Heuristic performance model of optical buffers for variable length packets

Optical switching (optical packet switching, optical burst switching, and others) provides alternatives to the current switching in backbone networks. To switch optically, also packet buffering is to be done optically, by means of fiber delay lines (FDLs). Characteristic of the resulting optical buffer is the quantization of possible delays: Only delays equal to the length of one of the FDLs can be realized. An important design challenge is the optimization of the delay line lengths for minimal packet loss. To this end, we propose a heuristic based on two existing queueing models: one with quantization and one with impatience. Combined, these models yield an accurate performance modeling heuristic. A key advantage of this heuristic is that it translates the optical buffer problem into two well-known queueing problems, with accurate performance expressions available in the literature. This paper presents the heuristic in detail, together with several figures, comparing the heuristic's output to existing approaches, validating its high accuracy

Cross-Layer Platform for Dynamic, Energy-Efficient Optical Networks

The design of the next-generation Internet infrastructure is driven by the need to sustain the massive growth in bandwidth demands. Novel, energy-efficient, optical networking technologies and architectures are required to effectively meet the stringent performance requirements with low cost and ultrahigh energy efficiencies. In this thesis, a cross-layer communications platform is proposed to enable greater intelligence and functionality on the physical layer. Providing the optical layer with advanced networking capabilities will facilitate the dynamic management and optimization of optical switching based on performance monitoring measurements and higher-layer attributes. The cross-layer platform aims to create a new framework for networks to incorporate packet-scale measurement subsystems and techniques for monitoring the health of the optical channel. This will allow for quality-of-service- and energy-aware routing schemes, as well as an enhanced awareness of the optical data signals. This thesis first presents the design and development of an optical packet switching fabric. Leveraging a networking test-bed environment to validate networking hypotheses, advanced switching functionalities are demonstrated, including the support for quality-of-service based routing and packet multicasting. The investigated cross-layering is based on emerging optical technologies, enabling packet protection techniques and packet-rate switching fabric reconfiguration. Coupled with fast performance monitoring, the platform will achieve significant performance gains within the endeavor of all-optical switching. Allowing for a more intelligent, programmable optical layer aims to support greater flexibility with respect to bandwidth allocation and potentially a significant reduction in the network's energy consumption. The ultimate deliverable of this work is a high-performance, cross-layer enabled optical network node. The experimental demonstration of an initial prototype creates a dynamic network element with distributed control plane management, featuring fast packet-rate optical switching capabilities and embedded physical-layer performance monitoring modules. The cross-layer box enables an intelligent traffic delivery system that can dynamically manipulate optical switching on a packet-granular scale. With the goal of achieving advanced multi-layer routing and control algorithms, the network node requires an intelligent co-optimization across all the layers. The proposed cross-layer design should drive optical technologies and architectures in an innovative way, in order to fulfill the void between the design of basic photonic devices and the networking protocols that use them. The performance of the entire network -- from the optical components, to the routing algorithms and user applications -- should be optimized in concert. This contribution to the area of cross-layer network design creates an adaptable optical pipe that is extremely flexible and intelligent aware of both the physical optical signals and higher-layer requirements. The impact of this work will be seen in the realization of dynamic, energy-efficient optical communication links in future networking infrastructures

On optimization of optical packet switches with reconfiguration overhead

Optical packet switching is one of the most promising technologies for carrying IP traffic over WDM optical networks. For optical packet switch (OPS) design, due to the reconfiguration overhead in the switch fabric, packet delay and speedup are two key factors to be considered. Existing scheduling algorithms, DOUBLE [4] and ADAPTIVE [5], make effective tradeoff between these two factors. In this paper, we show that the performance of both DOUBLE and ADAPTIVE, as well as their underlying OPS switch architecture, can be further optimized. Our proposed solutions are shown to effectively reduce both speedup and packet delay at the same time without incurring any extra cost. © 2005 IEEE.published_or_final_versio

Control Plane Hardware Design for Optical Packet Switched Data Centre Networks

Optical packet switching for intra-data centre networks is key to addressing traffic requirements. Photonic integration and wavelength division multiplexing (WDM) can overcome bandwidth limits in switching systems. A promising technology to build a nanosecond-reconfigurable photonic-integrated switch, compatible with WDM, is the semiconductor optical amplifier (SOA). SOAs are typically used as gating elements in a broadcast-and-select (B\&S) configuration, to build an optical crossbar switch. For larger-size switching, a three-stage Clos network, based on crossbar nodes, is a viable architecture. However, the design of the switch control plane, is one of the barriers to packet switching; it should run on packet timescales, which becomes increasingly challenging as line rates get higher. The scheduler, used for the allocation of switch paths, limits control clock speed. To this end, the research contribution was the design of highly parallel hardware schedulers for crossbar and Clos network switches. On a field-programmable gate array (FPGA), the minimum scheduler clock period achieved was 5.0~ns and 5.4~ns, for a 32-port crossbar and Clos switch, respectively. By using parallel path allocation modules, one per Clos node, a minimum clock period of 7.0~ns was achieved, for a 256-port switch. For scheduler application-specific integrated circuit (ASIC) synthesis, this reduces to 2.0~ns; a record result enabling scalable packet switching. Furthermore, the control plane was demonstrated experimentally. Moreover, a cycle-accurate network emulator was developed to evaluate switch performance. Results showed a switch saturation throughput at a traffic load 60\% of capacity, with sub-microsecond packet latency, for a 256-port Clos switch, outperforming state-of-the-art optical packet switches

Packet Loss Rate Differentiation in slotted Optical Packet Switching OCDM/WDM

We propose a multi-class mechanism for Optical Code Division Multiplexing (OCDM), Wavelength Division Multiplexing (WDM) Optical Packet Switch (OPS) architecture capable of supporting Quality of Service (QoS) transmission. OCDM/WDM has been proposed as a competitive hybrid switching technology to support the next generation optical Internet. This paper addresses performance issues in the slotted OPS networks and proposed four differentiation schemes to support Quality of Service. In addition, we present a comparison between the proposed schemes as well as, a simulation scheduler design which can be suitable for the core switch node in OPS networks. Using software simulations the performance of our algorithm in terms of losing probability, the packet delay, and scalability is evaluated

Advanced logic gates for ultrafast network interchanges

By overcoming speed bottlenecks from electronic switching as well as optical/electronic conversions, all‐optical logic gates can permit further exploitation of the nearly 40 THz of bandwidth available from optical fibers. We focus on the use of optical solitons and all‐optical logic gates to implement ultrafast ‘‘interchanges’’ or switching nodes on packet networks with speeds of 100 Gbit/s or greater. For example, all‐optical logic gates have been demonstrated with speeds up to 200 Gbit/s, and they may be used to decide whether to add or drop a data packet. The overall goal of our effort is to demonstrate the key enabling technologies and their combination for header processing in 100 Gbit/s, time‐division‐multiplexed, packed switched networks. Soliton‐based fiber logic gates are studied with the goal of combining attractive features of soliton‐dragging logic gates, nonlinear loop mirrors, and erbium‐doped fiber amplifiers to design logic gates with optimum switching energy, contrast ratio, and timing sensitivity. First, the experimental and numerical work studies low‐latency soliton logic gates based on frequency shifts associated with cross‐phase modulation. In preliminary experiments, switching in 15 m long low‐birefringent fibers has been demonstrated with a contrast ratio of 2.73:1. Using dispersion‐shifted fiber in the gate should lower the switching energy and improve the contrast ratio. Next, the low‐birefringent fiber can be cross‐spliced and wrapped into a nonlinear optical loop mirror to take advantage of mechanisms from both soliton dragging and loop mirrors. The resulting device can have low switching energy and a timing window that results from a combination of soliton dragging and the loop mirror mechanisms.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/87474/2/605_1.pd

Architecture, design, and modeling of the OPSnet asynchronous optical packet switching node

An all-optical packet-switched network supporting multiple services represents a long-term goal for network operators and service providers alike. The EPSRC-funded OPSnet project partnership addresses this issue from device through to network architecture perspectives with the key objective of the design, development, and demonstration of a fully operational asynchronous optical packet switch (OPS) suitable for 100 Gb/s dense-wavelength-division multiplexing (DWDM) operation. The OPS is built around a novel buffer and control architecture that has been shown to be highly flexible and to offer the promise of fair and consistent packet delivery at high load conditions with full support for quality of service (QoS) based on differentiated services over generalized multiprotocol label switching

Designing a multi-hop regular virtual topology for ultrafast optical packet switching : node placement optimisation and/or dilation minimisation?

This paper studies the design of multi-hop regular virtual topologies to facilitate optical packet switching in networks with arbitrary physical topologies. The inputs to the virtual topology design problem are the physical topology, the traffic matrix and the regular topology. In this paper, this problem is tackled directly and also by decomposition into two sub-problems. The first sub-problem, dilation minimisation, uses only the physical topology and the virtual topology as optimisation inputs. The second sub-problem considers the traffic matrix and virtual topology as optimisation inputs. The solutions of these two sub-problems are compared with each other and against the results obtained when the global problem is optimised (using all three possible input parameters) for a variety of traffic scenarios. This gives insight into the key question of whether the physical topology or the traffic matrix is the more important parameter when designing a regular virtual topology for optical packet switching. Regardless of the approach taken the problem is intractable and hence heuristics must be used to find (near) optimal solutions in reasonable time. Five different optimisation heuristics, using different artificial intelligence techniques, are employed in this paper. The results obtained by the heuristics for the three alternative design approaches are compared under a variety of traffic scenarios. An important conclusion of this paper is that the traffic matrix plays a less significant role than is conventionally assumed, and only a marginal penalty is incurred by disregarding it in several of the traffic cases considered