689 research outputs found
A 0.18µm CMOS UWB wireless transceiver for medical sensing applications
Recently, there is a new trend of demand of a biomedical device that can continuously monitor patient’s vital life index such as heart rate variability (HRV) and respiration rate. This desired device would be compact, wearable, wireless, networkable and low-power to enable proactive home monitoring of vital signs. This device should have a radar sensor portion and a wireless communication link all integrated in one small set. The promising technology that can satisfy these requirements is the impulse radio based Ultra-wideband (IR-UWB) technology.
Since Federal Communications Commission (FCC) released the 3.1GHz-10.6GHz frequency band for UWB applications in 2002 [1], IR-UWB has received significant attention for applications in target positioning and wireless communications. IR-UWB employs extremely narrow Gaussian monocycle pulses or any other forms of short RF pulses to represent information. In this project, an integrated wireless UWB transceiver for the 3.1GHz-10.6GHz IR-UWB medical sensor was developed in the 0.18µm CMOS technology. This UWB transceiver can be employed for both radar sensing and communication purposes. The transceiver applies the On-Off Keying (OOK) modulation scheme to transmit short Gaussian pulse signals. The transmitter output power level is adjustable. The fully integrated UWB transceiver occupies a core area of 0.752mm^2 and the total die area of 1.274mm^2 with the pad ring inserted. The transceiver was simulated with overall power consumption of 40mW for radar sensing. The receiver is very sensitive to weak signals with a sensitivity of -73.01dBm. The average power of a single pulse is 9.8µW. The pulses are not posing any harm to human tissues. The sensing resolution and the target positioning precision are presumably sufficient for heart movement detection purpose in medical applications. This transceiver can also be used for high speed wireless data communications. The data transmission rate of 200 Mbps was achieved with an overall power consumption of 57mW. A combination of sensing and communications can be used to build a low power sensor
A Real Time Locating System based on TDOA estimation of UWB pulse sequences
L'abstract è presente nell'allegato / the abstract is in the attachmen
Cross-Layer Optimization for Power-Efficient and Robust Digital Circuits and Systems
With the increasing digital services demand, performance and power-efficiency
become vital requirements for digital circuits and systems. However, the
enabling CMOS technology scaling has been facing significant challenges of
device uncertainties, such as process, voltage, and temperature variations. To
ensure system reliability, worst-case corner assumptions are usually made in
each design level. However, the over-pessimistic worst-case margin leads to
unnecessary power waste and performance loss as high as 2.2x. Since
optimizations are traditionally confined to each specific level, those safe
margins can hardly be properly exploited.
To tackle the challenge, it is therefore advised in this Ph.D. thesis to
perform a cross-layer optimization for digital signal processing circuits and
systems, to achieve a global balance of power consumption and output quality.
To conclude, the traditional over-pessimistic worst-case approach leads to
huge power waste. In contrast, the adaptive voltage scaling approach saves
power (25% for the CORDIC application) by providing a just-needed supply
voltage. The power saving is maximized (46% for CORDIC) when a more aggressive
voltage over-scaling scheme is applied. These sparsely occurred circuit errors
produced by aggressive voltage over-scaling are mitigated by higher level error
resilient designs. For functions like FFT and CORDIC, smart error mitigation
schemes were proposed to enhance reliability (soft-errors and timing-errors,
respectively). Applications like Massive MIMO systems are robust against lower
level errors, thanks to the intrinsically redundant antennas. This property
makes it applicable to embrace digital hardware that trades quality for power
savings.Comment: 190 page
Development and Characterization of an IoT Network for Agricultural Imaging Applications
Smart agriculture is an increasingly popular field in which the technology of wireless sensor networks (WSN) has played a large role. Significant research has been done at Cal Poly and elsewhere to develop a computer vision (CV) and machine learning (ML) pipeline to monitor crops and accurately predict crop yield numbers. By autonomously providing farmers with this data, both time and money are saved. During the past development of a prediction pipeline, the primary focuses were CV and ML processing while a lack of attention was given to the collection of quality image data. This lack of focus in previous research presented itself as incomplete and inefficient processing models. This thesis work attempts to solve this image acquisition problem through the initial development and design of an Internet of Things (IoT) prototype network to collect consistent image data with no human interaction. The system is developed with the goals of being low-power, low-cost, autonomous, and scalable. The proposed IoT network nodes are based on the ESP32 SoC and communicate over-the-air with the gateway node via Bluetooth Low Energy (BLE). In addition to BLE, the gateway node periodically uplinks image data via Wi-Fi to a cloud server to ensure the accessibility of collected data. This research develops all functionality of the network, comprehensively characterizes the power consumption of IoT nodes, and provides battery life estimates for sensor nodes. The sensor node developed consumes a peak current of 150mA in its active state and sleeps at 162µA in its standby state. Node-to-node BLE data transmission throughput of 220kbps and node-tocloud Wi-Fi data transmission throughput of 709.5kbps is achieved. Sensor node device lifetime is estimated to be 682 days on a 6600mAh LiPo battery while acquiring five images per day. This network can be utilized by any application that requires a wireless sensor network (WSN), high data rates, low power consumption, short range communication, and large amounts of data to be transmitted at low frequency intervals
Preliminary Candidate Advanced Avionics System (PCAAS)
Specifications which define the system functional requirements, the subsystem and interface needs, and other requirements such as maintainability, modularity, and reliability are summarized. A design definition of all required avionics functions and a system risk analysis are presented
Intelligent Circuits and Systems
ICICS-2020 is the third conference initiated by the School of Electronics and Electrical Engineering at Lovely Professional University that explored recent innovations of researchers working for the development of smart and green technologies in the fields of Energy, Electronics, Communications, Computers, and Control. ICICS provides innovators to identify new opportunities for the social and economic benefits of society. This conference bridges the gap between academics and R&D institutions, social visionaries, and experts from all strata of society to present their ongoing research activities and foster research relations between them. It provides opportunities for the exchange of new ideas, applications, and experiences in the field of smart technologies and finding global partners for future collaboration. The ICICS-2020 was conducted in two broad categories, Intelligent Circuits & Intelligent Systems and Emerging Technologies in Electrical Engineering
Field-based measurement of hydrodynamics associated with engineered in-channel structures: the example of fish pass assessment
The construction of fish passes has been a longstanding measure to improve
river ecosystem status by ensuring the passability of weirs, dams and other in-
channel structures for migratory fish. Many fish passes have a low biological
effectiveness because of unsuitable hydrodynamic conditions hindering fish to
rapidly detect the pass entrance. There has been a need for techniques to
quantify the hydrodynamics surrounding fish pass entrances in order to identify
those passes that require enhancement and to improve the design of new
passes. This PhD thesis presents the development of a methodology for the
rapid, spatially continuous quantification of near-pass hydrodynamics in the
field. The methodology involves moving-vessel Acoustic Doppler Current
Profiler (ADCP) measurements in order to quantify the 3-dimensional water
velocity distribution around fish pass entrances. The approach presented in this
thesis is novel because it integrates a set of techniques to make ADCP data
robust against errors associated with the environmental conditions near
engineered in-channel structures. These techniques provide solutions to
(i) ADCP compass errors from magnetic interference, (ii) bias in water velocity
data caused by spatial flow heterogeneity, (iii) the accurate ADCP positioning in
locales with constrained line of sight to navigation satellites, and (iv) the
accurate and cost-effective sensor deployment following pre-defined sampling
strategies. The effectiveness and transferability of the methodology were
evaluated at three fish pass sites covering conditions of low, medium and high
discharge. The methodology outputs enabled a detailed quantitative
characterisation of the fish pass attraction flow and its interaction with other
hydrodynamic features. The outputs are suitable to formulate novel indicators of
hydrodynamic fish pass attractiveness and they revealed the need to refine
traditional fish pass design guidelines
State of the art survey of technologies applicable to NASA's aeronautics, avionics and controls program
The state of the art survey (SOAS) covers six technology areas including flightpath management, aircraft control system, crew station technology, interface & integration technology, military technology, and fundamental technology. The SOAS included contributions from over 70 individuals in industry, government, and the universities
Европейский и национальный контексты в научных исследованиях
В настоящем электронном сборнике «Европейский и национальный контексты в научных исследованиях. Технология» представлены работы молодых ученых по геодезии и картографии, химической технологии и машиностроению, информационным технологиям, строительству и радиотехнике. Предназначены для работников образования, науки и производства. Будут полезны студентам, магистрантам и аспирантам университетов.=In this Electronic collected materials “National and European dimension in research. Technology” works in the fields of geodesy, chemical technology, mechanical engineering, information technology, civil engineering, and radio-engineering are presented. It is intended for trainers, researchers and professionals. It can be useful for university graduate and post-graduate students
Emerging Communications for Wireless Sensor Networks
Wireless sensor networks are deployed in a rapidly increasing number of arenas, with uses ranging from healthcare monitoring to industrial and environmental safety, as well as new ubiquitous computing devices that are becoming ever more pervasive in our interconnected society. This book presents a range of exciting developments in software communication technologies including some novel applications, such as in high altitude systems, ground heat exchangers and body sensor networks. Authors from leading institutions on four continents present their latest findings in the spirit of exchanging information and stimulating discussion in the WSN community worldwide
- …