Multilevel MDA-Lite Paris Traceroute

Since its introduction in 2006-2007, Paris Traceroute and its Multipath Detection Algorithm (MDA) have been used to conduct well over a billion IP level multipath route traces from platforms such as M-Lab. Unfortunately, the MDA requires a large number of packets in order to trace an entire topology of load balanced paths between a source and a destination, which makes it undesirable for platforms that otherwise deploy Paris Traceroute, such as RIPE Atlas. In this paper we present a major update to the Paris Traceroute tool. Our contributions are: (1) MDA-Lite, an alternative to the MDA that significantly cuts overhead while maintaining a low failure probability; (2) Fakeroute, a simulator that enables validation of a multipath route tracing tool's adherence to its claimed failure probability bounds; (3) multilevel multipath route tracing, with, for the first time, a Traceroute tool that provides a router-level view of multipath routes; and (4) surveys at both the IP and router levels of multipath routing in the Internet, showing, among other things, that load balancing topologies have increased in size well beyond what has been previously reported as recently as 2016. The data and the software underlying these results are publicly available.Comment: Preprint. To appear in Proc. ACM Internet Measurement Conference 201

Measured impact of crooked traceroute

Data collected using traceroute-based algorithms underpins research into the Internet’s router-level topology, though it is possible to infer false links from this data. One source of false inference is the combination of per-flow load-balancing, in which more than one path is active from a given source to destination, and classic traceroute, which varies the UDP destination port number or ICMP checksum of successive probe packets, which can cause per-flow load-balancers to treat successive packets as distinct flows and forward them along different paths. Consequently, successive probe packets can solicit responses from unconnected routers, leading to the inference of false links. This paper examines the inaccuracies induced from such false inferences, both on macroscopic and ISP topology mapping. We collected macroscopic topology data to 365k destinations, with techniques that both do and do not try to capture load balancing phenomena.We then use alias resolution techniques to infer if a measurement artifact of classic traceroute induces a false router-level link. This technique detected that 2.71% and 0.76% of the links in our UDP and ICMP graphs were falsely inferred due to the presence of load-balancing. We conclude that most per-flow load-balancing does not induce false links when macroscopic topology is inferred using classic traceroute. The effect of false links on ISP topology mapping is possibly much worse, because the degrees of a tier-1 ISP’s routers derived from classic traceroute were inflated by a median factor of 2.9 as compared to those inferred with Paris traceroute

Understanding Internet topology: principles, models, and validation

Building on a recent effort that combines a first-principles approach to modeling router-level connectivity with a more pragmatic use of statistics and graph theory, we show in this paper that for the Internet, an improved understanding of its physical infrastructure is possible by viewing the physical connectivity as an annotated graph that delivers raw connectivity and bandwidth to the upper layers in the TCP/IP protocol stack, subject to practical constraints (e.g., router technology) and economic considerations (e.g., link costs). More importantly, by relying on data from Abilene, a Tier-1 ISP, and the Rocketfuel project, we provide empirical evidence in support of the proposed approach and its consistency with networking reality. To illustrate its utility, we: 1) show that our approach provides insight into the origin of high variability in measured or inferred router-level maps; 2) demonstrate that it easily accommodates the incorporation of additional objectives of network design (e.g., robustness to router failure); and 3) discuss how it complements ongoing community efforts to reverse-engineer the Internet

Phase Changes in the Evolution of the IPv4 and IPv6 AS-Level Internet Topologies

In this paper we investigate the evolution of the IPv4 and IPv6 Internet topologies at the autonomous system (AS) level over a long period of time.We provide abundant empirical evidence that there is a phase transition in the growth trend of the two networks. For the IPv4 network, the phase change occurred in 2001. Before then the network's size grew exponentially, and thereafter it followed a linear growth. Changes are also observed around the same time for the maximum node degree, the average node degree and the average shortest path length. For the IPv6 network, the phase change occurred in late 2006. It is notable that the observed phase transitions in the two networks are different, for example the size of IPv6 network initially grew linearly and then shifted to an exponential growth. Our results show that following decades of rapid expansion up to the beginning of this century, the IPv4 network has now evolved into a mature, steady stage characterised by a relatively slow growth with a stable network structure; whereas the IPv6 network, after a slow startup process, has just taken off to a full speed growth. We also provide insight into the possible impact of IPv6-over-IPv4 tunneling deployment scheme on the evolution of the IPv6 network. The Internet topology generators so far are based on an inexplicit assumption that the evolution of Internet follows non-changing dynamic mechanisms. This assumption, however, is invalidated by our results.Our work reveals insights into the Internet evolution and provides inputs to future AS-Level Internet models.Comment: 12 pages, 21 figures; G. Zhang et al.,Phase changes in the evolution of the IPv4 and IPv6 AS-Level Internet topologies, Comput. Commun. (2010

Exploring networks with traceroute-like probes: theory and simulations

Mapping the Internet generally consists in sampling the network from a limited set of sources by using traceroute-like probes. This methodology, akin to the merging of different spanning trees to a set of destination, has been argued to introduce uncontrolled sampling biases that might produce statistical properties of the sampled graph which sharply differ from the original ones. In this paper we explore these biases and provide a statistical analysis of their origin. We derive an analytical approximation for the probability of edge and vertex detection that exploits the role of the number of sources and targets and allows us to relate the global topological properties of the underlying network with the statistical accuracy of the sampled graph. In particular, we find that the edge and vertex detection probability depends on the betweenness centrality of each element. This allows us to show that shortest path routed sampling provides a better characterization of underlying graphs with broad distributions of connectivity. We complement the analytical discussion with a throughout numerical investigation of simulated mapping strategies in network models with different topologies. We show that sampled graphs provide a fair qualitative characterization of the statistical properties of the original networks in a fair range of different strategies and exploration parameters. Moreover, we characterize the level of redundancy and completeness of the exploration process as a function of the topological properties of the network. Finally, we study numerically how the fraction of vertices and edges discovered in the sampled graph depends on the particular deployements of probing sources. The results might hint the steps toward more efficient mapping strategies.Comment: This paper is related to cond-mat/0406404, with explorations of different networks and complementary discussion

Large-Scale Distributed Internet-based Discovery Mechanism for Dynamic Spectrum Allocation

Scarcity of frequencies and the demand for more bandwidth is likely to increase the need for devices that utilize the available frequencies more efficiently. Radios must be able to dynamically find other users of the frequency bands and adapt so that they are not interfered, even if they use different radio protocols. As transmitters far away may cause as much interference as a transmitter located nearby, this mechanism can not be based on location alone. Central databases can be used for this purpose, but require expensive infrastructure and planning to scale. In this paper, we propose a decentralized protocol and architecture for discovering radio devices over the Internet. The protocol has low resource requirements, making it suitable for implementation on limited platforms. We evaluate the protocol through simulation in network topologies with up to 2.3 million nodes, including topologies generated from population patterns in Norway. The protocol has also been implemented as proof-of-concept in real Wi-Fi routers.Comment: Accepted for publication at IEEE DySPAN 201

Deliverable JRA1.1: Evaluation of current network control and management planes for multi-domain network infrastructure

This deliverable includes a compilation and evaluation of available control and management architectures and protocols applicable to a multilayer infrastructure in a multi-domain Virtual Network environment.The scope of this deliverable is mainly focused on the virtualisation of the resources within a network and at processing nodes. The virtualization of the FEDERICA infrastructure allows the provisioning of its available resources to users by means of FEDERICA slices. A slice is seen by the user as a real physical network under his/her domain, however it maps to a logical partition (a virtual instance) of the physical FEDERICA resources. A slice is built to exhibit to the highest degree all the principles applicable to a physical network (isolation, reproducibility, manageability, ...). Currently, there are no standard definitions available for network virtualization or its associated architectures. Therefore, this deliverable proposes the Virtual Network layer architecture and evaluates a set of Management- and Control Planes that can be used for the partitioning and virtualization of the FEDERICA network resources. This evaluation has been performed taking into account an initial set of FEDERICA requirements; a possible extension of the selected tools will be evaluated in future deliverables. The studies described in this deliverable define the virtual architecture of the FEDERICA infrastructure. During this activity, the need has been recognised to establish a new set of basic definitions (taxonomy) for the building blocks that compose the so-called slice, i.e. the virtual network instantiation (which is virtual with regard to the abstracted view made of the building blocks of the FEDERICA infrastructure) and its architectural plane representation. These definitions will be established as a common nomenclature for the FEDERICA project. Other important aspects when defining a new architecture are the user requirements. It is crucial that the resulting architecture fits the demands that users may have. Since this deliverable has been produced at the same time as the contact process with users, made by the project activities related to the Use Case definitions, JRA1 has proposed a set of basic Use Cases to be considered as starting point for its internal studies. When researchers want to experiment with their developments, they need not only network resources on their slices, but also a slice of the processing resources. These processing slice resources are understood as virtual machine instances that users can use to make them behave as software routers or end nodes, on which to download the software protocols or applications they have produced and want to assess in a realistic environment. Hence, this deliverable also studies the APIs of several virtual machine management software products in order to identify which best suits FEDERICA’s needs.Postprint (published version