743 research outputs found
Pulse-power-detection analysis of incoherent O-CDMA systems under the influence of fiber temperature fluctuations
In this paper, a pulse-shift technique, which divides every time slot (or chip) into equal-width sub-chips, is used to model the effect of fiber temperature fluctuations in incoherent optical code-division multiple-access (O-CDMA) systems. With the advance in all-optical thresholding technology, power detection of ultrashort optical pulses is possible. This paper also formulates a new pulse-power-detection model for incoherent OCDMA and applies it to the analysis of the pulse-shift technique as a case study. Numerical studies and computer simulations are presented to validate the new analytical model. Our study presents a more realistic theoretical model of all-optical thresholding in incoherent O-CDMA and results in better performance than the conventional pulse-energy-detection model
Simulation and Noise Analysis of Multimedia Transmission in Optical CDMA Computer Networks
This paper simulates and analyzes noise of multimedia transmission in a flexible optical code division multiple access (OCDMA) computer network with different quality of service (QoS) requirements. To achieve multimedia transmission in OCDMA, we have proposed strict variable-weight optical orthogonal codes (VW-OOCs), which can guarantee the smallest correlation value of one by the optimal design. In developing multimedia transmission for computer network, a simulation tool is essential in analyzing the effectiveness of various transmissions of services. In this paper, implementation models are proposed to analyze the multimedia transmission in the representative of OCDMA computer networks by using MATLAB simulink tools. Simulation results of the models are discussed including spectrums outputs of transmitted signals, superimposed signals, received signals, and eye diagrams with and without noise. Using the proposed models, multimedia OCDMA computer network using the strict VW-OOC is practically evaluated. Furthermore, system performance is also evaluated by considering avalanche photodiode (APD) noise and thermal noise. The results show that the system performance depends on code weight, received laser power, APD noise, and thermal noise which should be considered as important parameters to design and implement multimedia transmission in OCDMA computer networks
Applications of perfect difference codes in fiber-optics and wireless optical code-division multiplexing/multiple-access systems
After establishing itself in the radio domain, Spread spectrum code-division
multiplexing/multiple-access (CDMA) has seen a recent upsurge in optical
domain as well. Due to its fairness, flexibility, service differentiation and
increased inherent security, CDMA is proved to be more suitable for the bursty
nature of local area networks than synchronous multiplexing techniques like
Frequency/Wavelength Division Multiplexing (F/WDM) and Time Division
Multiplexing (TDM). In optical domain, CDMA techniques are commonly known
as Optical-CDMA (O-CDMA). All optical CDMA systems are plagued with the
problem of multiple-access interference (MAI). Spectral amplitude coding (SAC)
is one of the techniques used in the literature to deal with the problem of MAI.
The choice of spreading code in any CDMA system is another way to ensure the
successful recovery of data at the receiving end by minimizing the effect of MAI
and it also dictates the hardware design of the encoder and decoder.
This thesis focuses on the efficient design of encoding and decoding hardware.
Perfect difference codes (PDC) are chosen as spreading sequences due to their
good correlation properties. In most of the literature, evaluation of error
probability is based on the assumptions of ideal conditions. Such assumptions
ignore major physical impairments such as power splitting losses at the
multiplexers of transmitters and receivers, and gain losses at the receivers, which
may in practice be an overestimate or underestimate of the actual probability of
error.
This thesis aims to investigate thoroughly with the consideration of practical
impairments the applications of PDCs and other spreading sequences in optical
communications systems based on spectral-amplitude coding and utilizing codedivision
as multiplexing/multiple-access technique. This work begins with a
xix
general review of optical CDMA systems. An open-ended practical approach has
been used to evaluate the actual error probabilities of OCDM/A systems under
study. It has been concluded from results that mismatches in the gains of
photodetectors, namely avalanche photodiode (APDs), used at the receiver side
and uniformity loss in the optical splitters results in the inaccurate calculation of
threshold level used to detect the data and can seriously degrade the system bit
error rate (BER) performance. This variation in the threshold level can be
compensated by employing techniques which maintain a constant interference
level so that the decoding architecture does not have to estimate MAI every time
to make a data bit decision or by the use of balanced sequences.
In this thesis, as a solution to the above problem, a novel encoding and decoding
architecture is presented for perfect difference codes based on common zero code
technique which maintains a constant interference level at all instants in CDM
system and thus relieves the need of estimating interference. The proposed
architecture only uses single multiplexer at the transmitters for all users in the
system and a simple correlation based receiver for each user. The proposed
configuration not only preserves the ability of MAI in Spectral-Amplitude Coding
SAC-OCDM system, but also results in a low cost system with reduced
complexity. The results show that by using PDCs in such system, the influence of
MAI caused by other users can be reduced, and the number of active users can be
increased significantly.
Also a family of novel spreading sequences are constructed called Manchestercoded
Modified Legendre codes (MCMLCs) suitable for SAC based OCDM
systems. MCMLCs are designed to be used for both single-rate and Multirate
systems. First the construction of MCMLCs is presented and then the bit error rate
performance is analyzed.
Finally the proposed encoding/decoding architecture utilizing perfect difference
codes is applied in wireless infrared environment and the performance is found to
be superior to other codes
Optical code-division multiple access system and optical signal processing
This thesis presents our recent researches on the development of coding devices, the
investigation of security and the design of systems in the optical cod-division multiple
access (OCDMA) systems. Besides, the techniques of nonlinear signal processing used
in the OCDMA systems fire our imagination, thus some researches on all-optical signal
processing are carried out and also summarized in this thesis.
Two fiber Bragg grating (FBG) based coding devices are proposed. The first coding
device is a superstructured FBG (SSFBG) using ±π/2-phase shifts instead of
conventional 0/π-phase shifts. The ±π/2-phase-shifted SSFBG en/decoders can not only
conceal optical codes well in the encoded signals but also realize the reutilization of
available codes by hybrid use with conventional 0/π-phase-shifted SSFBG en/decoders.
The second FBG based coding device is synthesized by layer-peeling method, which
can be used for simultaneous optical code recognition and chromatic dispersion
compensation.
Then, two eavesdropping schemes, one-bit delay interference detection and
differential detection, are demonstrated to reveal the security vulnerability of differential
phase-shift keying (DPSK) and code-shift keying (CSK) OCDMA systems.
To address the security issue as well as increase the transmission capacity, an
orthogonal modulation format based on DPSK and CSK is introduced into the OCDMA
systems. A 2 bit/symbol 10 Gsymbol/s transmission system using the orthogonal
modulation format is achieved. The security of the system can be partially guaranteed.
Furthermore, a fully-asynchronous gigabit-symmetric OCDMA passive optical
network (PON) is proposed, in which a self-clocked time gate is employed for signal
regeneration. A remodulation scheme is used in the PON, which let downstream and
upstream share the same optical carrier, allowing optical network units source-free. An
error-free 4-user 10 Gbit/s/user duplex transmission over 50 km distance is reazlied.
A versatile waveform generation scheme is then studied. A theoretical model is
established and a waveform prediction algorithm is summarized. In the demonstration,
various waveforms are generated including short pulse, trapezoidal, triangular and
sawtooth waveforms and doublet pulse.
ii
In addition, an all-optical simultaneous half-addition and half-subtraction scheme is
achieved at an operating rate of 10 GHz by using only two semiconductor optical
amplifiers (SOA) without any assist light.
Lastly, two modulation format conversion schemes are demonstrated. The first
conversion is from NRZ-OOK to PSK-Manchester coding format using a SOA based
Mach-Zehnder interferometer. The second conversion is from RZ-DQPSK to RZ-OOK
by employing a supercontinuum based optical thresholder
Dark signalling and code division multiple access in an optical fibre LAN with a bus topology
This thesis describes an optical fibre network that uses a bus topology and Code Division Multiple Access (CDMA). Various potential configurations are analysed and compared and it is shown that a serious limitation of optical CDMA schemes using incoherent correlators is the effect of optical beating due to the presence of multiple incoherent optical signals at the receiver photodiode. The network proposed and analysed in this thesis avoids beating between multiple optical fields because it only uses a single, shared, optical source. It does this through the SLIM (Single Light-source with In-line Modulation) configuration in which there is a continuously-operating light source at the head-end of a folded bus, and modulators at the nodes to impose signals on the optical field in the form of pulses of darkness which propagate along the otherwise continuously bright bus. Optical CDMA can use optical-fibre delay-line correlators as matched filters, and these may be operated either coherently or incoherently.Coherent operation is significantly more complex than incoherent operation, but incoherent correlators introduce further beating even in a SLIM network. A new design of optical delay-line correlator, the hybrid correlator, is therefore proposed, analysed and demonstrated. It is shown to eliminate beating. A model of a complete network predicts that a SLIMbus using optical CDMA with hybrid correlators can be operated at TeraBaud rates with the number of simultaneous users limited by multiple access interference (MAI), determined only by the combinatorics of the code set
Center for Aeronautics and Space Information Sciences
This report summarizes the research done during 1991/92 under the Center for Aeronautics and Space Information Science (CASIS) program. The topics covered are computer architecture, networking, and neural nets
Space Shuttle/TDRSS communication and tracking systems analysis
In order to evaluate the technical and operational problem areas and provide a recommendation, the enhancements to the Tracking and Data Delay Satellite System (TDRSS) and Shuttle must be evaluated through simulation and analysis. These enhancement techniques must first be characterized, then modeled mathematically, and finally updated into LinCsim (analytical simulation package). The LinCsim package can then be used as an evaluation tool. Three areas of potential enhancements were identified: shuttle payload accommodations, TDRSS SSA and KSA services, and shuttle tracking system and navigation sensors. Recommendations for each area were discussed
A Direct Sequence Code-Division Multiple-Access Local Area Network Model
The United States Air Force relies heavily on computer networks for every-day operations. The medium access control (MAC) protocol currently used by most local area (LAN) permits a single station to access the network at a time (e.g. CSMA/CD or Ethernet). This limits network throughput to, at most, the maximum transmission rate of a single node with overhead neglected. Significant delays are observed when a LAN is overloaded by multiple users attempting to access the common medium. In CSMA/CD, collisions are detected and the data sent by the nodes involved are delayed and transmitted at a later time. The retransmission time is determined with a binary exponential back-off-algorithm. Code Division Multiple Access (CDMA) is a technique that increases channel capacity by allowing multiple signals to occupy the same bandwidth simultaneously. Each signal is spread through multiplication with a unique pseudo-random code that distinguishes it from all other signals. Upon reception, the signal of interest is despread and separated from other incoming signals by multiplying it with the same exact code. With this technique, it is possible for multiple stations to transmit simultaneously with minimal ill effects. A simulation model is developed for a direct sequence spread spectrum CDMA (DS/CDMA) channel that incorporates the effects of multiple access interferers (MAI) having spreading codes from the same or different code families. The model introduces cross-correlation coefficients to calculate the signal-to-interference ratio and determine channel bit error performance. Transmission media attenuation and the near-far effects are accounted for in the model design. The model utility is demonstrated by determining the loss characteristics of a coaxial spread spectrum network. Due to the modular design, other transmission media characteristic can be easily incorporated. A bus network topology is simulated using 10Base2 coaxial cable. The model is compared and validated against a spread spectrum local area network hardware test bed
Investigation of code reconfigurable fibre Bragg gratings for Optical Code Division Multiple Access (OCDMA) and Optical Packet Switching (OPS) Networks
This thesis documents my work in the telecommunication system laboratory at the Optoelectronics Research Centre, towards the implementation of code reconfigurable OCDMA and all-optical packet switching nodes based on fibre Bragg grating (FBG) technology. My research work involves characterizing the performance of various gratings, specifically high reflectivity, short chip duration, long code sequences, multiple phase level and tunable superstructured fiber Bragg gratings (SSFBGs), by using the recently proposed Frequency-Resolved Optical Gating technique based on Electro-Absorption Modulator (EAM-FROG). This technology can obtain the complex code profile along the grating, making it a powerful method to understand the thermally-induced code-reconfigurable grating. Efforts have been made to improve the grating design to achieve better system performance. Three different types of FBGs optical encoder/decoder, e.g. conventional discrete phaseshift SSFBGs, code-reconfigurable gratings, and novel continuous phase-shift SSFBGs, have been investigated comparatively, as well as their performance in various optical coding/decoding systems. This thesis also discusses the possibility of reducing multiple access interference (MAI) using a Two-Photon Absorption (TPA) process. The advanced grating devices enable the improvement of system performance. A dynamically reconfigurable optical packet processing system and a 16-channel reconfigurable OCDMA/DWDM system with 50GHz DWDM intervals has been demonstrated.These results highlight the feasibility of FBG-based optical coding/decoding techniques, with improved system flexibility and sustainability
- …