453 research outputs found
Development of n-DoF Preloaded structures for impact mitigation in cobots
A core issue in collaborative robotics is that of impact mitigation, especially when collisions happen with operators. Passively compliant structures can be used as the frame of the cobot, although, usually, they are implemented by means of a single-degree-offreedom (DoF). However, n-DoF preloaded structures offer a number of advantages in terms of flexibility in designing their behavior. In this work, we propose a comprehensive framework for classifying n-DoF preloaded structures, including one-, two-, and threedimensional arrays. Furthermore, we investigate the implications of the peculiar behavior of these structures-which present sharp stiff-to-compliant transitions at designdetermined load thresholds-on impact mitigation. To this regard, an analytical n-DoF dynamic model was developed and numerically implemented. A prototype of a 10DoF structure was tested under static and impact loads, showing a very good agreement with the model. Future developments will see the application of n-DoF preloaded structures to impact-mitigation on cobots and in the field of mobile robots, as well as to the field of novel architected materials
Down-Conditioning of Soleus Reflex Activity using Mechanical Stimuli and EMG Biofeedback
Spasticity is a common syndrome caused by various brain and neural injuries, which can severely impair walking ability and functional independence. To improve functional independence, conditioning protocols are available aimed at reducing spasticity by facilitating spinal neuroplasticity. This down-conditioning can be performed using different types of stimuli, electrical or mechanical, and reflex activity measures, EMG or impedance, used as biofeedback variable. Still, current results on effectiveness of these conditioning protocols are incomplete, making comparisons difficult. We aimed to show the within-session task- dependent and across-session long-term adaptation of a conditioning protocol based on mechanical stimuli and EMG biofeedback. However, in contrast to literature, preliminary results show that subjects were unable to successfully obtain task-dependent modulation of their soleus short-latency stretch reflex magnitude
Enhancing the Performance of a Biomimetic Robotic Elbow-and-Forearm System Through Bionics-Inspired Optimization
This paper delineates the formulation and verification of an innovative
robotic forearm and elbow design, mirroring the intricate biomechanics of human
skeletal and ligament systems. Conventional robotic models often undervalue the
substantial function of soft tissues, leading to a compromise between
compactness, safety, stability, and range of motion. In contrast, this study
proposes a holistic replication of biological joints, encompassing bones,
cartilage, ligaments, and tendons, culminating in a biomimetic robot. The
research underscores the compact and stable structure of the human forearm,
attributable to a tri-bone framework and diverse soft tissues. The methodology
involves exhaustive examinations of human anatomy, succeeded by a theoretical
exploration of the contribution of soft tissues to the stability of the
prototype. The evaluation results unveil remarkable parallels between the range
of motion of the robotic joints and their human counterparts. The robotic elbow
emulates 98.8% of the biological elbow's range of motion, with high torque
capacities of 11.25 Nm (extension) and 24 Nm (flexion). Similarly, the robotic
forearm achieves 58.6% of the human forearm's rotational range, generating
substantial output torques of 14 Nm (pronation) and 7.8 Nm (supination).
Moreover, the prototype exhibits significant load-bearing abilities, resisting
a 5kg dumbbell load without substantial displacement. It demonstrates a payload
capacity exceeding 4kg and rapid action capabilities, such as lifting a 2kg
dumbbell at a speed of 0.74Hz and striking a ping-pong ball at an end-effector
speed of 3.2 m/s. This research underscores that a detailed anatomical study
can address existing robotic design obstacles, optimize performance and
anthropomorphic resemblance, and reaffirm traditional anatomical principles
Advances in Bio-Inspired Robots
This book covers three major topics, specifically Biomimetic Robot Design, Mechanical System Design from Bio-Inspiration, and Bio-Inspired Analysis on A Mechanical System. The Biomimetic Robot Design part introduces research on flexible jumping robots, snake robots, and small flying robots, while the Mechanical System Design from Bio-Inspiration part introduces Bioinspired Divide-and-Conquer Design Methodology, Modular Cable-Driven Human-Like Robotic Arm andWall-Climbing Robot. Finally, in the Bio-Inspired Analysis on A Mechanical System part, research contents on the control strategy of Surgical Assistant Robot, modeling of Underwater Thruster, and optimization of Humanoid Robot are introduced
Recommended from our members
Performance and manufacturing considerations for series elastic actuators
Robots are becoming an integral part of our lives. We are already physically connected with them through many robotic applications such as exoskeletons in military, orthosis devices in health care, collaborative robots in industry, etc. While the integration of robots improves the quality of human life, it still poses a safety concern during the physical human-robot interaction. Series Elastic Actuators (SEAs) play an important role in improving the safety of human-robot interaction and collaboration. Considering the fast expansion of robotic applications in our lives and the safety benefits of SEAs, it is conceivable that SEAs are going to play an important role in robotic applications in every aspect of human life. This dissertation focuses on reducing the cost, simplifying the use and improving the performance of SEAs. The first research focus in this dissertation is to reduce the cost of SEAs. Robots are successful in reducing production and service costs when used but the capital cost of robot installations are very high. As robotics research shifts to safe robotic applications, reducing the cost of SEAs will greatly help to deploy this technology in more robotic applications and to increase their accessibility to a broader range of researchers and educators. With this motivation, I present a case study on reducing the cost of a SEA while maintaining high force and position control performance and industrial grade service life. The second research focus in this dissertation is to simplify the laborious gain selection process of the cascaded controllers of SEAs. In order to simplify the gain selection process of the impedance controllers of SEAs, an optimal feedback gain selection methodology was developed. Using this method, the feedback gains of the cascaded PD-type impedance controllers of SEAs can easily be calibrated. The developed method allows the users to find the highest feedback gains for a desired phase-margin. Beyond the low-cost realization and simple controller tuning of SEAs, performance improvements on SEAs are possible utilizing the series elasticity in these actuators. As the third research focus in this dissertation, a sequential convex optimization-based motion planning technique is developed in order to improve the joint velocity capabilities of SEAs with nonlinearities. By using this method, higher joint velocities, that are not achievable with the rigid counterparts of SEAs can be achievedMechanical Engineerin
MotorSkinsâa bio-inspired design approach towards an interactive soft-robotic exosuit
The work presents a bio-inspired design approach to a soft-robotic solution for assisting the knee-bending in users with reduced mobility in lower limbs. Exosuits and fluid-driven actuators are fabric-based devices that are gaining increasing relevance as alternatives assistive technologies that can provide simpler, more flexible solutions in comparison with the rigid exoskeletons. These devices, however, commonly require an external energy supply or a pressurized-fluid reservoir, which considerably constrain the autonomy of such solutions. In this work, we introduce an event-based energy cycle (EBEC) design concept, that can harvest, store, and release the required energy for assisting the knee-bending, in a synchronised interaction with the user and the environment, thus eliminating any need for external energy or control input. Ice-plant hydro-actuation system served as the source of inspiration to address the specific requirements of such interactive exosuit through a fluid-driven material system. Based on the EBEC design concepts and the abstracted bio-inspired principles, a series of (material and process driven) design experimentations helped to address the challenges of realising various functionalities of the harvest, storage, actuation and control instances within a closed hydraulic circuit. Sealing and defining various areas of water-tight seam made out of thermoplastic elastomers provided the base material system to program various chambers, channels, flow-check valves etc of such EBEC system. The resulting fluid-driven EBEC-skin served as a proof of concept for such active exosuit, that brings these functionalities into an integrated âsense-actingâ material system, realising an auto-synchronised energy and information cycles. The proposed design concept can serve as a model for development of similar fluid-driven EBEC soft-machines for further applications. On the more general scheme, the work presents an interdisciplinary design-science approach to bio-inspiration and showcases how biological material solutions can be looked at from a design/designer perspective to bridge the bottomâup and topâdown approach to bio-inspiration.Deutsche Forschungsgemeinschafthttps://doi.org/10.13039/501100001659Peer Reviewe
Design and integration of a parallel, soft robotic end-effector for extracorporeal ultrasound
Objective: In this work we address limitations in state-of-the-art ultrasound
robots by designing and integrating a novel soft robotic system for ultrasound
imaging. It employs the inherent qualities of soft fluidic actuators to
establish safe, adaptable interaction between ultrasound probe and patient.
Methods: We acquire clinical data to determine the movement ranges and force
levels required in prenatal foetal ultrasound imaging and design the soft
robotic end-effector accordingly. We verify its mechanical characteristics,
derive and validate a kinetostatic model and demonstrate controllability and
imaging capabilities on an ultrasound phantom. Results: The soft robot exhibits
the desired stiffness characteristics and is able to reach 100% of the required
workspace when no external force is present, and 95% of the workspace when
considering its compliance. The model can accurately predict the end-effector
pose with a mean error of 1.18+/-0.29mm in position and 0.92+/-0.47deg in
orientation. The derived controller is, with an average position error of
0.39mm, able to track a target pose efficiently without and with externally
applied loads. Ultrasound images acquired with the system are of equally good
quality compared to a manual sonographer scan. Conclusion: The system is able
to withstand loads commonly applied during foetal ultrasound scans and remains
controllable with a motion range similar to manual scanning. Significance: The
proposed soft robot presents a safe, cost-effective solution to offloading
sonographers in day-to-day scanning routines. The design and modelling
paradigms are greatly generalizable and particularly suitable for designing
soft robots for physical interaction tasks
Review of Computational Fluid Dynamics Analysis in Biomimetic Applications for Underwater Vehicles
Biomimetics, which draws inspiration from nature, has emerged as a key approach in the development of underwater vehicles. The integration of this approach with computational fluid dynamics (CFD) has further propelled research in this field. CFD, as an effective tool for dynamic analysis, contributes significantly to understanding and resolving complex fluid dynamic problems in underwater vehicles. Biomimetics seeks to harness innovative inspiration from the biological world. Through the imitation of the structure, behavior, and functions of organisms, biomimetics enables the creation of efficient and unique designs. These designs are aimed at enhancing the speed, reliability, and maneuverability of underwater vehicles, as well as reducing drag and noise. CFD technology, which is capable of precisely predicting and simulating fluid flow behaviors, plays a crucial role in optimizing the structural design of underwater vehicles, thereby significantly enhancing their hydrodynamic and kinematic performances. Combining biomimetics and CFD technology introduces a novel approach to underwater vehicle design and unveils broad prospects for research in natural science and engineering applications. Consequently, this paper aims to review the application of CFD technology in the biomimicry of underwater vehicles, with a primary focus on biomimetic propulsion, biomimetic drag reduction, and biomimetic noise reduction. Additionally, it explores the challenges faced in this field and anticipates future advancements
Contemporary Robotics
This book book is a collection of 18 chapters written by internationally recognized experts and well-known professionals of the field. Chapters contribute to diverse facets of contemporary robotics and autonomous systems. The volume is organized in four thematic parts according to the main subjects, regarding the recent advances in the contemporary robotics. The first thematic topics of the book are devoted to the theoretical issues. This includes development of algorithms for automatic trajectory generation using redudancy resolution scheme, intelligent algorithms for robotic grasping, modelling approach for reactive mode handling of flexible manufacturing and design of an advanced controller for robot manipulators. The second part of the book deals with different aspects of robot calibration and sensing. This includes a geometric and treshold calibration of a multiple robotic line-vision system, robot-based inline 2D/3D quality monitoring using picture-giving and laser triangulation, and a study on prospective polymer composite materials for flexible tactile sensors. The third part addresses issues of mobile robots and multi-agent systems, including SLAM of mobile robots based on fusion of odometry and visual data, configuration of a localization system by a team of mobile robots, development of generic real-time motion controller for differential mobile robots, control of fuel cells of mobile robots, modelling of omni-directional wheeled-based robots, building of hunter- hybrid tracking environment, as well as design of a cooperative control in distributed population-based multi-agent approach. The fourth part presents recent approaches and results in humanoid and bioinspirative robotics. It deals with design of adaptive control of anthropomorphic biped gait, building of dynamic-based simulation for humanoid robot walking, building controller for perceptual motor control dynamics of humans and biomimetic approach to control mechatronic structure using smart materials
- âŠ