1,303 research outputs found
Power system applications of fiber optics
Power system applications of optical systems, primarily using fiber optics, are reviewed. The first section reviews fibers as components of communication systems. The second section deals with fiber sensors for power systems, reviewing the many ways light sources and fibers can be combined to make measurements. Methods of measuring electric field gradient are discussed. Optical data processing is the subject of the third section, which begins by reviewing some widely different examples and concludes by outlining some potential applications in power systems: fault location in transformers, optical switching for light fired thyristors and fault detection based on the inherent symmetry of most power apparatus. The fourth and final section is concerned with using optical fibers to transmit power to electric equipment in a high voltage situation, potentially replacing expensive high voltage low power transformers. JPL has designed small photodiodes specifically for this purpose, and fabricated and tested several samples. This work is described
Ultra Wideband
Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations
Recommended from our members
Silicon - polymer hybrid integrated microwave photonic devices for optical interconnects and electromagnetic wave detection
textThe accelerating increase in information traffic demands the expansion of optical access network systems that require high-performance optical and photonic components. In short-range communication links, optical interconnects have been widely accepted as a viable approach to solve the problems that copper based electrical interconnects have encountered in keeping up with the surge in the data rate demand over the last decades. Low cost, ease of fabrication, and integration capabilities of low optical-loss polymers make them attractive for integrated photonic applications to support futuristic data communication networks. In addition to passive wave-guiding components, electro-optic (EO) polymers consisting of a polymeric matrix doped with organic nonlinear chromophores have enabled wide-RF-bandwidth and low-power active photonic devices. Beside board level passive and active optical components, on-chip micro- or nano-photonic devices have been made possible by the hybrid integration of EO polymers onto the silicon platform. In recent years, silicon photonics have attracted a significant amount of attentions, because it offers compact device size and the potential of complementary metal–oxide–semiconductor (CMOS) compatible photonic integrated circuits. The combination of silicon photonics and EO polymers can enable miniaturized and high-performance hybrid integrated photonic devices, such as electro-optic modulators, optical interconnects, and microwave photonic sensors. Silicon photonic crystal waveguides (PCWs) exhibit slow-light effects which are beneficial for device miniaturization. Especially, EO polymer filled silicon slotted PCWs further reduce the device size and enhance the device performance by combining the best of these two systems. The potential applications of these silicon-polymer hybrid integrated devices include not only optical interconnects, but also optical sensing and microwave photonics. In this dissertation, the design, fabrication, and characterization of several types of silicon-polymer hybrid photonic devices will be presented, including EO polymer filled silicon PCW modulators for on-chip optical interconnects, antenna-coupled optical modulators for electromagnetic wave detections, and low-loss strip-to-slot PCW mode converters. In addition, some polymer-based devices and silicon-based photonic devices will also be presented, such as traveling wave electro-optic polymer modulators based on domain-inversion directional couplers, and silicon thermo-optic switches based on coupled photonic crystal microcavities. Furthermore, some microwave (or RF) components such as integrated broadband bowtie antennas for microwave photonic applications will be covered. Some on-going work or suggested future work will also be introduced, including in-device pyroelectric poling for EO polymer filled silicon slot PCWs, millimeter- or Terahertz-wave sensors based on EO polymer filled plasmonic slot waveguide, low-loss silicon-polymer hybrid slot photonic crystal waveguides fabricated by CMOS foundry, logic devices based on EO polymer microring resonators, and so on.Electrical and Computer Engineerin
System level design of a full-duplex wireless transceiver for brain-machine interfaces
We propose a new wireless communication architecture for implanted systems that simultaneously stimulates neurons and record neural responses. This architecture can support large numbers of electrodes (>500), providing 100 Mb/s for the downlink of stimulation signals, and gigabits per second for the uplink of neural recordings. We propose a full-duplex transceiver architecture that shares one antenna for both the ultrawideband (UWB) and the 2.45-GHz industrial, scientific, and medical band. A new pulse shaper is used for the gigabits per second uplink to simplify the transceiver design, while supporting several modulation formats with high data rates. To validate our system-level design for brain-machine interfaces, we present an ex-vivo experimental demonstration of the architecture. While the system design is for an integrated solution, the proof-of-concept demonstration uses discrete components. Good bit error rate performance over a biological channel at 0.5-, 1-, and 2-Gb/s data rates for uplink telemetry (UWB) and 100 Mb/s for downlink telemetry (2.45-GHz band) are achieved
Flexible, polarization-diverse UWB antennas for implantable neural recording systems
Implanted antennas for implant-to-air data communications must be composed of material compatible with biological tissues. We design single and dual-polarization antennas for wireless ultra-wideband neural recording systems using an inhomogeneous multi-layer model of the human head. Antennas made from flexible materials are more easily adapted to implantation; we investigate both flexible and rigid materials and examine performance trade-offs. The proposed antennas are designed to operate in a frequency range of 2-11 GHz (having S11 below -10 dB) covering both the 2.45 GHz (ISM) band and the 3.1-10.6 GHz UWB band. Measurements confirm simulation results showing flexible antennas have little performance degradation due to bending effects (in terms of impedance matching). Our miniaturized flexible antennas are 12 mm×12 mm and 10 mm×9 mm for single- and dual-polarizations, respectively. Finally, a comparison is made of four implantable antennas covering the 2-11 GHz range: 1) rigid, single polarization, 2) rigid, dual polarization, 3) flexible, single polarization and 4) flexible, dual polarization. In all cases a rigid antenna is used outside the body, with an appropriate polarization. Several advantages were confirmed for dual polarization antennas: 1) smaller size, 2) lower sensitivity to angular misalignments, and 3) higher fidelity
Laser Optical In-circuit Measurement System for Immunity Applications
During immunity testing (ESD, EFT) of a digital circuit, the waveforms of critical signal nets need to be measured for analyzing the failure mechanism. However, it is difficult to measure the induced voltage in the circuit under test due to the unwanted coupling by the non-ideal shielding of the probe cable, especially, if large common mode currents are present. Fiber optical connection avoids this problem. Semiconductor lasers have frequently been used for converting the voltage into an optical signal. The paper shows novel implementations of powering the laser, leading to a small, low cost optical probe
Recent Progress in Fiber Optic Antennas for EMC Measurement
Recent progress in electromagnetic compatibility (EMC) technology has created a need for small and wideband antennas that can be used to measure the quality of EMC measurement facilities and to measure electric field strength for immunity tests and human hazard studies. Antennas using fiber optics are being developed because this kind of antenna has the wideband property and can eliminate the influence of the coaxial cable. This paper first summarizes the development of fiber optic antennas for EMC measurement and the construction of practical fiber optic antennas. It then describes the recent progress that has been made in Japan. This progress includes the electromagnetic source and the electric field sensor using a spherical dipole antenna with O/E or E/O converters, and it includes a wideband electric field sensor using electro-optical crystals
- …