A CAD Based Dynamic analysis approach to AK prosthesis design

Paper introduces dynamic simulation approach based on computer aided design (CAD), which was applied for development of a passive above-knee (AK) prosthesis to enable a one leg amputated patient with a reasonable size of stump. A locally-fabricated prosthetic knee was modified to develop a pneumatic damper-controlled AK prosthesis. Design studies were carried out to find center of gravity and moment of inertia of the assembly. CAD dynamic analysis was conducted on ProE software and the results were compared to actual swing time found experimentally in the lab. The leg was tested for validation on subjects with positive result

Conceptual design of an energy efficient transfemoral prosthesis

In this study, we present the conceptual design of a fully-passive transfemoral prosthesis. The design is inspired by the power flow in human gait in order to have an energy efficient device. The working principle of the conceptual mechanism is based on three storage elements, which are responsible of the energetic coupling between the knee and the ankle joints. Design parameters of the prosthesis have been determined according to the energy absorption intervals of the human gait. Simulation results shows that the power flow of the system is comparable with human data. Finally, an initial prototype is presented as proof of concept

Dynamic Modeling, Parameter Estimation and Control of a Leg Prosthesis Test Robot

Robotic testing can facilitate the development of new concepts, designs and control systems for prosthetic limbs. Human subject test clearances, safety and the lack of repeatability associated with human trials can be reduced or eliminated with automated testing, and test modalities are possible which are dangerous or inconvenient to attempt with patients. This paper describes the development, modeling, parameter estimation and control of a robot capable of reproducing two degree-of-freedom hip motion in the sagittal plane. Hip vertical displacement and thigh angle motion profiles are applied to a transfemoral prosthesis attached to the robot. A treadmill is used as walking surface. Aside from tracking hip motion trajectories, the control system can be used to regulate the contact force between the treadmill and the prosthesis. The paper summarizes the overall development process, with emphasis on the generation of a dynamic model that can be used to design closed-loop motion and force control algorithms

Conceptual Design of a Fully Passive Transfemoral Prosthesis to Facilitate Energy-Efficient Gait

In this study, we present the working principle and conceptual design towards the realization of a fully-passive transfemoral prosthesis that mimics the energetics of the natural human gait. The fundamental property of the conceptual design consists of realizing an energetic coupling between the knee and ankle joints of the mechanism. Simulation results show that the power flow of the working principle is comparable to that in human gait and a considerable amount of energy is delivered to the ankle joint for the push-off generation. An initial prototype in half scale is realized to validate the working principle. The construction of the prototype is explained together with the test setup that has been built for the evaluation. Finally, experimental results of the prosthesis prototype during walking on a treadmill show the validity of the working principle

Research on the Nonlinear Computer Torque control of the MR Damper Based Above-knee Prosthesis

Aiming at the motion track controlling of the semi-active magnetorheological damper based above-knee prosthesis (MRAKP), according to the LaSalle’s invariant set theorem, a kind of nonlinear compute torque (NCT) control law for the track controlling of the AKMR, is proposed to promote the robustness and performance of the intelligent above-knee prosthesis. The proposed NCT controller includes the feedforward control and the feedback control. The former one is used to compensate the nonlinear terms in the dynamic model of the MRAKP, such as the Coriolis force, the centripetal force, and the gravity. The feedback control, utilizing a nonlinear PD controller, adaptively adjusts the control gain coefficients and reduces the system error. On these bases, numerical simulations on the MRAKPare carried out to analyze the performance of the proposed NCT controller in ADAMS and simulink. For comparing, the track controlling performance of the PD controller and the CT+PD controller are also presented in the paper. Simulation results indicate that the proposed NCT controller for the MRAKP is able to adaptively adjust the control gain coefficients with lower track error and higher robustness than the conventional PD controller and the CT+PD controller

University of Malaya Research Bulletin, Volume 16, Number 1, 2016

Previously known as IPPP UM Research Bulleti

Biomimetic agonist-antagonist active knee prosthesis

Thesis (Ph. D.)--Massachusetts Institute of Technology, School of Architecture and Planning, Program in Media Arts and Sciences, 2012.Cataloged from PDF version of thesis.Includes bibliographical references (p. 92-96).The loss of a limb is extremely debilitating. Unfortunately, today's assistive technologies are still far from providing fully functional artificial limb replacements. Although lower extremity prostheses are currently better able to give assistance than their upper-extremity counterparts, important locomotion problems still remain for leg amputees. Instability, gait asymmetry, decreased walking speeds and high metabolic energy costs are some of the main challenges requiring the development of a new kind of prosthetic device. These challenges point to the need for highly versatile, fully integrated lower-extremity powered prostheses that can replicate the biological behavior of the intact human leg. This thesis presents the design and evaluation of a novel biomimetic active knee prosthesis capable of emulating intact knee biomechanics during level-ground walking. The knee design is motivated by a mono-articular prosthetic knee model comprised of a variable damper and two series elastic clutch units spanning the knee joint. The powered knee system is comprised of two series-elastic actuators positioned in parallel in an agonist-antagonist configuration. This investigation hypothesizes that the biomimetic active-knee prosthesis, with a variable impedance control, can improve unilateral transfemoral amputee locomotion in level-ground walking, reducing the metabolic cost of walking at selfselected speeds. To evaluate this hypothesis, a preliminary study investigated the clinical impact of the active knee prosthesis on the metabolic cost of walking of four unilateral above-knee amputees. This preliminary study compared the antagonistic active knee prosthesis with subjects' prescribed knee prostheses. The subjects' prescribed prostheses encompass four of the leading prosthetic knee technologies commercially available, including passive and electronically controlled variable-damping prosthetic systems. Use of the novel biomimetic active knee prosthesis resulted in a metabolic cost reduction for all four subjects by an average of 5.8%. Kinematic and kinetic analyses indicate that the active knee can increase self-selected walking speed in addition to reducing upper body vertical displacement during walking by an average of 16%. The results of this investigation report for the first time a metabolic cost reduction when walking with a prosthetic system comprised of an electrically powered active knee and passive foot-ankle prostheses, as compared to walking with a conventional transfemoral prosthesis. With this work I aim to advance the field of biomechatronics, contributing to the development of integral assistive technologies that adapt to the needs of the physically challenged.by Ernesto Carlos Martinez-Villalpando.Ph.D

Design, Modeling, and Control of an Active Prosthetic Knee

The few microcontroller based active/semi-active prosthetic knee joints available commercially are extremely expensive and do not consider the uncertainties of inputs sensory information. Progressing in the controller of the current prosthetic devices and creating artificial lower limbs compatible with different users may lead to more effective and low-cost prostheses. This can affect the life style of lots of amputees specially the land-mine victims in developing war-torn countries who are unable to partake in the advancement of the current intelligent prosthetic knees. The purpose of the proposed Active Prosthetic Knee (APK) design is to investigate a new schema that allows the device to provide the full necessary torque at the knee joint based on echoing the state of the intact leg. This study involves the design features of the mechanical aspects, sensing system, communication, and knowledge-based controller to implement a cost-effective APK. The proposed microcontroller based prosthesis utilizes a ball screw system accompanied by a high-speed brushed servomotor to provide one degree of freedom for the fabricated prototype. Moreover, a modular test-bed is manufactured to mimic the lower limb motion which contributes investigating different controllers for the prototype. Thus, the test bed allows assessing the primary performance of the APK before testing on a human subject. Different types of sensing systems (electromyography and lower limb inclination angles) are investigated to extract signals from the user’s healthy leg and send the captured data to the APK controller. The methodology to measure each type of signal is described, and comparison analyses are provided. Wireless communication between the sensory part and actuator is established. A knowledge-based control mechanism is developed that takes advantage of an Adaptive-Network-based Fuzzy Inference System (ANFIS) to determine knee torque as a function of the echoing angular state of the able leg considering the uncertainty of inputs. Therefore, the developed controller can make the APK serviceable for different users. The fuzzy membership function’s parameters and rules define the knowledge-base of the system. This knowledge is based on existing experience and known facts about the walking cycle