1,387 research outputs found
A low-power opportunistic communication protocol for wearable applications
© 2015 IEEE.Recent trends in wearable applications demand flexible architectures being able to monitor people while they move in free-living environments. Current solutions use either store-download-offline processing or simple communication schemes with real-time streaming of sensor data. This limits the applicability of wearable applications to controlled environments (e.g, clinics, homes, or laboratories), because they need to maintain connectivity with the base station throughout the monitoring process. In this paper, we present the design and implementation of an opportunistic communication framework that simplifies the general use of wearable devices in free-living environments. It relies on a low-power data collection protocol that allows the end user to opportunistically, yet seamlessly manage the transmission of sensor data. We validate the feasibility of the framework by demonstrating its use for swimming, where the normal wireless communication is constantly interfered by the environment
Short Packet Structure for Ultra-Reliable Machine-type Communication: Tradeoff between Detection and Decoding
Machine-type communication requires rethinking of the structure of short
packets due to the coding limitations and the significant role of the control
information. In ultra-reliable low-latency communication (URLLC), it is crucial
to optimally use the limited degrees of freedom (DoFs) to send data and control
information. We consider a URLLC model for short packet transmission with
acknowledgement (ACK). We compare the detection/decoding performance of two
short packet structures: (1) time-multiplexed detection sequence and data; and
(2) structure in which both packet detection and data decoding use all DoFs.
Specifically, as an instance of the second structure we use superimposed
sequences for detection and data. We derive the probabilities of false alarm
and misdetection for an AWGN channel and numerically minimize the packet error
probability (PER), showing that for delay-constrained data and ACK exchange,
there is a tradeoff between the resources spent for detection and decoding. We
show that the optimal PER for the superimposed structure is achieved for higher
detection overhead. For this reason, the PER is also higher than in the
preamble case. However, the superimposed structure is advantageous due to its
flexibility to achieve optimal operation without the need to use multiple
codebooks.Comment: Accepted at ICASSP 2018, special session on "Signal Processing for
Machine-Type Communications
Millimeter-Wave System for High Data Rate Indoor Communications
This paper presents the realization of a wireless Gigabit Ethernet
communication system operating in the 60 GHz band. The system architecture uses
a single carrier modulation. A differential encoded binary phase shift keying
modulation and a differential demodulation scheme are adopted for the
intermediate frequency blocks. The baseband blocks use Reed- Solomon RS (255,
239) coding and decoding for channel forward error correction (FEC). First
results of bit error rate (BER) measurements at 875 Mbps, without channel
coding, are presented for different antennas.Comment: 5 page
Single Carrier Architecture for High Data Rate Wireless PAN Communications System
A 60 GHz wireless Gigabit Ethernet (G.E.) communication system is developed
at IETR. As the 60 GHz radio link operates only in a single-room configuration,
an additional Radio over Fibre (RoF) link is used to ensure the communications
in all the rooms of a residential environment. The realized system covers 2 GHz
bandwidth. Due to the hardware constraints, a symbol rate at 875 Mbps is
attained using simple single carrier architecture. In the baseband (BB)
processing block, an original byte/frame synchronization process is designed to
provide a smaller value of the preamble missing detection and false alarm
probabilities. Bit error rate (BER) measurements have been realized in a large
gym for line-of-sight (LOS) conditions. A Tx-Rx distance greater than 30 meters
was attained with low BER using high gain antennas and forward error correction
RS (255, 239) coding.Comment: Design, Experimentation, Measurement, Performance; IWCMC '10, Caen :
France (2010
On a Hybrid Preamble/Soft-Output Demapper Approach for Time Synchronization for IEEE 802.15.6 Narrowband WBAN
In this paper, we present a maximum likelihood (ML) based time
synchronization algorithm for Wireless Body Area Networks (WBAN). The proposed
technique takes advantage of soft information retrieved from the soft demapper
for the time delay estimation. This algorithm has a low complexity and is
adapted to the frame structure specified by the IEEE 802.15.6 standard for the
narrowband systems. Simulation results have shown good performance which
approach the theoretical mean square error limit bound represented by the
Cramer Rao Bound (CRB)
Selective Jamming of LoRaWAN using Commodity Hardware
Long range, low power networks are rapidly gaining acceptance in the Internet
of Things (IoT) due to their ability to economically support long-range sensing
and control applications while providing multi-year battery life. LoRa is a key
example of this new class of network and is being deployed at large scale in
several countries worldwide. As these networks move out of the lab and into the
real world, they expose a large cyber-physical attack surface. Securing these
networks is therefore both critical and urgent. This paper highlights security
issues in LoRa and LoRaWAN that arise due to the choice of a robust but slow
modulation type in the protocol. We exploit these issues to develop a suite of
practical attacks based around selective jamming. These attacks are conducted
and evaluated using commodity hardware. The paper concludes by suggesting a
range of countermeasures that can be used to mitigate the attacks.Comment: Mobiquitous 2017, November 7-10, 2017, Melbourne, VIC, Australi
A VHDL-AMS Simulation Environment for an UWB Impulse Radio Transceiver
Ultra-Wide-Band (UWB) communication based on the impulse radio paradigm is becoming increasingly popular. According to the IEEE 802.15 WPAN Low Rate Alternative PHY Task Group 4a, UWB will play a major role in localization applications, due to the high time resolution of UWB signals which allow accurate indirect measurements of distance between transceivers. Key for the successful implementation of UWB transceivers is the level of integration that will be reached, for which a simulation environment that helps take appropriate design decisions is crucial. Owing to this motivation, in this paper we propose a multiresolution UWB simulation environment based on the VHDL-AMS hardware description language, along with a proper methodology which helps tackle the complexity of designing a mixed-signal UWB System-on-Chip. We applied the methodology and used the simulation environment for the specification and design of an UWB transceiver based on the energy detection principle. As a by-product, simulation results show the effectiveness of UWB in the so-called ranging application, that is the accurate evaluation of the distance between a couple of transceivers using the two-way-ranging metho
- …