An Energy-Efficient Design Paradigm for a Memory Cell Based on Novel Nanoelectromechanical Switches

In this chapter, we explain NEMsCAM cell, a new content-addressable memory (CAM) cell, which is designed based on both CMOS technologies and nanoelectromechanical (NEM) switches. The memory part of NEMsCAM is designed with two complementary nonvolatile NEM switches and located on top of the CMOS-based comparison component. As a use case, we evaluate first-level instruction and data translation lookaside buffers (TLBs) with 16 nm CMOS technology at 2 GHz. The simulation results demonstrate that the NEMsCAM TLB reduces the energy consumption per search operation (by 27%), standby mode (by 53.9%), write operation (by 41.9%), and the area (by 40.5%) compared to a CMOS-only TLB with minimal performance overhead

NEMsCAM: A novel CAM cell based on nano-electro-mechanical switch and CMOS for energy efficient TLBs

In this paper we propose a novel Content Addressable Memory (CAM) cell, NEMsCAM, based on both Nano-electro-mechanical (NEM) switches and CMOS technologies. The memory component of the proposed CAM cell is designed with two complementary non-volatile NEM switches and located on top of the CMOS-based comparison component. As a use case for the NEMsCAM cell, we design first-level data and instruction Translation Lookaside Buffers (TLBs) with 16nm CMOS technology at 2GHz. The simulations show that the NEMsCAM TLB reduces the energy consumption per search operation (by 27%), write operation (by 41.9%) and standby mode (by 53.9%), and the area (by 40.5%) compared to a CMOS-only TLB with minimal performance overhead.We thank all anonymous reviewers for their insightful comments. This work is supported in part by the European Union (FEDER funds) under contract TIN2012-34557, and the European Union’s Seventh Framework Programme (FP7/2007-2013) under the ParaDIME project (GA no. 318693)Postprint (author's final draft

Multiple-valued logic: technology and circuit implementation

Title from PDF of title page, viewed March 1, 2023Dissertation advisors: Masud H. Chowdhury and Yugyung LeeVitaIncludes bibliographical references (pages 91-107)Dissertation (Ph.D.)--Department of Computer Science and Electrical Engineering. University of Missouri--Kansas City, 2021Computing technologies are currently based on the binary logic/number system, which is dependent on the simple on and off switching mechanism of the prevailing transistors. With the exponential increase of data processing and storage needs, there is a strong push to move to a higher radix logic/number system that can eradicate or lessen many limitations of the binary system. Anticipated saturation of Moore's law and the necessity to increase information density and processing speed in the future micro and nanoelectronic circuits and systems provide a strong background and motivation for the beyond-binary logic system. During this project, different technologies for Multiple-Valued-Logic (MVL) devices and the associated prospects and constraints are discussed. The feasibility of the MVL system in real-world applications rests on resolving two major challenges: (i) development of an efficient mathematical approach to implement the MVL logic using available technologies and (ii) availability of effective synthesis techniques. The main part of this project can be divided into two categories: (i) proposing different novel and efficient design for various logic and arithmetic circuits such as inverter, NAND, NOR, adder, multiplexer etc. (ii) proposing different fast and efficient design for various sequential and memory circuits. For the operation of the device, two of the very promising emerging technologies are used: Graphene Nanoribbon Field Effect Transistor (GNRFET) and Carbon Nano Tube Field Effect Transistor (CNTFET). A comparative analysis of the proposed designs and several state-of-the-art designs are also given in all the cases in terms of delay, total power, and power-delay-product (PDP). The simulation and analysis are performed using the H-SPICE tool with a GNRFET model available on the Nanohub website and CNTFET model available from Standford University website.Introduction -- Fundamentals and scope of multiple valued logic -- Technological aspect of multiple valued logic circuit -- Ternary logic gates using Graphene Nano Ribbon Field Effect Transistor (GNRFET) -- Ternary arithmetic circuits using Graphene Nano Ribbon Field Effect Transistor (GNRFET) -- Ternary sequential circuits using Graphene Nano Ribbon Field Effect Transistor (GNRFET) -- Ternary memory circuits using Carbon Nano Tube Field Effect Transistor (CNTFET) -- Conclusions & future wor

Accelerate & Actualize: Can 2D Materials Bridge the Gap Between Neuromorphic Hardware and the Human Brain?

Two-dimensional (2D) materials present an exciting opportunity for devices and systems beyond the von Neumann computing architecture paradigm due to their diversity of electronic structure, physical properties, and atomically-thin, van der Waals structures that enable ease of integration with conventional electronic materials and silicon-based hardware. All major classes of non-volatile memory (NVM) devices have been demonstrated using 2D materials, including their operation as synaptic devices for applications in neuromorphic computing hardware. Their atomically-thin structure, superior physical properties, i.e., mechanical strength, electrical and thermal conductivity, as well as gate-tunable electronic properties provide performance advantages and novel functionality in NVM devices and systems. However, device performance and variability as compared to incumbent materials and technology remain major concerns for real applications. Ultimately, the progress of 2D materials as a novel class of electronic materials and specifically their application in the area of neuromorphic electronics will depend on their scalable synthesis in thin-film form with desired crystal quality, defect density, and phase purity.Comment: Neuromorphic Computing, 2D Materials, Heterostructures, Emerging Memory Devices, Resistive, Phase-Change, Ferroelectric, Ferromagnetic, Crossbar Array, Machine Learning, Deep Learning, Spiking Neural Network

Investigation of Multiple-valued Logic Technologies for Beyond-binary Era

Computing technologies are currently based on the binary logic/number system, which is dependent on the simple on and off switching mechanism of the prevailing transistors. With the exponential increase of data processing and storage needs, there is a strong push to move to a higher radix logic/number system that can eradicate or lessen many limitations of the binary system. Anticipated saturation of Moore’s law and the necessity to increase information density and processing speed in the future micro and nanoelectronic circuits and systems provide a strong background and motivation for the beyond-binary logic system. In this review article, different technologies for Multiple-valued-Logic (MVL) devices and the associated prospects and constraints are discussed. The feasibility of the MVL system in real-world applications rests on resolving two major challenges: (i) development of an efficient mathematical approach to implement the MVL logic using available technologies, and (ii) availability of effective synthesis techniques. This review of different technologies for the MVL system is intended to perform a comprehensive investigation of various MVL technologies and a comparative analysis of the feasible approaches to implement MVL devices, especially ternary logic

Ultra-low power logic in memory with commercial grade memristors and FPGA-based smart-IMPLY architecture

Reducing power consumption in nowadays computer technologies represents an increasingly difficult challenge. Conventional computing architectures suffer from the so-called von Neumann bottleneck (VNB), which consists in the continuous need to exchange data and instructions between the memory and the processing unit, leading to significant and apparently unavoidable power consumption. Even the hardware typically employed to run Artificial Intelligence (AI) algorithms, such as Deep Neural Networks (DNN), suffers from this limitation. A change of paradigm is so needed to comply with the ever-increasing demand for ultra-low power, autonomous, and intelligent systems. From this perspective, emerging memristive non-volatile memories are considered a good candidate to lead this technological transition toward the next-generation hardware platforms, enabling the possibility to store and process information in the same place, therefore bypassing the VNB. To evaluate the state of current public-available devices, in this work commercial-grade packaged Self Directed Channel memristors are thoroughly studied to evaluate their performance in the framework of in-memory computing. Specifically, the operating conditions allowing both analog update of the synaptic weight and stable binary switching are identified, along with the associated issues. To this purpose, a dedicated yet prototypical system based on an FPGA control platform is designed and realized. Then, it is exploited to fully characterize the performance in terms of power consumption of an innovative Smart IMPLY (SIMPLY) Logic-in-Memory (LiM) computing framework that allows reliable in-memory computation of classical Boolean operations. The projection of these results to the nanoseconds regime leads to an estimation of the real potential of this computing paradigm. Although not investigated in this work, the presented platform can also be exploited to test memristor-based SNN and Binarized DNNs (i.e., BNN), that can be combined with LiM to provide the heterogeneous flexible architecture envisioned as the long-term goal for ubiquitous and pervasive AI

n-Alkyl Methacrylate Polymeric Memristors for Synaptic Response Modeling: Organic and Biologically Relevant Thin Films

There is a strong interest in organic materials for electrical devices due to several advantages that organic systems have over their inorganic counterparts including ease of processability and lower toxicity. Many of these organic materials can be utilized in the creation of thin-film devices that can be formed in high-throughput processes and with a very small profile. One such device that has emerged in recent years is the memristor which can be used in new computational concept or as a synaptic model. This work studies the alternating current (AC) and direct current (DC) electrical response of a number n-alkyl methacrylate polymers with a charge transporting pendant carbazole ring. The electrical properties of the polymers were studied as a function of n-alkyl length with n ranging from 2 to 11. The DC current (I)-voltage (V) response of the polymers was characterized by an erratic and bistable response, while their AC I-V response was a pinched hysteresis loop when measured between 1-100 Hz. For polymers with n \u3c 9, their pinched hysteresis loop is characterized by jump transitions indicative of bistability, while polymers with n ≥ 9 had a pinched hysteresis loop that is smooth in appearance. Dielectric spectroscopy on the polymers indicates that as the n-alkyl length is increased, the rotation flexibility of the carbazole moiety is enhanced. The n-alkyl methacrylate polymers with a pendant carbazole ring spaced n ≥ 9 exhibited a lower activation energy and temperature for the onset of ring motion and resulted in polymer-based memristors that exhibit electrical characteristics, such as incrementally adjustable conductivity, that are potential candidates for mimicking synaptic plasticity. Further characterization was done on similar methacrylate systems with oxygen-substituted side chains and the addition of bulky phenyl groups to the carbazole moieties. From this work, the most promising candidate for synaptic modeling behavior was taken and further examined. It was shown that this polymer could be pulsed through a multitude of conductivity states and demonstrated behavior consistent with the Hebbian Learning Rule upon the application of pre- and post-synaptic pulses. The system was further characterized for the effects of different spike rates and voltages before being utilized in a flexible device. Other thin-film devices as well as novel processing methods were also demonstrated in this work including a biologically based reserve battery and a printed diode utilizing pentacene. The battery utilized standard alkaline chemistry where the zinc and manganese oxide electrodes are formed using stencil printing. Fish eggs are used to sequester the electrolyte out of the system until the application of force to the device. This application of force bursts the fish eggs and allows the battery to function by introducing the electrolyte into the system. A printed diode is also demonstrated through the use of a miniemulsion process that allows for the dispersion of the material into aqueous solution. This pentacene emulsion in water can then be used as the basis for the formation of diodes in a variety of fabrication processes

Techniques of Energy-Efficient VLSI Chip Design for High-Performance Computing

How to implement quality computing with the limited power budget is the key factor to move very large scale integration (VLSI) chip design forward. This work introduces various techniques of low power VLSI design used for state of art computing. From the viewpoint of power supply, conventional in-chip voltage regulators based on analog blocks bring the large overhead of both power and area to computational chips. Motivated by this, a digital based switchable pin method to dynamically regulate power at low circuit cost has been proposed to make computing to be executed with a stable voltage supply. For one of the widely used and time consuming arithmetic units, multiplier, its operation in logarithmic domain shows an advantageous performance compared to that in binary domain considering computation latency, power and area. However, the introduced conversion error reduces the reliability of the following computation (e.g. multiplication and division.). In this work, a fast calibration method suppressing the conversion error and its VLSI implementation are proposed. The proposed logarithmic converter can be supplied by dc power to achieve fast conversion and clocked power to reduce the power dissipated during conversion. Going out of traditional computation methods and widely used static logic, neuron-like cell is also studied in this work. Using multiple input floating gate (MIFG) metal-oxide semiconductor field-effect transistor (MOSFET) based logic, a 32-bit, 16-operation arithmetic logic unit (ALU) with zipped decoding and a feedback loop is designed. The proposed ALU can reduce the switching power and has a strong driven-in capability due to coupling capacitors compared to static logic based ALU. Besides, recent neural computations bring serious challenges to digital VLSI implementation due to overload matrix multiplications and non-linear functions. An analog VLSI design which is compatible to external digital environment is proposed for the network of long short-term memory (LSTM). The entire analog based network computes much faster and has higher energy efficiency than the digital one