AoA-aware Probabilistic Indoor Location Fingerprinting using Channel State Information

With expeditious development of wireless communications, location fingerprinting (LF) has nurtured considerable indoor location based services (ILBSs) in the field of Internet of Things (IoT). For most pattern-matching based LF solutions, previous works either appeal to the simple received signal strength (RSS), which suffers from dramatic performance degradation due to sophisticated environmental dynamics, or rely on the fine-grained physical layer channel state information (CSI), whose intricate structure leads to an increased computational complexity. Meanwhile, the harsh indoor environment can also breed similar radio signatures among certain predefined reference points (RPs), which may be randomly distributed in the area of interest, thus mightily tampering the location mapping accuracy. To work out these dilemmas, during the offline site survey, we first adopt autoregressive (AR) modeling entropy of CSI amplitude as location fingerprint, which shares the structural simplicity of RSS while reserving the most location-specific statistical channel information. Moreover, an additional angle of arrival (AoA) fingerprint can be accurately retrieved from CSI phase through an enhanced subspace based algorithm, which serves to further eliminate the error-prone RP candidates. In the online phase, by exploiting both CSI amplitude and phase information, a novel bivariate kernel regression scheme is proposed to precisely infer the target's location. Results from extensive indoor experiments validate the superior localization performance of our proposed system over previous approaches

Wi-Fi Sensing for Indoor Localization via Channel State Information: A Survey

Wireless Fidelity (Wi-Fi) sensing utilization has been widespread, especially for human behavior/activity recognition. It provides high flexibility since it does not require the person/object to carry any device known as device-free. This "passive" concept is also helpful for another application of Wi-Fi sensing, i.e., indoor localization. The "sensing" is conducted using particular parameters extracted from communication links of Wi-Fi devices, i.e., channel state information (CSI). This paper explores the recent trends in CSI-based indoor localization with Wi-Fi technology as its core, including their advantages, challenges, and future directions. We found tremendous benefits can be gained by employing Wi-Fi sensing in localization supported by its performance and integrability for other intelligent systems for activity recognition

Thirty Years of Machine Learning: The Road to Pareto-Optimal Wireless Networks

Future wireless networks have a substantial potential in terms of supporting a broad range of complex compelling applications both in military and civilian fields, where the users are able to enjoy high-rate, low-latency, low-cost and reliable information services. Achieving this ambitious goal requires new radio techniques for adaptive learning and intelligent decision making because of the complex heterogeneous nature of the network structures and wireless services. Machine learning (ML) algorithms have great success in supporting big data analytics, efficient parameter estimation and interactive decision making. Hence, in this article, we review the thirty-year history of ML by elaborating on supervised learning, unsupervised learning, reinforcement learning and deep learning. Furthermore, we investigate their employment in the compelling applications of wireless networks, including heterogeneous networks (HetNets), cognitive radios (CR), Internet of things (IoT), machine to machine networks (M2M), and so on. This article aims for assisting the readers in clarifying the motivation and methodology of the various ML algorithms, so as to invoke them for hitherto unexplored services as well as scenarios of future wireless networks.Comment: 46 pages, 22 fig

사물인터넷을 위한 무선 실내 측위 알고리즘

학위논문(박사) -- 서울대학교대학원 : 공과대학 전기·정보공학부, 2022.2. 김성철.실내 위치 기반 서비스는 스마트폰을 이용한 실내에서의 경로안내, 스마트 공장에서의 자원 관리, 실내 로봇의 자율주행 등 많은 분야에 접목될 수 있으며, 사물인터넷 응용에도 필수적인 기술이다. 다양한 위치 기반 서비스를 구현하기 위해서는 정확한 위치 정보가 필요하며, 적합한 거리 및 위치를 추정 기술이 핵심적이다. 야외에서는 위성항법시스템을 이용해서 위치 정보를 획득할 수 있다. 본 학위논문에서는 와이파이 기반 측위 기술에 대해 다룬다. 구체적으로, 전파의 신호 세기 및 도달 시간을 이용한 정밀한 실내 위치 추정을 위한 세 가지 기술에 대해 다룬다. 먼저, 비가시경로 환경에서의 거리 추정 정확도를 향상시켜 거리 기반 측위의 정확도를 향상시키는 하이브리드 알고리즘을 제안한다. 제안하 알고리즘은듀얼 밴드 대역의 신호세기를 감쇄량을 측정하여 거리 기반 측위 기법을 적용할 때, 거리 추정부 단계만을 데이터 기반 학습을 이용한 깊은 신경망 회귀 모델로 대체한 방안이다. 적절히 학습된 깊은 회귀 모델의 사용으로 비가시경로 환경에서 발생하는 거리 추정 오차를 효과적으로 감소시킬 수 있으며, 결과적으로 위치 추정 오차 또한 감소시켰다. 제안한 방법을 실내 광선추적 기반 모의실험으로 평가했을 때, 기존 기법들에 비해서 위치 추정 오차를 중간값을 기준으로 22.3% 이상 줄일 수 있음을 검증했다. 추가적으로, 제안한 방법은 실내에서의 AP 위치변화 등에 강인함을 확인했다. 다음으로, 본 논문에서는 비가시경로에서 단일 대역 수신신호세기를 측정했을 때 비가시경로가 많은 실내 환경에서 위치 추정 정확도를 높이기 위한 방안을 제안한다. 단일 대역 수신신호세기를 이용하는 방안은 기존에 이용되는 와이파이, 블루투스, 직비 등의 기반시설에 쉽게 적용될 수 있기 때문에 널리 이용된다. 하지만 신호 세기의 단일 경로손실 모델을 이용한 거리 추정은 상당한 오차를 지녀서 위치 추정 정확도를 감소시킨다. 이러한 문제의 원인은 단일 경로손실 모델로는 실내에서의 복잡한 전파 채널 특성을 반영하기 어렵기 때문이다. 본 연구에서는 실내 위치 추정을 위한 목적으로, 중첩된 다중 상태 경로 감쇄 모델을 새롭게 제시한다. 제안한 모델은 가시경로 및 비가시경로에서의 채널 특성을 고려하여 잠재적인 후보 상태들을 지닌다. 한 순간의 수신 신호 세기 측정치에 대해 각 기준 기지국별로 최적의 경로손실 모델 상태를 결정하는 효율적인 방안을 제시한다. 이를 위해 기지국별 경로손실모델 상태의 조합에 따른 측위 결과를 평가할 지표로서 비용함수를 정의하였다. 각 기지국별 최적의 채널 모델을 찾는데 필요한 계산 복잡도는 기지국 수의 증가에 따라 기하급수적으로 증가하는데, 유전 알고리즘을 이용한 탐색을 적용하여 계산량을 억제하였다. 실내 광선추적 모의실험을 통한 검증과 실측 결과를 이용한 검증을 진행하였으며, 제안한 방안은 실제 실내 환경에서 기존의 기법들에 비해 위치 추정 오차를 약 31% 감소시켰으며 평균적으로 1.92 m 수준의 정확도를 달성함을 확인했다. 마지막으로 FTM 프로토콜을 이용한 실내 위치 추적 알고리즘에 대해 연구하였다. 스마트폰의 내장 관성 센서와 와이파이 통신에서 제공하는 FTM 프로토콜을 통한 거리 추정을 이용하여 실내에서 사용자의 위치를 추적할 수 있다. 하지만 실내의 복잡한 다중경로 환경으로 인한 피크 검출 실패는 거리 측정치에 편향성을 유발한다. 또한 사용하는 디바이스의 종류에 따라 예상치 못한 거리 오차가 발생할 수있다. 본 논문에서는 실제 환경에서 FTM 거리 추정을 이용할 때 발생할 수 있는 오차들을 고려하고 이를 보상하는 방안에 대해 제시한다. 확장 칼만 필터와 결합하여 FTM 결과를 사전필터링 하여 이상값을 제거하고, 거리 측정치의 편향성을 제거하여 위치 추적 정확도를 향상시킨다. 실내에서의 실험 결과 제안한 알고리즘은 거치 측정치의 편향성을 약 44-65% 감소시켰으며 최종적으로 사용자의 위치를 서브미터급으로 추적할 수 있음을 검증했다.Indoor location-based services (LBS) can be combined with various applications such as indoor navigation for smartphone users, resource management in smart factories, and autonomous driving of robots. It is also indispensable for Internet of Things (IoT) applications. For various LBS, accurate location information is essential. Therefore, a proper ranging and positioning algorithm is important. For outdoors, the global navigation satellite system (GNSS) is available to provide position information. However, the GNSS is inappropriate indoors owing to the issue of the blocking of the signals from satellites. It is necessary to develop a technology that can replace GNSS in GNSS-denied environments. Among the various alternative systems, the one of promising technology is to use a Wi-Fi system that has already been applied to many commercial devices, and the infrastructure is in place in many regions. In this dissertation, Wi-Fi based indoor localization methods are presented. In the specific, I propose the three major issues related to accurate indoor localization using received signal strength (RSS) and fine timing measurement (FTM) protocol in the 802.11 standard for my dissertation topics. First, I propose a hybrid localization algorithm to boost the accuracy of range-based localization by improving the ranging accuracy under indoor non-line-of-sight (NLOS) conditions. I replaced the ranging part of the rule-based localization method with a deep regression model that uses data-driven learning with dual-band received signal strength (RSS). The ranging error caused by the NLOS conditions was effectively reduced by using the deep regression method. As a consequence, the positioning error could be reduced under NLOS conditions. The performance of the proposed method was verified through a ray-tracing-based simulation for indoor spaces. The proposed scheme showed a reduction in the positioning error of at least 22.3% in terms of the median root mean square error. Next, I study on positioning algorithm that considering NLOS conditions for each APs, using single band RSS measurement. The single band RSS information is widely used for indoor localization because they can be easily implemented by using existing infrastructure like Wi-Fi, Blutooth, or Zigbee. However, range estimation with a single pathloss model produces considerable errors, which degrade the positioning performance. This problem mainly arises because the single pathloss model cannot reflect diverse indoor radio wave propagation characteristics. In this study, I develop a new overlapping multi-state model to consider multiple candidates of pathloss models including line-of-sight (LOS) and NLOS states, and propose an efficient way to select a proper model for each reference node involved in the localization process. To this end, I formulate a cost function whose value varies widely depending on the choice of pathloss model of each access point. Because the computational complexity to find an optimal channel model for each reference node exponentially increases with the number of reference nodes, I apply a genetic algorithm to significantly reduce the complexity so that the proposed method can be executed in real-time. Experimental validations with ray-tracing simulations and RSS measurements at a real site confirm the improvement of localization accuracy for Wi-Fi in indoor environments. The proposed method achieves up to 1.92~m mean positioning error under a practical indoor environment and produces a performance improvement of 31.09\% over the benchmark scenario. Finally, I investigate accurate indoor tracking algorithm using FTM protocol in this dissertation. By using the FTM ranging and the built-in sensors in a smartphone, it is possible to track the user's location in indoor. However, the failure of first peak detection due to the multipath effect causes a bias in the FTM ranging results in the practical indoor environment. Additionally, the unexpected ranging error dependent on device type also degrades the indoor positioning accuracy. In this study, I considered the factors of ranging error in the FTM protocol in practical indoor environment, and proposed a method to compensate ranging error. I designed an EKF-based tracking algorithm that adaptively removes outliers from the FTM result and corrects bias to increase positioning accuracy. The experimental results verified that the proposed algorithm reduces the average ofthe ranging bias by 43-65\% in an indoor scenarios, and can achieve the sub-meter accuracy in average route mean squared error of user's position in the experiment scenarios.Abstract i Contents iv List of Tables vi List of Figures vii 1 INTRODUCTION 1 2 Hybrid Approach for Indoor Localization Using Received Signal Strength of Dual-BandWi-Fi 6 2.1 Motivation 6 2.2 Preliminary 8 2.3 System model 11 2.4 Proposed Ranging Method 13 2.5 Performance Evaluation 16 2.5.1 Ray-Tracing-Based Simulation 16 2.5.2 Analysis of the Ranging Accuracy 21 2.5.3 Analysis of the Neural Network Structure 25 2.5.4 Analysis of Positioning Accuracy 26 2.6 Summary 29 3 Genetic Algorithm for Path Loss Model Selection in Signal Strength Based Indoor Localization 31 3.1 Motivation 31 3.2 Preliminary 34 3.2.1 RSS-based Ranging Techniques 35 3.2.2 Positioning Technique 37 3.3 Proposed localization method 38 3.3.1 Localization Algorithm with Overlapped Multi-State Path Loss Model 38 3.3.2 Localization with Genetic Algorithm-Based Search 41 3.4 Performance evaluation 46 3.4.1 Numerical simulation 50 3.4.2 Experimental results 56 3.5 Summary 60 4 Indoor User Tracking with Self-calibrating Range Bias Using FTM Protocol 62 4.1 Motivation 62 4.2 Preliminary 63 4.2.1 FTM ranging 63 4.2.2 PDR-based trajectory estimation 65 4.3 EKF design for adaptive compensation of ranging bias 66 4.4 Performance evaluation 69 4.4.1 Experimental scenario 69 4.4.2 Experimental results 70 4.5 Summary 75 5 Conclusion 76 Abstract (In Korean) 89박

Wi-Fi For Indoor Device Free Passive Localization (DfPL): An Overview

The world is moving towards an interconnected and intercommunicable network of animate and inanimate objects with the emergence of Internet of Things (IoT) concept which is expected to have 50 billion connected devices by 2020. The wireless communication enabled devices play a major role in the realization of IoT. In Malaysia, home and business Internet Service Providers (ISP) bundle Wi-Fi modems working in 2.4 GHz Industrial, Scientific and Medical (ISM) radio band with their internet services. This makes Wi-Fi the most eligible protocol to serve as a local as well as internet data link for the IoT devices. Besides serving as a data link, human entity presence and location information in a multipath rich indoor environment can be harvested by monitoring and processing the changes in the Wi-Fi Radio Frequency (RF) signals. This paper comprehensively discusses the initiation and evolution of Wi-Fi based Indoor Device free Passive Localization (DfPL) since the concept was first introduced by Youssef et al. in 2007. Alongside the overview, future directions of DfPL in line with ongoing evolution of Wi-Fi based IoT devices are briefly discussed in this paper

Channel State Information from pure communication to sense and track human motion: A survey

Human motion detection and activity recognition are becoming vital for the applications in smart homes. Traditional Human Activity Recognition (HAR) mechanisms use special devices to track human motions, such as cameras (vision-based) and various types of sensors (sensor-based). These mechanisms are applied in different applications, such as home security, Human–Computer Interaction (HCI), gaming, and healthcare. However, traditional HAR methods require heavy installation, and can only work under strict conditions. Recently, wireless signals have been utilized to track human motion and HAR in indoor environments. The motion of an object in the test environment causes fluctuations and changes in the Wi-Fi signal reflections at the receiver, which result in variations in received signals. These fluctuations can be used to track object (i.e., a human) motion in indoor environments. This phenomenon can be improved and leveraged in the future to improve the internet of things (IoT) and smart home devices. The main Wi-Fi sensing methods can be broadly categorized as Received Signal Strength Indicator (RSSI), Wi-Fi radar (by using Software Defined Radio (SDR)) and Channel State Information (CSI). CSI and RSSI can be considered as device-free mechanisms because they do not require cumbersome installation, whereas the Wi-Fi radar mechanism requires special devices (i.e., Universal Software Radio Peripheral (USRP)). Recent studies demonstrate that CSI outperforms RSSI in sensing accuracy due to its stability and rich information. This paper presents a comprehensive survey of recent advances in the CSI-based sensing mechanism and illustrates the drawbacks, discusses challenges, and presents some suggestions for the future of device-free sensing technology

Ubiquitous Indoor Fine-Grained Positioning and Tracking: A Channel Response Perspective

The future of location-aided applications is shaped by the ubiquity of Internet-of-Things devices. As an increasing amount of commercial off-the-shelf radio devices support channel response collection, it is possible to achieve fine-grained position estimation at a relatively low cost. In this paper, we focus on the channel response-based positioning and tracking for various applications. We first give an overview of the state of the art (SOTA) of channel response-enabled localization, which is further classified into two categories, i.e., device-based and contact-free schemes. A taxonomy for these complementary approaches is provided concerning the involved techniques. Then, we present a micro-benchmark of channel response-based direct positioning and tracking for both device-based and contact-free schemes. Finally, some practical issues for real-world applications and future research opportunities are pointed out.Comment: 13th International Conference on Indoor Positioning and Indoor Navigatio

Survey on Wireless Indoor Positioning Systems

Indoor positioning has finally testified a rise in interest, thanks to the big selection of services it is provided, and ubiquitous connectivity. There are currently many systems that can locate a person, be it wireless or by mobile phone and the most common systems in outdoor environments is the GPS, the most common in indoor environments is Wi-Fi positioning technique positioning. The improvement of positioning systems in indoor environments is desirable in many areas as it provides important facilities and services, such as airports, universities, factories, hospitals, and shopping malls. This paper provides an overview of the existing methods based on wireless indoor positioning technique. We focus in this survey on the strengths of these systems mentioned in the literature discordant with the present surveys; we also assess to additionally measure various systems from the scene of energy efficiency, price, and following accuracy instead of comparing the technologies, we also to additionally discuss residual challenges to correct indoor positioning