Adaptive nonlinear interference suppressor for cognitive radio applications

To utilize the radio frequency spectrum efficiently a Cognitive Radio (CR) can operate as a secondary user in a frequency band which is licensed to a primary user. To this end, the CR must sense the spectrum continuously to find empty frequency channels for its transmission. The transmitted signal by the local transmitter of the CR, however, induces a strong local interference in the local receiver of the CR. Hence a half-duplex transceiver is used where the transmit and sense operations are done in separate time slots. The time-slotted operation though, reduces the throughput of the CR. This paper proposes application of an adaptive Nonlinear Interference Suppressor (NIS) to suppress this strong local interference to enable simultaneous transmit and sense. We present experimental results of a transceiver testbed that uses an implementation of the NIS, fabricated in 140 nm CMOS technology. These experiments show that the NIS can substantially suppress the local interference with low complexity and power consumption

A Fully-Integrated Reconfigurable Dual-Band Transceiver for Short Range Wireless Communications in 180 nm CMOS

© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.A fully-integrated reconfigurable dual-band (760-960 MHz and 2.4-2.5 GHz) transceiver (TRX) for short range wireless communications is presented. The TRX consists of two individually-optimized RF front-ends for each band and one shared power-scalable analog baseband. The sub-GHz receiver has achieved the maximum 75 dBc 3rd-order harmonic rejection ratio (HRR3) by inserting a Q-enhanced notch filtering RF amplifier (RFA). In 2.4 GHz band, a single-ended-to-differential RFA with gain/phase imbalance compensation is proposed in the receiver. A ΣΔ fractional-N PLL frequency synthesizer with two switchable Class-C VCOs is employed to provide the LOs. Moreover, the integrated multi-mode PAs achieve the output P1dB (OP1dB) of 16.3 dBm and 14.1 dBm with both 25% PAE for sub-GHz and 2.4 GHz bands, respectively. A power-control loop is proposed to detect the input signal PAPR in real-time and flexibly reconfigure the PA's operation modes to enhance the back-off efficiency. With this proposed technique, the PAE of the sub-GHz PA is improved by x3.24 and x1.41 at 9 dB and 3 dB back-off powers, respectively, and the PAE of the 2.4 GHz PA is improved by x2.17 at 6 dB back-off power. The presented transceiver has achieved comparable or even better performance in terms of noise figure, HRR, OP1dB and power efficiency compared with the state-of-the-art.Peer reviewe

Advanced DSP Techniques for High-Capacity and Energy-Efficient Optical Fiber Communications

The rapid proliferation of the Internet has been driving communication networks closer and closer to their limits, while available bandwidth is disappearing due to an ever-increasing network load. Over the past decade, optical fiber communication technology has increased per fiber data rate from 10 Tb/s to exceeding 10 Pb/s. The major explosion came after the maturity of coherent detection and advanced digital signal processing (DSP). DSP has played a critical role in accommodating channel impairments mitigation, enabling advanced modulation formats for spectral efficiency transmission and realizing flexible bandwidth. This book aims to explore novel, advanced DSP techniques to enable multi-Tb/s/channel optical transmission to address pressing bandwidth and power-efficiency demands. It provides state-of-the-art advances and future perspectives of DSP as well

Research and design of high-speed advanced analogue front-ends for fibre-optic transmission systems

In the last decade, we have witnessed the emergence of large, warehouse-scale data centres which have enabled new internet-based software applications such as cloud computing, search engines, social media, e-government etc. Such data centres consist of large collections of servers interconnected using short-reach (reach up to a few hundred meters) optical interconnect. Today, transceivers for these applications achieve up to 100Gb/s by multiplexing 10x 10Gb/s or 4x 25Gb/s channels. In the near future however, data centre operators have expressed a need for optical links which can support 400Gb/s up to 1Tb/s. The crucial challenge is to achieve this in the same footprint (same transceiver module) and with similar power consumption as today’s technology. Straightforward scaling of the currently used space or wavelength division multiplexing may be difficult to achieve: indeed a 1Tb/s transceiver would require integration of 40 VCSELs (vertical cavity surface emitting laser diode, widely used for short‐reach optical interconnect), 40 photodiodes and the electronics operating at 25Gb/s in the same module as today’s 100Gb/s transceiver. Pushing the bit rate on such links beyond today’s commercially available 100Gb/s/fibre will require new generations of VCSELs and their driver and receiver electronics. This work looks into a number of state‐of-the-art technologies and investigates their performance restraints and recommends different set of designs, specifically targeting multilevel modulation formats. Several methods to extend the bandwidth using deep submicron (65nm and 28nm) CMOS technology are explored in this work, while also maintaining a focus upon reducing power consumption and chip area. The techniques used were pre-emphasis in rising and falling edges of the signal and bandwidth extensions by inductive peaking and different local feedback techniques. These techniques have been applied to a transmitter and receiver developed for advanced modulation formats such as PAM-4 (4 level pulse amplitude modulation). Such modulation format can increase the throughput per individual channel, which helps to overcome the challenges mentioned above to realize 400Gb/s to 1Tb/s transceivers

Enabling Technologies for Optical Data Center Networks: Spatial Division Multiplexing

With the continuously growing popularity of cloud services, the traffic volume inside the\ua0data\ua0centers is dramatically increasing. As a result, a scalable and efficient infrastructure\ua0for\ua0data\ua0center\ua0networks\ua0(DCNs) is required. The current\ua0optical\ua0DCNs using either individual fibers or fiber ribbons are costly, bulky, hard to manage, and not scalable.\ua0Spatial\ua0division\ua0multiplexing\ua0(SDM) based on multicore or multimode (few-mode) fibers is recognized as a promising technology to increase the\ua0spatial\ua0efficiency\ua0for\ua0optical\ua0DCNs, which opens a new way towards high capacity and scalability. This tutorial provides an overview of the components, transmission options, and interconnect architectures\ua0for\ua0SDM-based DCNs, as well as potential technical challenges and future directions. It also covers the co-existence of SDM and other\ua0multiplexing\ua0techniques, such as wavelength-division\ua0multiplexing\ua0and flexible spectrum\ua0multiplexing, in\ua0optical\ua0DCNs

Roadmap of optical communications

© 2016 IOP Publishing Ltd. Lightwave communications is a necessity for the information age. Optical links provide enormous bandwidth, and the optical fiber is the only medium that can meet the modern society's needs for transporting massive amounts of data over long distances. Applications range from global high-capacity networks, which constitute the backbone of the internet, to the massively parallel interconnects that provide data connectivity inside datacenters and supercomputers. Optical communications is a diverse and rapidly changing field, where experts in photonics, communications, electronics, and signal processing work side by side to meet the ever-increasing demands for higher capacity, lower cost, and lower energy consumption, while adapting the system design to novel services and technologies. Due to the interdisciplinary nature of this rich research field, Journal of Optics has invited 16 researchers, each a world-leading expert in their respective subfields, to contribute a section to this invited review article, summarizing their views on state-of-the-art and future developments in optical communications

Coherent Optical OFDM Modem Employing Artificial Neural Networks for Dispersion and Nonlinearity Compensation in a Long-Haul Transmission System

In order to satisfy the ever increasing demand for the bandwidth requirement in broadband services the optical orthogonal frequency division multiplexing (OOFDM) scheme is being considered as a promising technique for future high-capacity optical networks. The aim of this thesis is to investigate, theoretically, the feasibility of implementing the coherent optical OFDM (CO-OOFDM) technique in long haul transmission networks. For CO-OOFDM and Fast-OFDM systems a set of modulation formats dependent analogue to digital converter (ADC) clipping ratio and the quantization bit have been identified, moreover, CO-OOFDM is more resilient to the chromatic dispersion (CD) when compared to the bandwidth efficient Fast-OFDM scheme. For CO-OOFDM systems numerical simulations are undertaken to investigate the effect of the number of sub-carriers, the cyclic prefix (CP), and ADC associated parameters such as the sampling speed, the clipping ratio, and the quantisation bit on the system performance over single mode fibre (SMF) links for data rates up to 80 Gb/s. The use of a large number of sub-carriers is more effective in combating the fibre CD compared to employing a long CP. Moreover, in the presence of fibre non-linearities identifying the optimum number of sub-carriers is a crucial factor in determining the modem performance. For a range of signal data rates up to 40 Gb/s, a set of data rate and transmission distance-dependent optimum ADC parameters are identified in this work. These parameters give rise to a negligible clipping and quantisation noise, moreover, ADC sampling speed can increase the dispersion tolerance while transmitting over SMF links. In addition, simulation results show that the use of adaptive modulation schemes improves the spectrum usage efficiency, thus resulting in higher tolerance to the CD when compared to the case where identical modulation formats are adopted across all sub-carriers. For a given transmission distance utilizing an artificial neural networks (ANN) equalizer improves the system bit error rate (BER) performance by a factor of 50% and 70%, respectively when considering SMF firstly CD and secondly nonlinear effects with CD. Moreover, for a fixed BER of 10-3 utilizing ANN increases the transmission distance by 1.87 times and 2 times, respectively while considering SMF CD and nonlinear effects. The proposed ANN equalizer performs more efficiently in combating SMF non-linearities than the previously published Kerr nonlinearity electrical compensation technique by a factor of 7