Design and development of a hominid robot with local control in its adaptable feet to enhance locomotion capabilities

With increasing mechanization of our daily lives, the expectations and demands in robotic systems increase in the general public and in scientists alike. In recent events such as the Deepwater Horizon''-accident or the nuclear disaster at Fukushima, mobile robotic systems were used, e.g., to support local task forces by gaining visual material to allow an analysis of the situation. Especially the Fukushima example shows that the robotic systems not only have to face a variety of different tasks during operation but also have to deal with different demands regarding the robot's mobility characteristics. To be able to cope with future requirements, it seems necessary to develop kinematically complex systems that feature several different operating modes. That is where this thesis comes in: A robotic system is developed, whose morphology is oriented on chimpanzees and which has the possibility due to its electro-mechanical structure and the degrees of freedom in its arms and legs to walk with different gaits in different postures. For the proposed robot, the chimpanzee was chosen as a model, since these animals show a multitude of different gaits in nature. A quadrupedal gait like crawl allows the robot to traverse safely and stable over rough terrain. A change into the humanoid, bipedal posture enables the robot to move in man-made environments. The structures, which are necessary to ensure an effective and stable locomotion in these two poses, e.g., the feet, are presented in more detail within the thesis. This includes the biological model and an abstraction to allow a technical implementation. In addition, biological spines are analyzed and the development of an active, artificial spine for the robotic system is described. These additional degrees of freedom can increase the robot's locomotion and manipulation capabilities and even allow to show movements, which are not possible without a spine. Unfortunately, the benefits of using an artificial spine in robotic systems are nowadays still neglected, due to the increased complexity of system design and control. To be able to control such a kinematically complex system, a multitude of sensors is installed within the robot's structures. By placing evaluation electronics close by, a local and decentralized preprocessing is realized. Due to this preprocessing is it possible to realize behaviors on the lowest level of robot control: in this thesis it is exemplarily demonstrated by a local controller in the robot's lower leg. In addition to the development and evaluation of robot's structures, the functionality of the overall system is analyzed in different environments. This includes the presentation of detailed data to show the advantages and disadvantages of the local controller. The robot can change its posture independently from a quadrupedal into a bipedal stance and the other way around without external assistance. Once the robot stands upright, it is to investigate to what extent the quadrupedal walking pattern and control structures (like the local controller) have to be modified to contribute to the bipedal walking as well

Design Principles for FES Concept Development

© Cranfield University 2013. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright owner.A variety of pathologies can cause injury to the spinal cord and hinder movement. A range of equipment is available to help spinal injury sufferers move their affected limbs. One method of rehabilitation is functional electrical stimulation (FES). FES is a technique where small electrical currents are applied to the surface of the user’s legs to stimulate the muscles. Studies have demonstrated the benefits of using this method and it has also been incorporated into a number of devices. The aim of the project was to produce a number of designs for a new device that uses FES technology. The project was completed in conjunction with an industrial partner. A review of the literature and consultation with industrial experts suggested a number of ways current devices could be improved. These included encouraging the user to lean forwards while walking and powering the device using a more ergonomic method. A group of designers were used to produce designs that allowed the user to walk with a more natural gait and avoided cumbersome power packs. The most effective of these designs were combined to form one design that solved both problems. A 3-dimensional model of this design was simulated using computer-aided design software. Groups of engineers, scientists and consumers were also invited to provide input on how a new device should function. Each of these groups provided a design that reflected their specific needs, depending on their experience with similar technology. Low level prototypes were produced of these designs. A group of designers were also used to design concepts for a functional electrical stimulation device based on an introduction given by industry experts. Each of the designs was presented to experienced professionals to obtain feedback. A set of guidelines were also produced during the project that instructed how to create the designs

Development and Evaluation of AI-based Parkinson's Disease Related Motor Symptom Detection Algorithms

Parkinson's Disease (PD) is a chronic, progressive, neurodegenerative disorder that is typically characterized by a loss of (motor) function, increased slowness and rigidity. Due to a lack of feasible biomarkers, progression cannot easily be quantified with objective measures. For the same reason, neurologists have to revert to monitoring of (motor) symptoms (i.e. by means of subjective and often inaccurate patient diaries) in order to evaluate a medication's effectiveness. Replacing or supplementing these diaries with an automatic and objective assessment of symptoms and side effects could drastically reduce manual efforts and potentially help in personalizing and improving medication regime. In turn, appearance of symptoms could be reduced and the patient's quality of life increased. The objective of this thesis is two-fold: (1) development and improvement of algorithms for detecting PD related motor symptoms and (2) to develop a software framework for time series analysis

Use of stance control knee-ankle-foot orthoses : a review of the literature

The use of stance control orthotic knee joints are becoming increasingly popular as unlike locked knee-ankle-foot orthoses, these joints allow the limb to swing freely in swing phase while providing stance phase stability, thus aiming to promote a more physiological and energy efficient gait. It is of paramount importance that all aspects of this technology is monitored and evaluated as the demand for evidence based practice and cost effective rehabilitation increases. A robust and thorough literature review was conducted to retrieve all articles which evaluated the use of stance control orthotic knee joints. All relevant databases were searched, including The Knowledge Network, ProQuest, Web of Knowledge, RECAL Legacy, PubMed and Engineering Village. Papers were selected for review if they addressed the use and effectiveness of commercially available stance control orthotic knee joints and included participant(s) trialling the SCKAFO. A total of 11 publications were reviewed and the following questions were developed and answered according to the best available evidence: 1. The effect SCKAFO (stance control knee-ankle-foot orthoses) systems have on kinetic and kinematic gait parameters 2. The effect SCKAFO systems have on the temporal and spatial parameters of gait 3. The effect SCKAFO systems have on the cardiopulmonary and metabolic cost of walking. 4. The effect SCKAFO systems have on muscle power/generation 5. Patient’s perceptions/ compliance of SCKAFO systems Although current research is limited and lacks in methodological quality the evidence available does, on a whole, indicate a positive benefit in the use of SCKAFOs. This is with respect to increased knee flexion during swing phase resulting in sufficient ground clearance, decreased compensatory movements to facilitate swing phase clearance and improved temporal and spatial gait parameters. With the right methodological approach, the benefits of using a SCKAFO system can be evidenced and the research more effectively converted into clinical practice

The effect of prefabricated wrist-hand orthoses on performing activities of daily living

Wrist-hand orthoses (WHOs) are commonly prescribed to manage the functional deficit associated with the wrist as a result of rheumatoid changes. The common presentation of the wrist is one of flexion and radial deviation with ulnar deviation of the fingers. This wrist position Results in altered biomechanics compromising hand function during activities of daily living (ADL). A paucity of evidence exists which suggests that improvements in ADL with WHO use are very task specific. Using normal subjects, and thus in the absence of pain as a limiting factor, the impact of ten WHOs on performing five ADLs tasks was investigated. The tasks were selected to represent common grip patterns and tests were performed with and without WHOs by right-handed, females, aged 20-50 years over a ten week period. The time taken to complete each task was recorded and a wrist goniometer, elbow goniometer and a forearm torsiometer were used to measure joint motion. Results show that, although orthoses may restrict the motion required to perform a task, participants do not use the full range of motion which the orthoses permit. The altered wrist position measured may be attributable to a modified method of performing the task or to a necessary change in grip pattern, resulting in an increased time in task performance. The effect of WHO use on ADL is task specific and may initially impede function. This could have an effect on WHO compliance if there appears to be no immediate benefits. This orthotic effect may be related to restriction of wrist motion or an inability to achieve the necessary grip patterns due to the designs of the orthoses

Pushing the Boundaries of Consciousness and Cognition

This thesis synthesises material from contemporary cognitive science, analytic philosophy of mind continental phenomenology to defend a view of the mind as embodied and extended. The first three chapters focus primarily on embodiment, while the last two chapters focus more on factors external to the body. In chapter I, I introduce Merleau-Ponty's concept of the body schema and argue that we should resist reducing the body schema to an internal representation of the body, and also that it does not always coincide with the boundaries of the biological body. In chapter II, I explicate and defend the sensorimotor approach to visual perception, further invoking Merleau-Ponty's phenomenology to support the arguments therein and to address certain worries internal to the sensorimotor approach. Chapter III builds on the conclusions of chapters I and II to explore one way in which technological extensions of the body can lead to novel perceptual experiences, and tentatively suggests a limited sense in which these experience may still be said to be visual in character. In chapter IV, I move beyond the body to explicate and defend the extended mind thesis, according to which cognition can and often does take place partly outside of brain and body via the active use of external aids and props. Finally, in chapter V, I consider the question of whether, given the perceptual phenomenology described in chapter II and the case for cognitive extension presented in chapter IV, consciousness might also be said to be extended, and argue that if certain assumptions are granted, it can

The effect of prefabricated wrist-hand orthoses on grip strength

Prefabricated wrist-hand orthoses (WHOs) are commonly prescribed to manage the functional deficit and compromised grip strength as a result of rheumatoid changes. It is thought that an orthosis which improves wrist extension, reduces synovitis and increases the mechanical advantage of the flexor muscles will improve hand function. Previous studies report an initial reduction in grip strength with WHO use which may increase following prolonged use. Using normal subjects, and thus in the absence of pain as a limiting factor, the impact of ten WHOs on grip strength was measured using a Jamar dynamometer. Tests were performed with and without WHOs by right-handed, female subjects, aged 20-50 years over a ten week period. During each test, a wrist goniometer and a forearm torsiometer were used to measure wrist joint position when maximum grip strength was achieved. The majority of participants achieved maximum grip strength with no orthosis at 30° extension. All the orthoses reduced initial grip strength but surprisingly the restriction of wrist extension did not appear to contribute in a significant way to this. Reduction in grip must therefore also be attributable to WHO design characteristics or the quality of fit. The authors recognize the need for research into the long term effect of WHOs on grip strength. However if grip is initially adversely affected, patients may be unlikely to persevere with treatment thereby negating all therapeutic benefits. In studies investigating patient opinions on WHO use, it was a stable wrist rather than a stronger grip reported to have facilitated task performance. This may explain why orthoses that interfere with maximum grip strength can improve functional task performance. Therefore while it is important to measure grip strength, it is only one factor to be considered when evaluating the efficacy of WHOs

Feeding skills and the effect of injury on wild chimpanzees

While gorillas and orangutans have been shown to display considerable manual skill in obtaining certain plant foods, complex feeding skills in chimpanzees have only been described in the restricted context of tool use. This thesis provides the first study of plant-processing skills in a non-tool using community of chimpanzees in Budongo Forest, Uganda. Furthermore, this community contains over 20% of individuals with upper or lower limb injuries. The strategies used by injured individuals in compensating for injury were investigated through a comparison of feeding skill between the able-bodied and injured population. A cognitive approach to feeding behaviour in chimpanzees was adopted, with respect to the implications this may have for overcoming the effects of injury. Chimpanzees were found to employ a broad range of skills in feeding, reflecting variation in their environment and in their diet. Three food types were examined, each illustrating a particular aspect of feeding skill. In processing leaves of Broussonettia papyrifera, chimpanzees use complex multi-stage feeding techniques, employ bimanual co-ordination at several stages and elicit behaviour that is hierarchical in overall organisation. Able-bodied individuals show considerable standardisation in their feeding with a preference for two techniques. In contrast, when feeding on figs, chimpanzees rely upon simple processing techniques but at the same time employ strategies that serve to minimize the effects of feeding competition. In the case of Ficus mucuso chimpanzees co-ordinate several handfuls of food simultaneously between limbs, and with Ficus sur, chimpanzees display a range of dynamic feeding postures and positions in order to access food patches and increase relative food availability. No significant hand preferences were found in any of the three feeding tasks. Even the most severe of injuries does not result in a decline in feeding efficiency, and the possible mechanisms contributing to this were addressed. Injured individuals were found not to invent novel solutions to familiar tasks, but instead to modify their existing repertoire in order to work around their injuries, thus sharing the program-level organisation observed in able-bodied individuals and compensating at the level of individual actions. However, the physical limitations imposed by the injured limb considerably reduce bimanual coordination and manoeuvrability in the tree, which may have long-term negative implications

Proceedings of the European Conference on Agricultural Engineering AgEng2021

This proceedings book results from the AgEng2021 Agricultural Engineering Conference under auspices of the European Society of Agricultural Engineers, held in an online format based on the University of Évora, Portugal, from 4 to 8 July 2021. This book contains the full papers of a selection of abstracts that were the base for the oral presentations and posters presented at the conference. Presentations were distributed in eleven thematic areas: Artificial Intelligence, data processing and management; Automation, robotics and sensor technology; Circular Economy; Education and Rural development; Energy and bioenergy; Integrated and sustainable Farming systems; New application technologies and mechanisation; Post-harvest technologies; Smart farming / Precision agriculture; Soil, land and water engineering; Sustainable production in Farm buildings