Design of near-perfect-reconstructed transmultiplexer using different modulation techniques: A comparative study

AbstractIn this paper, an efficient iterative method for design of near-perfect reconstructed transmultiplexer (NPR TMUX) is proposed for the prescribed roll-off factor (RF) and stop band attenuation (As). In this method, windowing technique has been used for the design of prototype filter, and different modulation techniques have been exploited for designing multi-channel transmultiplexer (TMUX). In this method, inter-channel interference (ICI) is iteratively minimized so that it approximately reduces to ideal value zero. Design example is given to illustrate the superiority of the proposed method over earlier reported work. A comparative study of the performance of different modulation techniques for designing TMUX is also presented

(SI10-068) Performance Analysis of Cosine Window Function

This paper reviews the mathematical functions called the window functions which are employed in the Finite Impulse Response (FIR) filter design applications as well as spectral analysis for the detection of weak signals. The characteristic properties of the window functions are analyzed and parameters are compared among the known conventional cosine window (CW) functions (Rectangular, Hamming, Hanning, and Blackman) and the variable Kaiser window function. The window function expressed in the time domain can be transformed into the frequency domain by taking the Discrete Fourier Transform (DFT) of the time domain window function. The frequency response of the window function so obtained has main lobe, side lobes, and roll-off rate of side lobes. The main lobe width (MLW) expressed in 3dB bandwidth (BW), highest side lobe level (HSLL), and side lobe roll-off rate (SLROR) of the conventional window function and variable Kaiser window is then evaluated from the frequency response and compared to find out the appropriate window for employed applications

A Generalized Window Approach for Designing Transmultiplexers

This paper proposes a computational, very efficient, approach for designing a novel family of M-channel maximally decimated nearly perfect-reconstruction cosine-modulated transmultiplexers. This approach is referred to as the generalized windowing method for transmultiplexers because after knowing the transmission channel a proper weighted sum of the inter-channel and inter-symbol interferences can be properly taken into account in the optimization of the window function, unlike in other existing windowing techniques. The proposed approach has also the following two advantages. First, independent of the number of subchannels and the common order of the subchannel filters, the number of unknowns is only four. Second, the overall optimization procedure is made considerably fast by estimating the above-mentioned sum in terms of two novel measures, namely, the signal to inter-symbol and the signal to inter-channel interferences, which are very easy to evaluate. Furthermore, when the transmission channel is not considered in the design, a table is provided, which contains the parameters for designing the prototype filter directly by using the windowing method without any time-consuming optimization. When comparing the resulting transmultiplexers with the corresponding perfect-reconstruction designs (the same number of subchannels and same prototype filter order), the levels of interferences are practically the same. However, when the system is affected by a strong narrowband interference, the proposed transmultiplexers outperform their PR counterparts. Design examples are included illustrating the efficiency of the proposed design approach over other existing techniques based on the use of the windowing method

Waveform Design for 5G and beyond Systems

5G traffic has very diverse requirements with respect to data rate, delay, and reliability. The concept of using multiple OFDM numerologies adopted in the 5G NR standard will likely meet these multiple requirements to some extent. However, the traffic is radically accruing different characteristics and requirements when compared with the initial stage of 5G, which focused mainly on high-speed multimedia data applications. For instance, applications such as vehicular communications and robotics control require a highly reliable and ultra-low delay. In addition, various emerging M2M applications have sparse traffic with a small amount of data to be delivered. The state-of-the-art OFDM technique has some limitations when addressing the aforementioned requirements at the same time. Meanwhile, numerous waveform alternatives, such as FBMC, GFDM, and UFMC, have been explored. They also have their own pros and cons due to their intrinsic waveform properties. Hence, it is the opportune moment to come up with modification/variations/combinations to the aforementioned techniques or a new waveform design for 5G systems and beyond. The aim of this Special Issue is to provide the latest research and advances in the field of waveform design for 5G systems and beyond

Unified Theory for Biorthogonal Modulated Filter Banks

Modulated filter banks (MFBs) are practical signal decomposition tools for M -channel multirate systems. They combine high subfilter selectivity with efficient realization based on polyphase filters and block transforms. Consequently, the O(M 2 ) burden of computations in a general filter bank (FB) is reduced to O(M log2 M ) - the latter being a complexity order comparable with the FFT-like transforms.Often hiding from the plain sight, these versatile digital signal processing tools have important role in various professional and everyday life applications of information and communications technology, including audiovisual communications and media storage (e.g., audio codecs for low-energy music playback in portable devices, as well as communication waveform processing and channelization). The algorithmic efficiency implies low cost, small size, and extended battery life, bringing the devices close to our skins.The main objective of this thesis is to formulate a generalized and unified approach to the MFBs, which includes, in addition to the deep theoretical background behind these banks, both their design by using appropriate optimization techniques and efficient algorithmic realizations. The FBs discussed in this thesis are discrete-time time-frequency decomposition/reconstruction, or equivalently, analysis-synthesis systems, where the subfilters are generated through modulation from either a single or two prototype filters. The perfect reconstruction (PR) property is a particularly important characteristics of the MFBs and this is the core theme of this thesis. In the presented biorthogonal arbitrary-delay exponentially modulated filter bank (EMFB), the PR property can be maintained also for complex-valued signals.The EMFB concept is quite flexible, since it may respond to the various requirements given to a subband processing system: low-delay PR prototype design, subfilters having symmetric impulse responses, efficient algorithms, and the definition covers odd and even-stacked cosine-modulated FBs as special cases. Oversampling schemes for the subsignals prove out to be advantageous in subband processing problems requiring phase information about the localized frequency components. In addition, the MFBs have strong connections with the lapped transform (LT) theory, especially with the class of LTs grounded in parametric window functions.<br/

Generalized Fast-Convolution-based Filtered-OFDM: Techniques and Application to 5G New Radio

This paper proposes a generalized model and methods for fast-convolution (FC)-based waveform generation and processing with specific applications to fifth generation new radio (5G-NR). Following the progress of 5G-NR standardization in 3rd generation partnership project (3GPP), the main focus is on subband-filtered cyclic prefix (CP) orthogonal frequency-division multiplexing (OFDM) processing with specific emphasis on spectrally well localized transmitter processing. Subband filtering is able to suppress the interference leakage between adjacent subbands, thus supporting different numerologies for so-called bandwidth parts as well as asynchronous multiple access. The proposed generalized FC scheme effectively combines overlapped block processing with time- and frequency-domain windowing to provide highly selective subband filtering with very low intrinsic interference level. Jointly optimized multi-window designs with different allocation sizes and design parameters are compared in terms of interference levels and implementation complexity. The proposed methods are shown to clearly outperform the existing state-of-the-art windowing and filtering-based methods.Comment: To appear in IEEE Transactions on Signal Processin

Waveform Design for 5G and Beyond

5G is envisioned to improve major key performance indicators (KPIs), such as peak data rate, spectral efficiency, power consumption, complexity, connection density, latency, and mobility. This chapter aims to provide a complete picture of the ongoing 5G waveform discussions and overviews the major candidates. It provides a brief description of the waveform and reveals the 5G use cases and waveform design requirements. The chapter presents the main features of cyclic prefix-orthogonal frequency-division multiplexing (CP-OFDM) that is deployed in 4G LTE systems. CP-OFDM is the baseline of the 5G waveform discussions since the performance of a new waveform is usually compared with it. The chapter examines the essential characteristics of the major waveform candidates along with the related advantages and disadvantages. It summarizes and compares the key features of different waveforms.Comment: 22 pages, 21 figures, 2 tables; accepted version (The URL for the final version: https://onlinelibrary.wiley.com/doi/abs/10.1002/9781119333142.ch2

Efficient Fast-Convolution-Based Waveform Processing for 5G Physical Layer

This paper investigates the application of fast-convolution (FC) filtering schemes for flexible and effective waveform generation and processing in the fifth generation (5G) systems. FC-based filtering is presented as a generic multimode waveform processing engine while, following the progress of 5G new radio standardization in the Third-Generation Partnership Project, the main focus is on efficient generation and processing of subband-filtered cyclic prefix orthogonal frequency-division multiplexing (CP-OFDM) signals. First, a matrix model for analyzing FC filter processing responses is presented and used for designing optimized multiplexing of filtered groups of CP-OFDM physical resource blocks (PRBs) in a spectrally well-localized manner, i.e., with narrow guardbands. Subband filtering is able to suppress interference leakage between adjacent subbands, thus supporting independent waveform parametrization and different numerologies for different groups of PRBs, as well as asynchronous multiuser operation in uplink. These are central ingredients in the 5G waveform developments, particularly at sub-6-GHz bands. The FC filter optimization criterion is passband error vector magnitude minimization subject to a given subband band-limitation constraint. Optimized designs with different guardband widths, PRB group sizes, and essential design parameters are compared in terms of interference levels and implementation complexity. Finally, extensive coded 5G radio link simulation results are presented to compare the proposed approach with other subband-filtered CP-OFDM schemes and time-domain windowing methods, considering cases with different numerologies or asynchronous transmissions in adjacent subbands. Also the feasibility of using independent transmitter and receiver processing for CP-OFDM spectrum control is demonstrated