Moxon based RFID tag reader and GPS antenna

Modern communication applications at UHF frequencies require antennas with wide band, high forward gain, low backward radiation, high cross-polarization, small size and low manufacture cost. The Moxon antenna based on a two element Yagi-Uda antenna over the ground reflector is one of the most favorite antennas for HAM operators which can produce outstanding front to back ratio of radiated power, good match over the desired band and relatively low elevation height. A sequence of topologies has been proposed from a single vertical element to two vertical elements of the Moxon arms, until the lately patented Broadband Circularly Polarized Moxon Based Antennas for UHF satellite communications (SATCOM). The logic was to obtain the best possible performance based on Fano-Chu limits for electrically small antenna with maximum radiating elements in a given volume. This dissertation is an extension of this configuration to cover Radio Frequency IDentification (RFID) (850 MHz-1050 MHz) and Global Positioning System (GPS) (centered at 1227 MHz and 1575 MHz) bands. Prototype antennas are built based on HFSS-11 simulations and experimental measurements yielded satisfactory results. Various design parameters of the proposed complex antenna are optimized to obtain a significant size reduction and much improved performance than the commercial counterpart antennas

Advanced Circularly Polarised Microstrip Patch Antennas

The thesis describes outcomes of research on advanced circularly polarised antennas. The proposed designs are intended for integration into small mobile devices, therefore low profile and easy manufacturability are key parameters, along with good CP radiation properties. The designs were validated by simulation and measurement, and are also backed by theory and design guidelines. The primary focus is on the development of planar omnidirectional circularly polarised antennas, which are fabricated using multilayer PCB techniques and thus are lightweight and cost-efficient. Unlike in classical microstrip patch antenna designs, the groundplane of the proposed antenna was substantially reduced. This helps to achieve an omnidirectional circular polarisation pattern and miniaturize the antenna, however at the cost of increased feed circuit complexity. The basic design, its advantages and disadvantages are discussed in Section 3. In the next step, the omnidirectional circularly polarised antenna was extended with additional, advanced features. A miniaturized version is investigated, which offers a 20% footprint reduction by folding parts of the patch underneath itself. Further miniaturization is possible by increasing the dielectric constant of the substrate. A method to adjust the omnidirectional circularly polarised antenna performance by trimming four lumped capacitors is also investigated. Manufacturing inaccuracy in large scale production may cause some of the units to radiate outside of the desired frequencies. By integrating four trimmed capacitors into the antenna it can be precisely tuned to the desired band. Simulated results demonstrate this property by trimming the antenna between GPS L1 band (centre frequency at 1.575 GHz) and Galileo/Beidou-2 E2 band (1.561 GHz). Furthermore, a dual-band omnidirectional circularly polarised antenna is presented, which employs slots and capacitor loading to steer the current path of the first and second resonant mode. The design offers a small frequency ratio of 1.182. The methods to obtain a planar omnidirectional circularly polarised antenna have been further advanced to propose a reconfigurable antenna. The beam reconfiguration is capable of rotating it dipole-like radiation pattern around an axis, thus allowing reception or transmission from any spherical angle. The switching method is simple and does not require any semiconductor devices. Finally, a dual circularly polarised antenna is presented, which achieves dual-polarisation by employing even and odd modes in a coplanar waveguide. This technique allows greater flexibility and size reduction of the feed network, as two signals can be transmitted by a single multi-mode transmission line. Simulated results demonstrate this property by trimming the antenna between GPS L1 band (centre frequency at 1.575 GHz) and Galileo/Beidou-2 E2 band (1.561 GHz). Furthermore, a dual-band omnidirectional circularly polarised antenna is presented, which employs slots and capacitor loading to steer the current path of the first and second resonant mode. The design offers a small frequency ratio of 1.182. The methods to obtain a planar omnidirectional circularly polarised antenna have been further advanced to propose a reconfigurable antenna. The beam reconfiguration is capable of rotating it dipole-like radiation pattern around an axis, thus allowing reception or transmission from any spherical angle. The switching method is simple and does not require any semiconductor devices. Finally, a dual circularly polarised antenna is presented, which achieves dual-polarisation by employing even and odd modes in a coplanar waveguide. This technique allows greater flexibility and size reduction of the feed network, as two signals can be transmitted by a single multi-mode transmission line

Design and synthesis of non-uniform high impedance surface-based wearable antennas

This thesis is concerned with the design and fabrication of flexible textile wearable antennas integrated with the newly introduced artificial materials known as high impedance surfaces (HIS). With the rapid growth and use of wireless communication systems more and more people are taking advantage of portable computing systems on daily basis. Also with the advancement in electronic industry new and sophisticated wireless devices have been introduced which are being used closed to human body. For user convenience there is an increasing need for integrating antennas on or in the clothing. The conventional antennas being rigid and obtrusive to user movements have limitations. There is a need of antennas made of flexible textile materials that can be part of user clothing defined as wearable antennas. Also with the miniaturisation trend in electronic industry, antenna designers are facing a challenge to come up with a compact, low profile,multi function efficient antenna designs occupying a small physical space. By integrating antennas in user clothing this limited space problem can also be resolved. With the easy availability of electro textile materials it is now possible to manufacture complete fabric antennas. The entire design cycle of wearable fabric antennas starting from material selection to prototype fabrication and antenna testing was carried out in this thesis. A novel technique for antenna fabrication using electro textile material is proposed that will have major implications on wearable computing industry. The use of HIS for antenna performance enhancement is growing at a rapid pace. In this thesis a modified wearable form of HIS defined as non uniform HIS is presented and successfully integrated with antenna for improved performance under low profile limitation. The HIS was also integrated with normal patch antenna to reduce its size and improve its gain and impedance bandwidth. These wearable antennas were then tested under real operating conditions. The measured results validated the design idea and showed that there are many possibilities for these unique artificial materials to be exploited for future wearable on body communication antennas

Artificial Magnetic Conductor Integrated Textile Monopole Antenna

Wearable antenna is a fast growing field in application-oriented research, which introduced a new generation of garments capable of monitoring wear health, as well as environmental states. This thesis is concerned with the design and fabrication of a compact textile wearable antenna at operating frequency within the Industrial, Scientific and Medical (ISM) band, intended for integration into a flight jacket of the astronaut inside the habitat. The antenna is integrated with artificial material known as High Impedance Surface (HIS) for performance enhancement. The purpose of the system is to constantly monitor vital signals of the astronauts. The entire design cycle of wearable Co-Planar Waveguide (CPW) fed monopole antenna, starting from simulation-based design to fabricated prototype and antenna testing under different conditions was carried out in this thesis. Because of the lossy nature of human body tissues, the radiation efficiency of the antenna will be reduced due to the absorption of the radiated energy. Hence, changes in the radiation characteristics of the wearable antenna like operating frequency, gain and impedance bandwidth will take place. To overcome these challenges, HIS has been suggested and integrated with the monopole antenna to isolate the antenna from the ambient environments. This wearable antenna was tested under real operating conditions such as bending and crumpling conditions. Moreover, as the antenna operates near human body tissues, Specific Absorption Rate (SAR) assessment is required to consider the safety concerns of the antenna system. SAR analysis based on simulation results has been carried out in this thesis to show a significant reduction in SAR with the usage of HIS in the antenna system

A comprehensive survey on 'circular polarized antennas' for existing and emerging wireless communication technologies

Circular polarized (CP) antennas are well suited for long-distance transmission attainment. In order to be adaptable for beyond 5G communication, a detailed and systematic investigation of their important conventional features is required for expected enhancements. The existing designs employing millimeter wave, microwave, and ultra-wideband (UWB) frequencies form the elementary platform for future studies. The 3.4-3.8 GHz frequency band has been identified as a worthy candidate for 5G communications because of spectrum availability. This band comes under UWB frequencies (3.1-10.6 GHz). In this survey, a review of CP antennas in the selected areas to improve the understanding of early-stage researchers specially experienced antenna designers has presented for the first time as best of our knowledge. Design implementations involving size, axial ratio, efficiency, and gain improvements are covered in detail. Besides that, various design approaches to realize CP antennas including (a) printed CP antennas based on parasitic or slotted elements, (b) dielectric resonator CP antennas, (c) reconfigurable CP antennas, (d) substrate integrated waveguide CP antennas, (e) fractal CP antennas, (f) hybrid techniques CP antennas, and (g) 3D printing CP antennas with single and multiple feeding structures have investigated and analyzed. The aim of this work is to provide necessary guidance for the selection of CP antenna geometries in terms of the required dimensions, available bandwidth, gain, and useful materials for the integration and realization in future communication systems

Antennas and Propagation

This Special Issue gathers topics of utmost interest in the field of antennas and propagation, such as: new directions and challenges in antenna design and propagation; innovative antenna technologies for space applications; metamaterial, metasurface and other periodic structures; antennas for 5G; electromagnetic field measurements and remote sensing applications