Performance Evaluation of Encrypted Text Message Transmission in 5G Compatible Orthogonal Multi-level Chaos Shift Keying Modulation Scheme Aided MIMO Wireless Communication System

- In this paper, a comprehensive performance evaluative study has been made on encrypted text message transmission in 5G compatible orthogonal multi-level chaos shift keying modulation scheme aided MIMO wireless communication system. The 4 X 4 multi-antenna supported simulated system incorporates four channel coding (1/2-rated Convolutional, (3, 2) SPC, LDP Cand Repeat and Accumulate (RA)), different signal detection (MMSE, ZF, Cholesky decomposition and Group Detection (GD) approach aided Efficient ZeroForcing (ZF)), and Chaotic Walsh-Hadamard encoding schemes

Hybrid clipping and companding techniques based peak to average power ratio reduction in orthogonal frequency division multiplexing based differential chaos shift keying system

In this paper, a hybrid approach using clipping and companding techniques is introduced to reduce the peak to average power ratio (PAPR) of orthogonal frequency division multiplexing based differential chaos shift keying (OFDM-DCSK), which is the major drawback of the OFDM-DCSK. The hybrid function is processed at the end of the transmitter before transmitting the signal. However, there is no need for an inverse function at the receiver, which decreases the system complexity. Several techniques have been proposed in the literature for decreasing the PAPR value. Clipping and companding are active methods in terms of reducing the PAPR. Finally, the PAPR reduction and bit error rate (BER) performances are evaluated. The simulation results show that this technique gives better performance as compared with the clipping and companding techniques

Design and analysis of a new index-modulation-aided DCSK system with frequency-and-time resources

We propose a new index-modulation-aided differential chaos shift keying (DCSK) system using frequency-and-time resources, referred to as CTIM-DCSK system, to achieve high-data-rate transmissions. In the proposed system, the orthogonal sinusoidal carriers are used to transmit both the reference-chaotic and the information-bearing signals. Moreover, the frequency-and-time resources are considered as indices to carry additional information bits. To simultaneously boost the bit error rate (BER) performance and reduce the system complexity, this paper proposes a new CTIM-DCSK signal based on the frequency-and-time resources, in which the time slots used by the selected subcarriers convey the same index bits. We employ a noise-reduction method at the receiver to further improve the BER performance of the proposed CTIM-DCSK system. We also derive the theoretical BER expressions of the CTIM-DCSK system over two different channels, i.e., additive white Gaussian noise (AWGN) channel and multipath Rayleigh fading channel. We analyze the data rate, complexity and spectral efficiency of the CTIM-DCSK system in comparison with the state-of-the-art counterparts. Analytical and simulation results verify the accuracy of the theoretical analysis and the advantage of the proposed CTIM-DCSK system. Consequently, the proposed CTIM-DCSK system appears to be a competitive candidate for low-complexity Internet-of-Things applications

Advanced index modulation techniques for future wireless networks

In the research study proposed in this Ph.D Thesis, we consider Index Modulation as a novel tool to enhance energy and spectral efficiencies for upcoming 5G networks, including wireless sensor networks and internet of things. In this vein, spatial modulation was proposed to enhance the capacity of wireless systems to partially achieve the capacity of MIMO systems but at lower cost, making it a technique that has attracted significant attention over the past few years. As such, SM schemes have been regarded as possible candidates for spectrum- and energy-efficient next generation MIMO systems. However, the implementation of the SM is also challenging because of its heavy dependence on channel characteristics, channel correlation, corrupted CSI and the need to have adequate spacing between antennas. Moreover, the SM requires multiple antennas at the transmitter which adds cost to the hardware implementation. In addition, the number of mapped bits in SM is limited by the physical size of the wireless device where only small number of antennas can be used. The switching time wasted by RF antenna switches adds to the complexity of the issue. In this Thesis, we study the drawbacks of SM in the articles indicated, namely Performance Comparison of Spatial Modulation Detectors Under Channel Impairments that is placed in the Appendix at the end of Thesis as it is a conference paper, and The Impact of Antenna Switching Time on Spatial Modulation that is put in Chapter 1. In the first article, we have shown that channel impairments have serious impacts on the BER performance and on the capacity of the SM system and that the SM is too sensitive to both imperfect and correlated channels. In the second article, we have demonstrated that the switching time defined as the time needed by the system to turn off an antenna and turn on another one, which is an inherent property of RF industrial switches used in SM systems, is in the order of nanoseconds and naturally influences the transmission rate of SM systems because of introducing systematic transmission gaps or pauses. Given the speed limitation of practical RF switches in performing transitions, antenna transition-based technologies like SM schemes are capped in terms of data rate performance. In fact, the effective data rate of SM will remain hostage to developments in industrial RF switches. This brings restrictions to the implementation and operation issues when extremely high data rates become a necessity. It is shown by the assemblage of our results that the switching time Tsw which is a requirement for transitions between antennas to happen, dictates restrictions on data rate, capacity and spectral efficiency of SM systems. Furthermore, we propose baseband non-hardware-based indexing modulation schemes based on frequency-index modulation, coherent chaotic modulation and non-coherent differential chaotic modulation schemes as potential alternatives to SM, that would also fit wireless sensor networks and internet of things applications. In this regard, we have proposed three articles. The first article which represents frequency index modulation is called Frequency Index Modulation for Low Complexity Low Energy Communication Networks and is placed in Chapter 2 of this Thesis. In this article, we explore a low complexity multi-user communication system based on frequency index modulation that suits Internet of Things (IoT) applications and we show that such a system would constitute an excellent candidate for wireless sensor applications, where it represents a simpler substitution for frequency-hopping (FH) based architectures, in which the hops carry extra bits. The third article which concerns coherent chaotic modulation is called Design of an Initial-Condition Index Chaos Shift Keying Modulation and is located in Chapter 3. In this article, an initial condition index chaos shift keying modulation is proposed. This design aims to increase the spectral and energy efficiencies to unprecedented levels. The proposed scheme exploits the initial conditions to generate different chaotic sequences to convey extra bits per transmission. In comparison to rival modulation schemes, the results obtained in the proposed work show a promising data rate boost and a competitive performance. The last article employs a non-coherent differential chaotic shift-key system named Permutation Index DCSK Modulation Technique for Secure Multi-User High-Data-Rate Communication Systems that is found in the Appendix. In this original design, where each data frame is divided into two time slots in which the reference chaotic signal is sent in the first time slot and a permuted replica of the reference signal multiplied by the modulating bit is sent in the second time slot, we target enhancing data security, energy and spectral efficiencies. Overall, in light of the high demands for bandwidth and energy efficiencies of futuristic systems, the suggested soft indexing mechanisms are successful candidates with promising results

Green Cell-less Design for RF-Wireless Power Transfer Networks

This paper studies a new concept so-called green cell-less radio frequency (RF) wireless power transfer (WPT) networks. We consider a scenario in which multiple indoor access points (APs) equipped with outdoor energy harvesters are connected with a central control unit via backhaul links. Further, such APs exploit the harnessed green energy to recharge wirelessly indoor devices under the coordination of the control unit. Considering the network, we focus on AP selection and beamforming optimization to maximize the total energy harvesting (EH) rate. The resulting mathematical problem has the form of mixed-integer optimization that is intractable to solve. Thus, we propose an algorithm to tackle this difficulty. Through numerical results, we show the advantages of the cell-less design over the conventional small-cell one to validate our ideas. In particular, the issue on safety requirements of human exposure to RF radiation is discussed. Finally, potential future research is provided.Comment: 7 pages, 8 figures, accepted for publication in IEEE Wireless Communications and Networking Conference, 15-18 April 2018, Barcelona, Spai