27,450 research outputs found
SIRU development. Volume 1: System development
A complete description of the development and initial evaluation of the Strapdown Inertial Reference Unit (SIRU) system is reported. System development documents the system mechanization with the analytic formulation for fault detection and isolation processing structure; the hardware redundancy design and the individual modularity features; the computational structure and facilities; and the initial subsystem evaluation results
Electronic/electric technology benefits study
The benefits and payoffs of advanced electronic/electric technologies were investigated for three types of aircraft. The technologies, evaluated in each of the three airplanes, included advanced flight controls, advanced secondary power, advanced avionic complements, new cockpit displays, and advanced air traffic control techniques. For the advanced flight controls, the near term considered relaxed static stability (RSS) with mechanical backup. The far term considered an advanced fly by wire system for a longitudinally unstable airplane. In the case of the secondary power systems, trades were made in two steps: in the near term, engine bleed was eliminated; in the far term bleed air, air plus hydraulics were eliminated. Using three commercial aircraft, in the 150, 350, and 700 passenger range, the technology value and pay-offs were quantified, with emphasis on the fiscal benefits. Weight reductions deriving from fuel saving and other system improvements were identified and the weight savings were cycled for their impact on TOGW (takeoff gross weight) and upon the performance of the airframes/engines. Maintenance, reliability, and logistic support were the other criteria
Modeling and analysis of power processing systems: Feasibility investigation and formulation of a methodology
A review is given of future power processing systems planned for the next 20 years, and the state-of-the-art of power processing design modeling and analysis techniques used to optimize power processing systems. A methodology of modeling and analysis of power processing equipment and systems has been formulated to fulfill future tradeoff studies and optimization requirements. Computer techniques were applied to simulate power processor performance and to optimize the design of power processing equipment. A program plan to systematically develop and apply the tools for power processing systems modeling and analysis is presented so that meaningful results can be obtained each year to aid the power processing system engineer and power processing equipment circuit designers in their conceptual and detail design and analysis tasks
Systems study for an Integrated Digital-Electric Aircraft (IDEA)
The results of the Integrated Digital/Electric Aircraft (IDEA) Study are presented. Airplanes with advanced systems were, defined and evaluated, as a means of identifying potential high payoff research tasks. A baseline airplane was defined for comparison, typical of a 1990's airplane with advanced active controls, propulsion, aerodynamics, and structures technology. Trade studies led to definition of an IDEA airplane, with extensive digital systems and electric secondary power distribution. This airplane showed an improvement of 3% in fuel use and 1.8% in DOC relative to the baseline configuration. An alternate configuration, an advanced technology turboprop, was also evaluated, with greater improvement supported by digital electric systems. Recommended research programs were defined for high risk, high payoff areas appropriate for implementation under NASA leadership
Functional Verification of Power Electronic Systems
This project is the final work of the degree in Industrial Electronics and
Automatic Engineering. It has global concepts of electronics but it focuses
in power electronic systems.
There is a need for reliable testing systems to ensure the good functionality of power electronic systems. The constant evolution of this products
requires the development of new testing techniques. This project aims to develop a new testing system to accomplish the functional verification of a new
power electronic system manufactured on a company that is in the power
electronic sector . This test system consists on two test bed platforms, one
to test the control part of the systems and the other one to test their functionality. A software to perform the test is also designed. Finally, the testing
protocol is presented.
This design is validated and then implemented on a buck converter and
an inverter that are manufactured at the company. The results show that
the test system is reliable and is capable of testing the functional verification
of the two power electronic system successfully.
In summary, this design can be introduced in the power electronic production process to test the two products ensuring their reliability in the
market
The MEG detector for decay search
The MEG (Mu to Electron Gamma) experiment has been running at the Paul
Scherrer Institut (PSI), Switzerland since 2008 to search for the decay \meg\
by using one of the most intense continuous beams in the world. This
paper presents the MEG components: the positron spectrometer, including a thin
target, a superconducting magnet, a set of drift chambers for measuring the
muon decay vertex and the positron momentum, a timing counter for measuring the
positron time, and a liquid xenon detector for measuring the photon energy,
position and time. The trigger system, the read-out electronics and the data
acquisition system are also presented in detail. The paper is completed with a
description of the equipment and techniques developed for the calibration in
time and energy and the simulation of the whole apparatus.Comment: 59 pages, 90 figure
Apollo experience report guidance and control systems: Primary guidance, navigation, and control system development
The primary guidance, navigation, and control systems for both the lunar module and the command module are described. Development of the Apollo primary guidance systems is traced from adaptation of the Polaris Mark II system through evolution from Block I to Block II configurations; the discussion includes design concepts used, test and qualification programs performed, and major problems encountered. The major subsystems (inertial, computer, and optical) are covered. Separate sections on the inertial components (gyroscopes and accelerometers) are presented because these components represent a major contribution to the success of the primary guidance, navigation, and control system
Third Conference on Artificial Intelligence for Space Applications, part 2
Topics relative to the application of artificial intelligence to space operations are discussed. New technologies for space station automation, design data capture, computer vision, neural nets, automatic programming, and real time applications are discussed
An assessment of advanced displays and controls technology applicable to future space transportation systems
The topic of advanced display and control technology is addressed along with the major objectives of this technology, the current state of the art, major accomplishments, research programs and facilities, future trends, technology issues, space transportation systems applications and projected technology readiness for those applications. The holes that may exist between the technology needs of the transportation systems versus the research that is currently under way are addressed, and cultural changes that might facilitate the incorporation of these advanced technologies into future space transportation systems are recommended. Some of the objectives are to reduce life cycle costs, improve reliability and fault tolerance, use of standards for the incorporation of advancing technology, and reduction of weight, volume and power. Pilot workload can be reduced and the pilot's situational awareness can be improved, which would result in improved flight safety and operating efficiency. This could be accomplished through the use of integrated, electronic pictorial displays, consolidated controls, artificial intelligence, and human centered automation tools. The Orbiter Glass Cockpit Display is an example examined
- …