Designing of precomputational-based low-power Viterbi decoder

This work addresses the low-power VLSI implementation of the Viterbi decoder (VD). A new precomputational scheme applied to the trellis butterflies calculation is presented. The proposed scheme is implemented in a 16-state, rate 1/3 VD. Gate-level power verification indicates that the proposed design reduces the power dissipated by the original trellis butterflies calculation by 42%.published_or_final_versio

A Viterbi decoder with low-power trace-back memory structure for wireless pervasive communications

This paper presents a new trace-back memory structure for Viterbi decoders that reduces power consumption by 63% compared to the conventional RAM based design. Instead of the intensive read and write operations as required in RAM based designs, the new memory is based on an array of registers connected with trace-back signals that decode the output bits on the fly. The structure is used together with appropriate clock and power-aware control signals. Based on a 0.35 /spl mu/m CMOS implementation the trace-back back memory consumes energy of 182 pJ

A high-speed, low-power interleaved trace-back memory for Viterbi decoder

This paper presents a high-speed, low-power trace-back memory structure for a Viterbi decoder. The new memory is based on an array of registers connected with trace-back signals that decode the output bits on the fly. The trace-back memory is internally interleaved such that high-speed characteristic is achieved while low-power consumption is maintained. The structure is used together with appropriate clock and power-aware control signals. The design is 100% portable and is suitable for a SoftIP approach. Based on the AMS 0.35 /spl mu/m CMOS implementation the trace-back memory is estimated to consume energy of 232 pJ, which is 53.6% less than a conventional RAM based design, with a maximum throughput of 1.1 Gbps

Future transmitter/receiver diversity schemes in broadcast wireless networks

An open diversity architecture for a cooperating broadcast wireless network is presented that exploits the strengths of the existing digital broadcast standards. Different diversity techniques for broadcast networks that will minimize the complexity of broadcast systems and improve received SNR of broadcast signals are described. Resulting digital broadcast networks could require fewer transmitter sites and thus be more cost-effective with less environmental impact. Transmit diversity is particularly investigated since it obviates the major disadvantage of receive diversity being the difficulty of locating two receive antennas far enough apart in a small mobile device. The schemes examined here are compatible with existing broadcast and cellular telecom standards and can be incorporated into existing systems without change

逐次干渉除去を用いた多元接続システムのパワー割り当てに関する研究

In future wireless communication networks, the number of devices is likely to increase dramatically due to potential development of new applications such as the Internet of Things (IoT). Consequently, radio access network is required to support multiple access of massive users and achieve high spectral efficiency. From the information theoretic perspective, orthogonal multiple access protocols are suboptimal. To achieve the multiple access capacity, non-orthogonal multiple access protocols and multiuser detection (MUD) are required. For the non-orthogonal code-division multiple access (CDMA), several MUD techniques have been proposed to improve the spectrum efficiency. Successive interference cancellation (SIC) is a promising MUD techniques due to its low complexity and good decoding performance. Random access protocols are designed for the system with bursty traffic to reduce the delay, compared to the channelized multiple access. Since the users contend for the channel instead of being assigned by the base station (BS), collisions happen with a certain probability. If the traffic load becomes relatively high, the throughput of these schemes steeply falls down because of collisions. However, it has been well-recognized that more complex procedures can permit decoding of interfering signals, which is referred to as multi-packet reception (MPR). Also, an SIC decoder might decode more packets by successively subtracting the correctly decoded packets from the collision. Cognitive radio (CR) is an emerging technology to solve the problem of spectrum scarcity by dynamically sharing the spectrum. In the CR networks, the secondary users (SUs) are allowed to dynamically share the frequency bands with primary users (PUs) under primary quality-of-service (QoS) protection such as the constraint of interference temperature at the primary base station (PBS). For the uplink multiple access to the secondary base station (SBS), transmit power allocation for the SUs is critical to control the interference temperature at the PBS. Transmit power allocation has been extensively studied in various multiple access scenarios. The power allocation algorithms can be classified into two types, depending on whether the process is controlled by the base station (BS). For the centralized power allocation (CPA) algorithms, the BS allocates the transmit powers to the users through the downlink channels. For the random access protocols, there are also efforts on decentralized power allocation (DPA) that the users select transmit powers according to given distributions of power and probability, instead of being assigned the transmit power at each time slot by the BS. In this dissertation, the DPA algorithms for the random access protocols with SIC are investigated and new methods are proposed. First a decentralized multilevel power allocation algorithm to improve the MAC throughput performance is proposed, for the general SIC receiver that can decode multiple packets from one collision. Then an improved DPA algorithm to maximize the overall system sum rate is proposed, taking into account of both the MAC layer and PHY layer. Finally, a DPA algorithm for the CR secondary random access is proposed, considering the constraint of interference temperature and the practical assumption of imperfect cancellation. An opportunistic transmission protocol for the fading environment to further reduce the interference temperature is also proposed. For the future work, the optimal DPA for the random access with the SIC receiver is still an open problem. Besides, advanced multiple access schemes that aim to approach the multiple access capacity by combining the advantages of the network coded cooperation, the repetition slotted ALOHA, and the SIC receiver are also interesting.電気通信大学201

Journal of Telecommunications and Information Technology, 2003, nr 2

kwartalni

Advanced OFDM systems for terrestrial multimedia links

Recently, there has been considerable discussion about new wireless technologies and standards able to achieve high data rates. Due to the recent advances of digital signal processing and Very Large Scale Integration (VLSI) technologies, the initial obstacles encountered for the implementation of Orthogonal Frequency Division Multiplexing (OFDM) modulation schemes, such as massive complex multiplications and high speed memory accesses, do not exist anymore. OFDM offers strong multipath protection due to the insertion of the guard interval; in particular, the OFDM-based DVB-T standard had proved to offer excellent performance for the broadcasting of multimedia streams with bitrates over ten megabits per second in difficult terrestrial propagation channels, for fixed and portable applications. Nevertheless, for mobile scenarios, improving the receiver design is not enough to achieve error-free transmission especially in presence of deep shadow and multipath fading and some modifications of the standard can be envisaged. To address long and medium range applications like live mobile wireless television production, some further modifications are required to adapt the modulated bandwidth and fully exploit channels up to 24MHz wide. For these reasons, an extended OFDM system is proposed that offers variable bandwidth, improved protection to shadow and multipath fading and enhanced robustness thanks to the insertion of deep time-interleaving coupled with a powerful turbo codes concatenated error correction scheme. The system parameters and the receiver architecture have been described in C++ and verified with extensive simulations. In particular, the study of the receiver algorithms was aimed to achieve the optimal tradeoff between performances and complexity. Moreover, the modulation/demodulation chain has been implemented in VHDL and a prototype system has been manufactured. Ongoing field trials are demonstrating the ability of the proposed system to successfully overcome the impairments due to mobile terrestrial channels, like multipath and shadow fading. For short range applications, Time-Division Multiplexing (TDM) is an efficient way to share the radio resource between multiple terminals. The main modulation parameters for a TDM system are discussed and it is shown that the 802.16a TDM OFDM physical layer fulfills the application requirements; some practical examples are given. A pre-distortion method is proposed that exploit the reciprocity of the radio channel to perform a partial channel inversion achieving improved performances with no modifications of existing receivers

New Receivers for Differentially Encoded Offset-QPSK

Before a new mobile radio system will be standardised, an intense process of decision making is required concerning the different aspects of the system. One aspect is the definition of the air interface and in particular the employed modulation method. During the standardisation of the TETRA (Terrestrial Trunked Radio) system, the expert group decided to choose the linear modulation format π/4-QPSK. One important point for decision making was the requirement to support power efficient, nonlinear amplifiers. Although the second candidate, Offset-QPSK (OQPSK) shows further reduced envelope fluctuations, the nonavailibilty of a conventional differential demodulator for OQPSK led to a clear preference for π/4-QPSK. Differential demodulation is an at-tractive combined carrier phase estimation and demodulation technique on fast time selective fading channels. The work presented in the thesis is concerned with the synthesis and analysis of receiver algorithms for differentially encoded OQPSK signals, which fulfil the requirements of modern mobile radio systems. The thesis begins with an overview of the theoretical principles of digital modulation and optimum receivers. A description of mobile radio channels and the theoretical performance of PSK signals complete the basic chapter. A new receiver structure for DOQPSK using differential demodulation followed by a Viterbi decoder is then proposed. On this basis, an advanced algorithm suitable for general roll-off factors and with reduced complexity is derived and investigated. Following the differential demodulation, original algorithms for joint coherent demodulation and equalisation, which are based on the principle of per-survivor processing (PSP) are synthesised and discussed. These receiver structures are extended for the use in time and frequency selective mobile radio channels. With the aid of a computer simulation system the derived receiver structures are investigated. Simulation results on different linear and nonlinear channels are presented and compared with results obtained with standard π/4-DQPSK receivers and the theoretical bounds. The thesis concludes with a description of the simulation tool COSSAP and gives examples of created and implemented simulation models. The results of a fixed-point analysis of one model is presented and the possibilities to synthesise a hardware implementation is discussed

Optimisation of wireless communication system by exploitation of channel diversity

Communication systems are susceptible to degradation in performance because of interference received through their side lobes. The interference may be deliberate electronic counter measure (ECM), Accidental RF Interference (RFI) or natural noise. The growth of interference communication systems have given rise to different algorithms, Adaptive array techniques offer a possible solution to this problem of interference received through side lobes because of their automatic null steering in both spatial and frequency domains. Key requirement for space-time architecture is to use robust adaptive algorithms to ensure reliable operation of the smart antenna. Space division multiple access (SDMA) involves the use of adaptive nulling to allow two or more users (mobiles) in the same cell to share same frequency and time slot. One beam is formed for each user with nulls in the direction of other users. Different approaches have been used to identify the interferer from desired user. Thus a basic model for determining the angle of arrival of incoming signals, an appropriate antenna beam forming and adaptive algorithms are used for array processing. There is an insatiable demand for capacity in wireless data networks and cellular radio communication systems. However the RF environment that these systems operate in is harsh and severely limits the capacity of traditional digital wireless networks. With normal wireless systems this limits the data rate in cellular radio environments to approximately 200 kbps whereas much higher data rates in excess of 25Mbps are required. A common wireless channel problem is that of frequency selective multi-path fading. To combat this problem, new types of wireless interface are being developed which utilise space, time and frequency diversity to provide increasing resilience to the channel imperfections. At any instant in time, the channel conditions may be such that one or more of these diversity methods may offer a superior performance to the other diversity methods. The overall aim of the research is to develop new systems that use a novel combination of smart antenna MIMO techniques and an advanced communication system based on advanced system configuration that could be exploited by IEEE 802.20 user specification approach for broadband wireless networking. The new system combines the Multi-input Multi-output communication system with frequency diversity in the form of an OFDM modulator. The benefits of each approach are examined under similar channel conditions and results presented.EThOS - Electronic Theses Online ServiceGBUnited Kingdo