Piezo-electromechanical smart materials with distributed arrays of piezoelectric transducers: Current and upcoming applications

This review paper intends to gather and organize a series of works which discuss the possibility of exploiting the mechanical properties of distributed arrays of piezoelectric transducers. The concept can be described as follows: on every structural member one can uniformly distribute an array of piezoelectric transducers whose electric terminals are to be connected to a suitably optimized electric waveguide. If the aim of such a modification is identified to be the suppression of mechanical vibrations then the optimal electric waveguide is identified to be the 'electric analog' of the considered structural member. The obtained electromechanical systems were called PEM (PiezoElectroMechanical) structures. The authors especially focus on the role played by Lagrange methods in the design of these analog circuits and in the study of PEM structures and we suggest some possible research developments in the conception of new devices, in their study and in their technological application. Other potential uses of PEMs, such as Structural Health Monitoring and Energy Harvesting, are described as well. PEM structures can be regarded as a particular kind of smart materials, i.e. materials especially designed and engineered to show a specific andwell-defined response to external excitations: for this reason, the authors try to find connection between PEM beams and plates and some micromorphic materials whose properties as carriers of waves have been studied recently. Finally, this paper aims to establish some links among some concepts which are used in different cultural groups, as smart structure, metamaterial and functional structural modifications, showing how appropriate would be to avoid the use of different names for similar concepts. © 2015 - IOS Press and the authors

Optimal Placement of Collocated Sensors and Actuators in FRP Composites Substrate

In this thesis, Multi-Objective method is used for optimal placement of Collocated Sensors and Actuator, using integrated Genetic Algorithm. Optimal placement of piezoelectric sensors and actuators in a cantilever beam is found out by maximizing the controllability index and also observability index. First mode vibration is only considered for the present case. Finite element formulation for shell structure was used for the beam analysis by making the radius infinite, which results to the formulation for plate analysis. The cantilever beam was divided into twenty equal sections, where the piezoelectric material can be placed. In the present study four sensors and four actuators has been considered for collocated system. For non-collocated system four sensors was only considered. Results obtained from the work shows that the location for placement of piezoelectric material for non-collocated system is same as that obtained from multi-objective collocated system. Hence it can be deduced, it is not needed to find out the location for sensors and actuators separately rather controllability index for both can be found out together by using multi-objective collocated formulation

Contactless measurement of electric current using magnetic sensors

We review recent advances in magnetic sensors for DC/AC current transducers, especially novel AMR sensors and integrated fluxgates, and we make critical comparison of their properties. Most contactless electric current transducers use magnetic cores to concentrate the flux generated by the measured current and to shield the sensor against external magnetic fields. In order to achieve this, the magnetic core should be massive. We present coreless current transducers which are lightweight, linear and free of hysteresis and remanence. We also show how to suppress their weak point: crosstalk from external currents and magnetic fields

Multi-axial strain monitoring of fibre reinforced thermosetting plastics using embedded highly birefringent optical fibre Bragg sensors

There is a growing interest in the use of fibre reinforced plastics (FRPs) as high-grade construction material for variouw applications that need to be lightweight, yet strong in sometimes harsh loading conditions. Despite the growing popularity of structural composite materials, one has to realize that their mechanical behaviour is significantly different compared to conventional isotropic construction materials. Strain monitoring of an in-service structure should greatly enhance the insight and confidence in the (long-term) behaviour of high performance composite structures. Structural health monitoring necessitates the possibility of measuring multi-axials strain fields. High birefringent optical fibres (HiBi-fibres) with Bragg grating can become a solution in this matter. Designing a multi-axial strain sensor based on optical FBGs should meet several basic requirements which are discussed in this dissertation