y las variaciones
de proceso, tensión y temperatura han llevado a que sea cada vez más complejo
el diseño de estructuras analógicas eficientes. Durante los últimos años la conversión
A/D basada en codificación temporal ha ganado gran popularidad dado
que permite la implementación de estructuras mayoritariamente digitales. Como
parte de esta evolución, los osciladores controlados por tensión diseñados con topologías
de oscilador en anillo han surgido como un candidato prometedor para
la concepción de nuevas técnicas de digitalización.
Los convertidores de datos basados en osciladores en anillo son extremadamente
sensibles (variación de frecuencia con respecto a la señal de entrada) así como
escalables, además de otras propiedades muy atractivas, como el conformado
espectral de ruido de cuantificación y el filtrado “anti-aliasing”. Sin embargo, su
respuesta no lineal y el limitado tiempo de retraso alcanzable por una compuerta
NOT restringen la resolución del conversor, especialmente para conversión A/D
en aplicaciones de elevado ancho de banda. Esta tesis doctoral propone nuevas
técnicas para aliviar este tipo de problemas.
En primer lugar, se proponen técnicas basadas en circuito para compensar el
efecto de la no linealidad en los osciladores en anillo, y se comparan con soluciones
equivalentes ya publicadas. Las propuestas se diseñan y simulan en tecnología
CMOS de 65 nm para arquitecturas en lazo abierto. Una de estas técnicas
presentadas es también validada experimentalmente a través de un prototipo.
En segundo lugar, se introducen y validan por simulación varias formas de incrementar
artificialmente la frecuencia de oscilación efectiva. Para finalizar, se
proponen teóricamente dos enfoques para configurar nuevas formas de conformación
del ruido de cuantificación y filtrado del espectro de salida de los datos
digitales. En particular, son propuestos y validados por simulación un ADC pasobanda
en cuadratura de fase y un ADC de Nyquist de gran eficiencia en potencia. Todas las técnicas propuestas en este trabajo están destinadas especialmente
para aplicaciones de alto ancho de banda, tales como módulos para el Internet
de las cosas o receptores de radiofrecuencia mayoritariamente digitales. A pesar
de ello, son extrapolables también a otros campos como el de la instrumentación
biomédica o el de la medición de señales mediante sensores.Programa de Doctorado en Ingeniería Eléctrica, Electrónica y Automática por la Universidad Carlos III de MadridPresidente: Juan Pablo Alegre Pérez.- Secretario: Celia López Ongil.- Vocal: Fernando Cardes Garcí
Design and Implementation of Novel High Performance Domino Logic
This dissertation presents design and implementation of novel high performance domino logic techniques with increased noise robustness and reduced leakages. The speed and overhead area became the primary parameters of choice for fabrication industry that led to invention of clocked logic styles named as Dynamic logic and Domino logic families. Most importantly, power consumption, noise immunity, speed of operation, area and cost are the predominant parameters for designing any kind of digital logic circuit technique with effective trade-off amongst these parameters depending on the situation and application of design. Because of its high speed and low overhead area domino logic became process of choice for designing of high speed application circuits. The concerning issues are large power consumption and high sensitivity towards noise. Hence, there is a need for designing new domino methodology to meet the requirements by overcoming above mentioned drawbacks which led to ample opportunities for diversified research in this field. Therefore, the outcome of research must be able to handle the primary design parameters efficiently. Besides this, the designed circuit must exhibit high degree of robustness towards noise.In this thesis, few domino logic circuit techniques are proposed to deal with noise and sub-threshold leakages. Effect of signal integrity issues on domino logic techniques is studied. Furthermore, having been subjected to process corner analysis and noise analysis, the overall performance of proposed domino techniques is found to be enhanced despite a few limitations that are mentioned in this work. Besides this, lector based domino and dynamic node stabilized techniques are also proposed and are investigated thoroughly. Simulations show that proposed circuits are showing superior performance. In addition to this, domino based Schmitt triggers with various hysteresis phenomena are designed and simulated. Pre-layout and post-layout simulation results are compared for proposed Schmitt trigger. Simulations reveal that proposed Schmitt trigger techniques are more noise tolerant than CMOS counterparts. Moreover, a test chip for domino based Schmitt trigger is done in UMC 180 nm technology for fabrication