Vehicle routing and scheduling – The traveling salesman problem

The classification of routing and scheduling problems depends on certain characteristics of the service delivery system, such as size of the delivery fleet, where the fleet is housed, capacities of the vehicles, and routing and scheduling objectives. In the simplest case, we begin with a set of nodes to be visited by a single vehicle. The nodes may be visited in any order, there are no precedence relationships, the travel costs between two nodes are the same regardless of the direction traveled, and there are no delivery-time restrictions. In addition, vehicle capacity is not considered. The output for the single-vehicle problem is a route or a tour where each node is visited only once and the route begins and ends at the depot node. The tour is formed with the goal of minimizing the total tour cost. This simplest case is referred to as a traveling salesman problem (TSP). An extension of the traveling salesman problem, referred to as the multiple traveling salesman problems (MTSP), occurs when a fleet of vehicles must be routed from a single depot. The goal is to generate a set of routes, one for each vehicle in the fleet. The characteristics of this problem are that a node may be assigned to only one vehicle, but a vehicle will have more than one node assigned to it. There are no restrictions on the size of the load or number of passengers a vehicle may carry. The solution to this problem will give the order in which each vehicle is to visit its assigned nodes. As in the single-vehicle case, the objective is to develop the set of minimum-cost routes, where “cost” may be represented by a dollar amount, distance, or travel time. If we now restrict the capacity of the multiple vehicles and couple with it the possibility of having varying demands at each node, the problem is classified as a vehicle routing problem (VRP). In this paper will be presenteds the TSP procedure for delivery and routing of new product L-carnitine from Koding – Skopje which life development is in the introduction or development phase

Path planning, modelling and simulation for energy optimised mobile robotics

This thesis is concerned with an investigation of a solution for mobile robotic platforms to minimize the usage of scarce energy that is available and is not wasted following traditionally planned paths for complex terrain environments. This therefore addresses the need to reduce the total energy cost during a field task or mission. A path planning algorithm is designed by creating a new approach of artificial potential field method that generates a planned path, utilising terrain map. The new approach has the capability of avoiding the local minimum problems which is one of the major problems of traditional potential field method. By solving such problems gives a reliable solution to establish a required path. Therefore the approach results in an energy efficient path of the terrain identified, instead obvious straight line of the terrain. A literature review is conducted which reviews the mainstream path planning algorithms with the applications in mobile robotic platforms was analysed. These path planning algorithms are compared for the purpose of energy optimized planning, which concludes the method of artificial potential field as the path planning algorithm which has the most potential and will be further investigated and improved in this research. The methodology of designing, modelling and simulating a mobile robotic platform is defined and presented for the purpose of energy optimized path planning requirement. The research is to clarify the needs, requirements, and specifications of the design. A complete set of models which include mechanical and electrical modelling, functional concept modelling, modelling of the system are established. Based on these models, an energy optimized path planning algorithm is designed. The modelling of force and the kinematics is established to validate and evaluate the result of the algorithm through simulations. Moreover a simulation environment is established which is constructed for multi perspective simulation. This also enables collaborative simulation using Simulink and ADAMS to for simulating a path generated by the path planning algorithm and assess the energy consumption of the driven and steering mechanism of an exemplar system called AgriRover. This simulation environment allows the capture of simulated result of the total energy consumption, therefore outlines the energy cost behaviour of the AgriRover. A total of two sets of paths was tested in the fields for validation, one being generated by the energy optimized path planning algorithm and the other following a straight path. During the field tests the total cost of energy was captured . Two sets of results are compared with each other and compared with the simulation. The comparison shows a 21.34% of the energy saving by deploying the path generated with the energy optimized path planning algorithm in the field test. This research made the following contribution to knowledge. A comparison and grading of mainstream path planning algorithms from energy optimisation perspective is undertaken using detailed evaluation criteria, including computational power required, extendibility, flexibility and more criteria that is relevant for the energy optimized planning purpose. These algorithms have not been compared from energy optimisation angle before, and the research for energy optimised planning under complex terrain environments have not been investigated. Addressing these knowledge gaps, a methodology of designing, modelling and simulating a mobile platform system is proposed to facilitate an energy optimized path planning. This , leads to a new approach of path planning algorithm that reduces unnecessary energy spend for climbing of the terrain, using the terrain data available. Such a methodology derives several novel methods: Namely, a method for avoiding local minimum problem for artificial potential field path planning using the approach of approximation; A method of achieving high expendability of the path planning algorithm, where this method is capable of generate a path through a large map in a short time; A novel method of multi perspective dynamic simulation, which is capable of simulating the behaviour of internal mechanism and the overall robotic mobile platform with the fully integrated control, The dynamic simulation enables prediction of energy consumption; Finally, a novel method of mathematically modelling and simplifying a steering mechanism for the wheel based mobile vehicle was further investigated.This thesis is concerned with an investigation of a solution for mobile robotic platforms to minimize the usage of scarce energy that is available and is not wasted following traditionally planned paths for complex terrain environments. This therefore addresses the need to reduce the total energy cost during a field task or mission. A path planning algorithm is designed by creating a new approach of artificial potential field method that generates a planned path, utilising terrain map. The new approach has the capability of avoiding the local minimum problems which is one of the major problems of traditional potential field method. By solving such problems gives a reliable solution to establish a required path. Therefore the approach results in an energy efficient path of the terrain identified, instead obvious straight line of the terrain. A literature review is conducted which reviews the mainstream path planning algorithms with the applications in mobile robotic platforms was analysed. These path planning algorithms are compared for the purpose of energy optimized planning, which concludes the method of artificial potential field as the path planning algorithm which has the most potential and will be further investigated and improved in this research. The methodology of designing, modelling and simulating a mobile robotic platform is defined and presented for the purpose of energy optimized path planning requirement. The research is to clarify the needs, requirements, and specifications of the design. A complete set of models which include mechanical and electrical modelling, functional concept modelling, modelling of the system are established. Based on these models, an energy optimized path planning algorithm is designed. The modelling of force and the kinematics is established to validate and evaluate the result of the algorithm through simulations. Moreover a simulation environment is established which is constructed for multi perspective simulation. This also enables collaborative simulation using Simulink and ADAMS to for simulating a path generated by the path planning algorithm and assess the energy consumption of the driven and steering mechanism of an exemplar system called AgriRover. This simulation environment allows the capture of simulated result of the total energy consumption, therefore outlines the energy cost behaviour of the AgriRover. A total of two sets of paths was tested in the fields for validation, one being generated by the energy optimized path planning algorithm and the other following a straight path. During the field tests the total cost of energy was captured . Two sets of results are compared with each other and compared with the simulation. The comparison shows a 21.34% of the energy saving by deploying the path generated with the energy optimized path planning algorithm in the field test. This research made the following contribution to knowledge. A comparison and grading of mainstream path planning algorithms from energy optimisation perspective is undertaken using detailed evaluation criteria, including computational power required, extendibility, flexibility and more criteria that is relevant for the energy optimized planning purpose. These algorithms have not been compared from energy optimisation angle before, and the research for energy optimised planning under complex terrain environments have not been investigated. Addressing these knowledge gaps, a methodology of designing, modelling and simulating a mobile platform system is proposed to facilitate an energy optimized path planning. This , leads to a new approach of path planning algorithm that reduces unnecessary energy spend for climbing of the terrain, using the terrain data available. Such a methodology derives several novel methods: Namely, a method for avoiding local minimum problem for artificial potential field path planning using the approach of approximation; A method of achieving high expendability of the path planning algorithm, where this method is capable of generate a path through a large map in a short time; A novel method of multi perspective dynamic simulation, which is capable of simulating the behaviour of internal mechanism and the overall robotic mobile platform with the fully integrated control, The dynamic simulation enables prediction of energy consumption; Finally, a novel method of mathematically modelling and simplifying a steering mechanism for the wheel based mobile vehicle was further investigated

State of the art of audio- and video based solutions for AAL

Working Group 3. Audio- and Video-based AAL ApplicationsIt is a matter of fact that Europe is facing more and more crucial challenges regarding health and social care due to the demographic change and the current economic context. The recent COVID-19 pandemic has stressed this situation even further, thus highlighting the need for taking action. Active and Assisted Living (AAL) technologies come as a viable approach to help facing these challenges, thanks to the high potential they have in enabling remote care and support. Broadly speaking, AAL can be referred to as the use of innovative and advanced Information and Communication Technologies to create supportive, inclusive and empowering applications and environments that enable older, impaired or frail people to live independently and stay active longer in society. AAL capitalizes on the growing pervasiveness and effectiveness of sensing and computing facilities to supply the persons in need with smart assistance, by responding to their necessities of autonomy, independence, comfort, security and safety. The application scenarios addressed by AAL are complex, due to the inherent heterogeneity of the end-user population, their living arrangements, and their physical conditions or impairment. Despite aiming at diverse goals, AAL systems should share some common characteristics. They are designed to provide support in daily life in an invisible, unobtrusive and user-friendly manner. Moreover, they are conceived to be intelligent, to be able to learn and adapt to the requirements and requests of the assisted people, and to synchronise with their specific needs. Nevertheless, to ensure the uptake of AAL in society, potential users must be willing to use AAL applications and to integrate them in their daily environments and lives. In this respect, video- and audio-based AAL applications have several advantages, in terms of unobtrusiveness and information richness. Indeed, cameras and microphones are far less obtrusive with respect to the hindrance other wearable sensors may cause to one’s activities. In addition, a single camera placed in a room can record most of the activities performed in the room, thus replacing many other non-visual sensors. Currently, video-based applications are effective in recognising and monitoring the activities, the movements, and the overall conditions of the assisted individuals as well as to assess their vital parameters (e.g., heart rate, respiratory rate). Similarly, audio sensors have the potential to become one of the most important modalities for interaction with AAL systems, as they can have a large range of sensing, do not require physical presence at a particular location and are physically intangible. Moreover, relevant information about individuals’ activities and health status can derive from processing audio signals (e.g., speech recordings). Nevertheless, as the other side of the coin, cameras and microphones are often perceived as the most intrusive technologies from the viewpoint of the privacy of the monitored individuals. This is due to the richness of the information these technologies convey and the intimate setting where they may be deployed. Solutions able to ensure privacy preservation by context and by design, as well as to ensure high legal and ethical standards are in high demand. After the review of the current state of play and the discussion in GoodBrother, we may claim that the first solutions in this direction are starting to appear in the literature. A multidisciplinary 4 debate among experts and stakeholders is paving the way towards AAL ensuring ergonomics, usability, acceptance and privacy preservation. The DIANA, PAAL, and VisuAAL projects are examples of this fresh approach. This report provides the reader with a review of the most recent advances in audio- and video-based monitoring technologies for AAL. It has been drafted as a collective effort of WG3 to supply an introduction to AAL, its evolution over time and its main functional and technological underpinnings. In this respect, the report contributes to the field with the outline of a new generation of ethical-aware AAL technologies and a proposal for a novel comprehensive taxonomy of AAL systems and applications. Moreover, the report allows non-technical readers to gather an overview of the main components of an AAL system and how these function and interact with the end-users. The report illustrates the state of the art of the most successful AAL applications and functions based on audio and video data, namely (i) lifelogging and self-monitoring, (ii) remote monitoring of vital signs, (iii) emotional state recognition, (iv) food intake monitoring, activity and behaviour recognition, (v) activity and personal assistance, (vi) gesture recognition, (vii) fall detection and prevention, (viii) mobility assessment and frailty recognition, and (ix) cognitive and motor rehabilitation. For these application scenarios, the report illustrates the state of play in terms of scientific advances, available products and research project. The open challenges are also highlighted. The report ends with an overview of the challenges, the hindrances and the opportunities posed by the uptake in real world settings of AAL technologies. In this respect, the report illustrates the current procedural and technological approaches to cope with acceptability, usability and trust in the AAL technology, by surveying strategies and approaches to co-design, to privacy preservation in video and audio data, to transparency and explainability in data processing, and to data transmission and communication. User acceptance and ethical considerations are also debated. Finally, the potentials coming from the silver economy are overviewed.publishedVersio

Proceedings of the ECCOMAS Thematic Conference on Multibody Dynamics 2015

This volume contains the full papers accepted for presentation at the ECCOMAS Thematic Conference on Multibody Dynamics 2015 held in the Barcelona School of Industrial Engineering, Universitat Politècnica de Catalunya, on June 29 - July 2, 2015. The ECCOMAS Thematic Conference on Multibody Dynamics is an international meeting held once every two years in a European country. Continuing the very successful series of past conferences that have been organized in Lisbon (2003), Madrid (2005), Milan (2007), Warsaw (2009), Brussels (2011) and Zagreb (2013); this edition will once again serve as a meeting point for the international researchers, scientists and experts from academia, research laboratories and industry working in the area of multibody dynamics. Applications are related to many fields of contemporary engineering, such as vehicle and railway systems, aeronautical and space vehicles, robotic manipulators, mechatronic and autonomous systems, smart structures, biomechanical systems and nanotechnologies. The topics of the conference include, but are not restricted to: ● Formulations and Numerical Methods ● Efficient Methods and Real-Time Applications ● Flexible Multibody Dynamics ● Contact Dynamics and Constraints ● Multiphysics and Coupled Problems ● Control and Optimization ● Software Development and Computer Technology ● Aerospace and Maritime Applications ● Biomechanics ● Railroad Vehicle Dynamics ● Road Vehicle Dynamics ● Robotics ● Benchmark ProblemsPostprint (published version

Factories of the Future

Engineering; Industrial engineering; Production engineerin

Actuators for Intelligent Electric Vehicles

This book details the advanced actuators for IEVs and the control algorithm design. In the actuator design, the configuration four-wheel independent drive/steering electric vehicles is reviewed. An in-wheel two-speed AMT with selectable one-way clutch is designed for IEV. Considering uncertainties, the optimization design for the planetary gear train of IEV is conducted. An electric power steering system is designed for IEV. In addition, advanced control algorithms are proposed in favour of active safety improvement. A supervision mechanism is applied to the segment drift control of autonomous driving. Double super-resolution network is used to design the intelligent driving algorithm. Torque distribution control technology and four-wheel steering technology are utilized for path tracking and adaptive cruise control. To advance the control accuracy, advanced estimation algorithms are studied in this book. The tyre-road peak friction coefficient under full slip rate range is identified based on the normalized tyre model. The pressure of the electro-hydraulic brake system is estimated based on signal fusion. Besides, a multi-semantic driver behaviour recognition model of autonomous vehicles is designed using confidence fusion mechanism. Moreover, a mono-vision based lateral localization system of low-cost autonomous vehicles is proposed with deep learning curb detection. To sum up, the discussed advanced actuators, control and estimation algorithms are beneficial to the active safety improvement of IEVs

Virtual Reality

At present, the virtual reality has impact on information organization and management and even changes design principle of information systems, which will make it adapt to application requirements. The book aims to provide a broader perspective of virtual reality on development and application. First part of the book is named as "virtual reality visualization and vision" and includes new developments in virtual reality visualization of 3D scenarios, virtual reality and vision, high fidelity immersive virtual reality included tracking, rendering and display subsystems. The second part named as "virtual reality in robot technology" brings forth applications of virtual reality in remote rehabilitation robot-based rehabilitation evaluation method and multi-legged robot adaptive walking in unstructured terrains. The third part, named as "industrial and construction applications" is about the product design, space industry, building information modeling, construction and maintenance by virtual reality, and so on. And the last part, which is named as "culture and life of human" describes applications of culture life and multimedia-technology

Factories of the Future

Engineering; Industrial engineering; Production engineerin