MFPA: Mixed-Signal Field Programmable Array for Energy-Aware Compressive Signal Processing

Compressive Sensing (CS) is a signal processing technique which reduces the number of samples taken per frame to decrease energy, storage, and data transmission overheads, as well as reducing time taken for data acquisition in time-critical applications. The tradeoff in such an approach is increased complexity of signal reconstruction. While several algorithms have been developed for CS signal reconstruction, hardware implementation of these algorithms is still an area of active research. Prior work has sought to utilize parallelism available in reconstruction algorithms to minimize hardware overheads; however, such approaches are limited by the underlying limitations in CMOS technology. Herein, the MFPA (Mixed-signal Field Programmable Array) approach is presented as a hybrid spin-CMOS reconfigurable fabric specifically designed for implementation of CS data sampling and signal reconstruction. The resulting fabric consists of 1) slice-organized analog blocks providing amplifiers, transistors, capacitors, and Magnetic Tunnel Junctions (MTJs) which are configurable to achieving square/square root operations required for calculating vector norms, 2) digital functional blocks which feature 6-input clockless lookup tables for computation of matrix inverse, and 3) an MRAM-based nonvolatile crossbar array for carrying out low-energy matrix-vector multiplication operations. The various functional blocks are connected via a global interconnect and spin-based analog-to-digital converters. Simulation results demonstrate significant energy and area benefits compared to equivalent CMOS digital implementations for each of the functional blocks used: this includes an 80% reduction in energy and 97% reduction in transistor count for the nonvolatile crossbar array, 80% standby power reduction and 25% reduced area footprint for the clockless lookup tables, and roughly 97% reduction in transistor count for a multiplier built using components from the analog blocks. Moreover, the proposed fabric yields 77% energy reduction compared to CMOS when used to implement CS reconstruction, in addition to latency improvements

Non-volatile FPGA architecture using resistive switching devices

This dissertation reports the research work that was conducted to propose a non-volatile architecture for FPGA using resistive switching devices. This is achieved by designing a Configurable Memristive Logic Block (CMLB). The CMLB comprises of memristive logic cells (MLC) interconnected to each other using memristive switch matrices. In the MLC, novel memristive D flip-flop (MDFF), 6-bit non-volatile look-up table (NVLUT), and CMOS-based multiplexers are used. Other than the MDFF, a non-volatile D-latch (NVDL) was also designed. The MDFF and the NVDL are proposed to replace CMOS-based D flip-flops and D-latches to improve energy consumption. The CMLB shows a reduction of 8.6% of device area and 1.094 times lesser critical path delay against the SRAM-based FPGA architecture. Against similar CMOS-based circuits, the MDFF provides switching speed of 1.08 times faster; the NVLUT reduces power consumption by 6.25nW and improves device area by 128 transistors; while the memristive logic cells reduce overall device area by 60.416μm2. The NVLUT is constructed using novel 2TG1M memory cells, which has the fastest switching times of 12.14ns, compared to other similar memristive memory cells. This is due to the usage of transmission gates which improves voltage transfer from input to the memristor. The novel 2TG1M memory cell also has lower energy consumption than the CMOS-based 6T SRAM cell. The memristive-based switch matrices that interconnects the MLCs together comprises of novel 7T1M SRAM cells, which has the lowest energy-delay-area-product value of 1.61 among other memristive SRAM cells. Two memristive logic gates (MLG) were also designed (OR and AND), that introduces non-volatility into conventional logic gates. All the above circuits and design simulations were performed on an enhanced SPICE memristor model, which was improved from a previously published memristor model. The previously published memristor model was fault to not be in good agreement with memristor theory and the physical model of memristors. Therefore, the enhanced SPICE memristor model provides a memristor model which is in good agreement with the memristor theory and the physical model of memristors, which is used throughout this research work

Non-volatile FPGA architecture using resistive switching devices

This dissertation reports the research work that was conducted to propose a non-volatile architecture for FPGA using resistive switching devices. This is achieved by designing a Configurable Memristive Logic Block (CMLB). The CMLB comprises of memristive logic cells (MLC) interconnected to each other using memristive switch matrices. In the MLC, novel memristive D flip-flop (MDFF), 6-bit non-volatile look-up table (NVLUT), and CMOS-based multiplexers are used. Other than the MDFF, a non-volatile D-latch (NVDL) was also designed. The MDFF and the NVDL are proposed to replace CMOS-based D flip-flops and D-latches to improve energy consumption. The CMLB shows a reduction of 8.6% of device area and 1.094 times lesser critical path delay against the SRAM-based FPGA architecture. Against similar CMOS-based circuits, the MDFF provides switching speed of 1.08 times faster; the NVLUT reduces power consumption by 6.25nW and improves device area by 128 transistors; while the memristive logic cells reduce overall device area by 60.416μm2. The NVLUT is constructed using novel 2TG1M memory cells, which has the fastest switching times of 12.14ns, compared to other similar memristive memory cells. This is due to the usage of transmission gates which improves voltage transfer from input to the memristor. The novel 2TG1M memory cell also has lower energy consumption than the CMOS-based 6T SRAM cell. The memristive-based switch matrices that interconnects the MLCs together comprises of novel 7T1M SRAM cells, which has the lowest energy-delay-area-product value of 1.61 among other memristive SRAM cells. Two memristive logic gates (MLG) were also designed (OR and AND), that introduces non-volatility into conventional logic gates. All the above circuits and design simulations were performed on an enhanced SPICE memristor model, which was improved from a previously published memristor model. The previously published memristor model was fault to not be in good agreement with memristor theory and the physical model of memristors. Therefore, the enhanced SPICE memristor model provides a memristor model which is in good agreement with the memristor theory and the physical model of memristors, which is used throughout this research work

Stochastic-Based Computing with Emerging Spin-Based Device Technologies

In this dissertation, analog and emerging device physics is explored to provide a technology platform to design new bio-inspired system and novel architecture. With CMOS approaching the nano-scaling, their physics limits in feature size. Therefore, their physical device characteristics will pose severe challenges to constructing robust digital circuitry. Unlike transistor defects due to fabrication imperfection, quantum-related switching uncertainties will seriously increase their susceptibility to noise, thus rendering the traditional thinking and logic design techniques inadequate. Therefore, the trend of current research objectives is to create a non-Boolean high-level computational model and map it directly to the unique operational properties of new, power efficient, nanoscale devices. The focus of this research is based on two-fold: 1) Investigation of the physical hysteresis switching behaviors of domain wall device. We analyze phenomenon of domain wall device and identify hysteresis behavior with current range. We proposed the Domain-Wall-Motion-based (DWM) NCL circuit that achieves approximately 30x and 8x improvements in energy efficiency and chip layout area, respectively, over its equivalent CMOS design, while maintaining similar delay performance for a one bit full adder. 2) Investigation of the physical stochastic switching behaviors of Mag- netic Tunnel Junction (MTJ) device. With analyzing of stochastic switching behaviors of MTJ, we proposed an innovative stochastic-based architecture for implementing artificial neural network (S-ANN) with both magnetic tunneling junction (MTJ) and domain wall motion (DWM) devices, which enables efficient computing at an ultra-low voltage. For a well-known pattern recognition task, our mixed-model HSPICE simulation results have shown that a 34-neuron S-ANN implementation, when compared with its deterministic-based ANN counterparts implemented with digital and analog CMOS circuits, achieves more than 1.5 ~ 2 orders of magnitude lower energy consumption and 2 ~ 2.5 orders of magnitude less hidden layer chip area