Discrete-Time Control Design for Piezo-Actuated Positioning Systems

芝浦工業大学2018年

Advanced Mobile Robotics: Volume 3

Mobile robotics is a challenging field with great potential. It covers disciplines including electrical engineering, mechanical engineering, computer science, cognitive science, and social science. It is essential to the design of automated robots, in combination with artificial intelligence, vision, and sensor technologies. Mobile robots are widely used for surveillance, guidance, transportation and entertainment tasks, as well as medical applications. This Special Issue intends to concentrate on recent developments concerning mobile robots and the research surrounding them to enhance studies on the fundamental problems observed in the robots. Various multidisciplinary approaches and integrative contributions including navigation, learning and adaptation, networked system, biologically inspired robots and cognitive methods are welcome contributions to this Special Issue, both from a research and an application perspective

Advanced Control of Piezoelectric Actuators.

168 p.A lo largo de las últimas décadas, la ingeniería de precisión ha tenido un papel importante como tecnología puntera donde la tendencia a la reducción de tamaño de las herramientas industriales ha sido clave. Los procesos industriales comenzaron a demandar precisión en el rango de nanómetros a micrómetros. Pese a que los actuadores convencionales no pueden reducirse lo suficiente ni lograr tal exactitud, los actuadores piezoeléctricos son una tecnología innovadora en este campo y su rendimiento aún está en estudio en la comunidad científica. Los actuadores piezoeléctricos se usan comúnmente en micro y nanomecatrónica para aplicaciones de posicionamiento debido a su alta resolución y fuerza de actuación (pueden llegar a soportar fuerzas de hasta 100 Newtons) en comparación con su tamaño. Todas estas características también se pueden combinar con una actuación rápida y rigidez, según los requisitos de la aplicación. Por lo tanto, con estas características, los actuadores piezoeléctricos pueden ser utilizados en una amplia variedad de aplicaciones industriales. Los efectos negativos, como la fluencia, vibraciones y la histéresis, se estudian comúnmente para mejorar el rendimiento cuando se requiere una alta precisión. Uno de los efectos que más reduce el rendimiento de los PEA es la histéresis. Esto se produce especialmente cuando el actuador está en una aplicación de guiado, por lo que la histéresis puede inducir errores que pueden alcanzar un valor de hasta 22%. Este fenómeno no lineal se puede definir como un efecto generado por la combinación de acciones mecánicas y eléctricas que depende de estados previos. La histéresis se puede reducir principalmente mediante dos estrategias: rediseño de materiales o algoritmos de control tipo feedback. El rediseño de material comprende varias desventajas por lo que el motivo principal de esta tesis está enfocado al diseño de algoritmos de control para reducir la histéresis. El objetivo principal de esta tesis es el desarrollo de estrategias de control avanzadas que puedan mejorar la precisión de seguimiento de los actuadores piezoeléctricos comerciale

Recent Progress in Electrical Generators for Oceanic Wave Energy Conversion

Oceanic wave energy extraction through electrical generator is one of the most interesting topics in the field of power engineering. Almost all the existing relevant review paper focus on electrical generator with the working principle of electromagnetic induction or piezoelectric or triboelectric effect. In this paper, all the existing types (based on principle of operation) of electrical generator used for wave power harvesting are discussed. This paper not only covers recent progress in electrical power generation by electro-magnetic induction, piezoelectric generator, and electrostatic induction, but also presents critical comparative review as well where suitable use and weakness of each type of generators are discussed. Moreover, the application of advanced magnetic core, winding, and permanent magnets are discussed with extensive explanation which are not focused in the existing reviews. Various new constructional features of the electrical generators such as split translator flux switching, two-point absorber, triangular coil, dual port linear generator, piezoelectric, triboelectric nanogenerator, etc. are highlighted with principles of operation. It also includes emerging human intervened optimization method for determining optimum shape of generator and cooling system which is necessary to prevent demagnetization of the permanent magnet. Finally, the way of supply the generated electrical power form the generator to load/grid is thoroughly described in a separate section that would be obvious for successful operation. The comparison among all types of generators in terms of output voltage, current, scale of power production, power-frequency characteristics, power density, cascading, and approaches are tabulated in this paper

Finite-time sliding mode control strategies and their applications

In many engineering applications, faster convergence is always sought, such as manufacturing plants, defence sectors, mechatronic systems. Nowadays, most of the physical systems are operated in a closed-loop environment in conjunction with a controller. Therefore, the controller plays a critical role in determining the speed of the convergence of the entire closed-loop system. Linear controllers are quite popular for their simple design. However, linear controllers provide asymptotic convergence speed, i.e., the actual convergence is obtained when the time reaches an infinitely large amount. Furthermore, linear controllers are not entirely robust in the presence of non-vanishing types of disturbances. It is always important to design robust controllers because of the presence of model imperfections and unknown disturbances in almost all kinds of systems. Therefore, it is necessary to design controllers that are not only robust, but will also provide faster convergence speed. Out of many robust non-linear control strategies, a further development in sliding mode control (SMC) strategy is considered in this thesis because of its simplicity and robustness. There have been many contributions in the SMC field in the last decade. Many existingmethods are available for the SMC design for second-order systems. However, the SMC design becomes extremely complex if the system order increases. Therefore, the first part of this thesis focuses on developing arbitrary-order SMC strategies with a relatively simpler design while providing finite-time convergence. Novel methods are developed with both continuous and discontinuous control structures. The second part of this thesis focuses on developing algorithms to provide even faster convergence speed than that of finite-time convergent algorithms. Some practical applications need strict constraints on time response due to security reasons or to ameliorate the productiveness. For example, a missile or any aerial launch vehicle can be hugely affected by a strong wind gust deviating it from the desired trajectory, thus yielding a significant degree of initial tracking error. It is worth mentioning that the state convergence achieved in SMC during sliding can be either asymptotic or in finite-time, depending on the selection of the surface. Furthermore, it primarily depends on the initial conditions of the states. This provides a motivation to focus on developing SMC controllers where the convergence time does not depend on initial conditions, and a well-defined theoretical analysis is provided in the thesis regarding arbitrary-order fixed-time convergent SMC design. Subsequently, a predefined-time convergent second-order differentiator and observer are proposed. The main advantage of the proposed differentiator is to calculate the derivative of a given signal in fixed-time while the least upper bound of the fixed stabilisation time is equal to a tunable parameter. Similarly, the proposed predefined-time observer is robust with respect to bounded uncertainties and can also be used to estimate the uncertainties. The final part of the thesis is focused on the applications of the proposed algorithms. First of all, a novel third-order SMC is designed for a piezoelectric-driven motion systems achieving better accuracy and control performance. Later on, an experimental validation of the proposed controller is conducted on an induction motor setup. Later, a fixed-time convergent algorithm is proposed for an automatic generation control (AGC) of a multi-area interconnected power system while considering the non-linearities in the dynamic system. The final part is focused on developing fixed-time convergent algorithms in a co-operative environment. The reason for selecting such a system is the presence of the highest degree of uncertainties. To this end, a novel distributed algorithm is developed for achieving second-order consensus in the multiagent systems by designing a full-order fixed-time convergent sliding surface

The Roles of Piezoelectric Ultrasonic Motors in Industry 4.0 Era: Opportunities & Challenges

Piezoelectric Ultrasonic motors (USM) are based on the principle of converse piezoelectric effect i.e., vibrations occur when an electrical field is applied to piezoelectric materials. USMs have been studied several decades for their advantages over traditional electromagnetic motors. Despite having many advantages, they have several challenges too. Recently many researchers have started focusing on Industry 4.0 or Fourth Industrial revolution phase of the industry which mostly emphasis on digitization & interconnection of the entities throughout the life cycle of the product in an industrial network to get the best possible output. Industry 4.0 utilizes various advanced tools for carrying out the nexus between the entities & bringing up them on digital platform. The studies of the role of USMs in Industry 4.0 scenario has never been done till now & this article fills that gap by analyzing the piezoelectric ultrasonic motors in depth & breadth in the background of Industry 4.0. This article delivers the novel working principle, illustrates examples for effective utilization of USMs, so that it can buttress the growth of Industry 4.0 Era & on the other hand it also analyses the key Industry 4.0 enabling technologies to improve the performance of the USMs

Nonlinear ESO-based vibration control for an all-clamped piezoelectric plate with disturbances and time delay: design and hardware implementation

Considering the problems of model uncertainties, higher harmonics, uncertain boundary conditions, external excitations and system time delay in practical vibration control system, a novel active vibration control method is proposed to suppress the vibration of a thin plate structure with acceleration sensor and piezoelectric bimorph actuator in this paper. First, a nonlinear extended state observer (NESO)-based controller is designed to ensure the anti-disturbance performance of the structural vibration control system. Then, an enhanced differentiator-based time delay compensation method is introduced to improve the vibration suppression performance of the NESO-based controller. A real time hardware-in-the-loop benchmark for an all-clamped piezoelectric thin plate is designed to verify and compare the performance of the developed controller against conventional ESO-based methods (linear ESO with/without time delay compensation, NESO without time compensation). The best vibration suppression and disturbance rejection performance of the proposed NESO-based controller with an enhanced time delay compensator is verified in the comparative experimental results. This work is able to provide practitioners with vital guidance in designing active vibration control system in the presence of disturbances and time delay

Optimized state feedback regulation of 3DOF helicopter system via extremum seeking

In this paper, an optimized state feedback regulation of a 3 degree of freedom (DOF) helicopter is designed via extremum seeking (ES) technique. Multi-parameter ES is applied to optimize the tracking performance via tuning State Vector Feedback with Integration of the Control Error (SVFBICE). Discrete multivariable version of ES is developed to minimize a cost function that measures the performance of the controller. The cost function is a function of the error between the actual and desired axis positions. The controller parameters are updated online as the optimization takes place. This method significantly decreases the time in obtaining optimal controller parameters. Simulations were conducted for the online optimization under both fixed and varying operating conditions. The results demonstrate the usefulness of using ES for preserving the maximum attainable performance