14,543 research outputs found
Digital signal processing in radio receivers and transmitters
The interface between analog and digital signal processing paths in radio receivers and transmitters is steadily migrating toward the antenna as engineers learn to combine the unique attributes and capabilities of DSP with those of traditional communication system designs to achieve system s with superior and broadened capabilities while reducing system cost. Digital signal processing (DSP) techniques are rapidly being applied to many signal conditioning and signal processing tasks traditionally performed by analog components and subsystems in RF communication receivers and transmitters [1±4]. The incentive to replace analog implementations of signal processing functions with DSP-based processing includes reduced cost, enhanced performance, improved reliability, ease of manufacturing and maintenance, and operating ¯exibility and con® gurabilit
Achievable Rates of Multi-User Millimeter Wave Systems with Hybrid Precoding
Millimeter wave (mmWave) systems will likely employ large antenna arrays at
both the transmitters and receivers. A natural application of antenna arrays is
simultaneous transmission to multiple users, which requires multi-user
precoding at the transmitter. Hardware constraints, however, make it difficult
to apply conventional lower frequency MIMO precoding techniques at mmWave. This
paper proposes and analyzes a low complexity hybrid analog/digital beamforming
algorithm for downlink multi-user mmWave systems. Hybrid precoding involves a
combination of analog and digital processing that is motivated by the
requirement to reduce the power consumption of the complete radio frequency and
mixed signal hardware. The proposed algorithm configures hybrid precoders at
the transmitter and analog combiners at multiple receivers with a small
training and feedback overhead. For this algorithm, we derive a lower bound on
the achievable rate for the case of single-path channels, show its asymptotic
optimality at large numbers of antennas, and make useful insights for more
general cases. Simulation results show that the proposed algorithm offers
higher sum rates compared with analog-only beamforming, and approaches the
performance of the unconstrained digital precoding solutions.Comment: to be presented in IEEE ICC 2015 - Workshop on 5G & Beyond - Enabling
Technologies and Application
AirSync: Enabling Distributed Multiuser MIMO with Full Spatial Multiplexing
The enormous success of advanced wireless devices is pushing the demand for
higher wireless data rates. Denser spectrum reuse through the deployment of
more access points per square mile has the potential to successfully meet the
increasing demand for more bandwidth. In theory, the best approach to density
increase is via distributed multiuser MIMO, where several access points are
connected to a central server and operate as a large distributed multi-antenna
access point, ensuring that all transmitted signal power serves the purpose of
data transmission, rather than creating "interference." In practice, while
enterprise networks offer a natural setup in which distributed MIMO might be
possible, there are serious implementation difficulties, the primary one being
the need to eliminate phase and timing offsets between the jointly coordinated
access points.
In this paper we propose AirSync, a novel scheme which provides not only time
but also phase synchronization, thus enabling distributed MIMO with full
spatial multiplexing gains. AirSync locks the phase of all access points using
a common reference broadcasted over the air in conjunction with a Kalman filter
which closely tracks the phase drift. We have implemented AirSync as a digital
circuit in the FPGA of the WARP radio platform. Our experimental testbed,
comprised of two access points and two clients, shows that AirSync is able to
achieve phase synchronization within a few degrees, and allows the system to
nearly achieve the theoretical optimal multiplexing gain. We also discuss MAC
and higher layer aspects of a practical deployment. To the best of our
knowledge, AirSync offers the first ever realization of the full multiuser MIMO
gain, namely the ability to increase the number of wireless clients linearly
with the number of jointly coordinated access points, without reducing the per
client rate.Comment: Submitted to Transactions on Networkin
Digital Predistortion in Large-Array Digital Beamforming Transmitters
In this article, we propose a novel digital predistortion (DPD) solution that
allows to considerably reduce the complexity resulting from linearizing a set
of power amplifiers (PAs) in single-user large-scale digital beamforming
transmitters. In contrast to current state-of-the art solutions that assume a
dedicated DPD per power amplifier, which is unfeasible in the context of large
antenna arrays, the proposed solution only requires a single DPD in order to
linearize an arbitrary number of power amplifiers. To this end, the proposed
DPD predistorts the signal at the input of the digital precoder based on
minimizing the nonlinear distortion of the combined signal at the intended
receiver direction. This is a desirable feature, since the resulting emissions
in other directions get partially diluted due to less coherent superposition.
With this approach, only a single DPD is required, yielding great complexity
and energy savings.Comment: 8 pages, Accepted for publication in Asilomar Conference on Signals,
Systems, and Computer
Low-frequency radio navigation system
A method of continuous wave navigation using four transmitters operating at sufficiently low frequencies to assure essentially pure groundwave operation is described. The transmitters are keyed to transmit constant bursts (1/4 sec) in a time-multiplexed pattern with phase modulation of at least one transmitter for identification of the transmitters and with the ability to identify the absolute phase of the modulated transmitter and the ability to modulate low rate data for transmission. The transmitters are optimally positioned to provide groundwave coverage over a service region of about 50 by 50 km for the frequencies selected in the range of 200 to 500 kHz, but their locations are not critical because of the beneficial effect of overdetermination of position of a receiver made possible by the fourth transmitter. Four frequencies are used, at least two of which are selected to provide optimal resolution. All transmitters are synchronized to an average phase as received by a monitor receiver
Fish tracking technology development. Phase 1 project definition desk study
The document reports on Phase 1 of a definition study to appraise the options to develop fish tracking equipment, in particular tags and data logging systems in order to improve the efficiency of the Environment Agency's tracking studies and to obtain a greater understanding of fish
biology.
Covered in this report are radio telemetry, audio telemetry, High Resolution Position Fixing, data storage and archival tags and other fish tracking systems such as biosonics
Signal-Aligned Network Coding in K-User MIMO Interference Channels with Limited Receiver Cooperation
In this paper, we propose a signal-aligned network coding (SNC) scheme for
K-user time-varying multiple-input multiple-output (MIMO) interference channels
with limited receiver cooperation. We assume that the receivers are connected
to a central processor via wired cooperation links with individual limited
capacities. Our SNC scheme determines the precoding matrices of the
transmitters so that the transmitted signals are aligned at each receiver. The
aligned signals are then decoded into noiseless integer combinations of
messages, also known as network-coded messages, by physical-layer network
coding. The key idea of our scheme is to ensure that independent integer
combinations of messages can be decoded at the receivers. Hence the central
processor can recover the original messages of the transmitters by solving the
linearly independent equations. We prove that our SNC scheme achieves full
degrees of freedom (DoF) by utilizing signal alignment and physical-layer
network coding. Simulation results show that our SNC scheme outperforms the
compute-and-forward scheme in the finite SNR regime of the two-user and the
three-user cases. The performance improvement of our SNC scheme mainly comes
from efficient utilization of the signal subspaces for conveying independent
linear equations of messages to the central processor.Comment: 12 pages, 4 figures, submitted to the IEEE Transactions on Vehicular
Technolog
Analysis of DVB-H network coverage with the application of transmit diversity
This paper investigates the effects of the Cyclic Delay Diversity (CDD) transmit diversity scheme on DVB-H networks. Transmit diversity improves reception and Quality of Service (QoS) in areas of poor coverage such as sparsely populated or obscured locations. The technique not only povides robust reception in mobile environments thus improving QoS, but it also reduces network costs in terms of the transmit power, number of
infrastructure elements, antenna height and the frequency reuse factor over indoor and outdoor environments. In this paper, the benefit and effectiveness of CDD transmit diversity is tackled
through simulation results for comparison in several scenarios of coverage in DVB-H networks. The channel model used in the simulations is based on COST207 and a basic radio planning
technique is used to illustrate the main principles developed in this paper. The work reported in this paper was supported by
the European Commission IST project—PLUTO (Physical Layer DVB Transmission Optimization)
Distributed multi-user MIMO transmission using real-time sigma-delta-over-fiber for next generation fronthaul interface
To achieve the massive device connectivity and high data rate demanded by 5G, wireless transmission with wider signal bandwidths and higher-order multiple-input multiple-output (MIMO) is inevitable. This work demonstrates a possible function split option for the next generation fronthaul interface (NGFI). The proof-of-concept downlink architecture consists of real-time sigma-delta modulated signal over fiber (SDoF) links in combination with distributed multi-user (MU) MIMO transmission. The setup is fully implemented using off-the-shelf and in-house developed components. A single SDoF link achieves an error vector magnitude (EVM) of 3.14% for a 163.84 MHz-bandwidth 256-QAM OFDM signal (958.64 Mbps) with a carrier frequency around 3.5 GHz transmitted over 100 m OM4 multi-mode fiber at 850 nm using a commercial QSFP module. The centralized architecture of the proposed setup introduces no frequency asynchronism among remote radio units. For most cases, the 2 x 2 MU-MIMO transmission has little performance degradation compared to SISO, 0.8 dB EVM degradation for 40.96 MHz-bandwidth signals and 1.4 dB for 163.84 MHz-bandwidth on average, implying that the wireless spectral efficiency almost doubles by exploiting spatial multiplexing. A 1.4 Gbps data rate (720 Mbps per user, 163.84 MHz-bandwidth, 64-QAM) is reached with an average EVM of 6.66%. The performance shows that this approach is feasible for the high-capacity hot-spot scenario
- …