1,529 research outputs found
A Multifunctional Integrated Circuit Router for Body Area Network Wearable Systems
A multifunctional router IC to be included in the nodes of a wearable body sensor network is described and evaluated. The router targets different application scenarios, especially those including tens of sensors, embedded into textile materials and with high data-rate communication demands. The router IC supports two different functionality sets, one for sensor nodes and another for the base node, both based on the same circuit module. The nodes are connected to each other by means of woven thick conductive yarns forming a mesh topology with the base node at the center. From the standpoint of the network, each sensor node is a four port router capable of handling packets from destination nodes to the base node, with sufficient redundant paths. The adopted hybrid circuit and packet switching scheme significantly improve network performance in terms of end-to-end delay, throughput and power consumption. The IC also implements a highly precise, sub-microsecond one-way time synchronization protocol which is used for time stamping the acquired data. The communication module was implemented in a 4-metal, 0.35 μm CMOS technology. The maximum data rate of the system is 35 Mbps while supporting up to 250 sensors, which exceeds current BAN applications scenarios.This work was supported in part
by the Fundação para a Ciéncia e a Tecnologia (FCT) (Portuguese Foundation
for Science and Technology) under Project PROLIMB PTDC/EEAELC/103683/2008 and through the Ph.D. Grant SFRH/BD/75324/2010,
and in part by the CREaTION, FCT/MEC through national funds and
co-funded by the FEDER-PT2020 partnership agreement under Project
UIDB/EEA/50008/2020, Project CONQUEST (CMU/ECE/030/2017),
Project COST CA15104, and ORCIP. (Corresponding author:
Fardin Derogarian Miyandoab.)info:eu-repo/semantics/publishedVersio
RF Energy Harvesting Wireless Networks: Challenges And Opportunities
Energy harvesting wireless networks is one of the most researched topics in this decade, both in industry and academia, as it can offer self-sustaining sensor networks. With RF energy harvesting (RF-EH) embedded, the sensors can operate for extended periods by harvesting energy from the environment or by receiving it as an Energy signal from a hybrid base station (HBS). Thus, providing sustainable solutions for managing massive numbers of sensor nodes. However, the biggest hurdle of RF energy is the low energy density due to spreading loss. This paper investigates the RF-EH node hardware and design essentials, performance matrices of RF-EH. Power management in energy harvesting nodes is discussed. Furthermore, an information criticality algorithm is proposed for critical and hazardous use cases. Finally, some of the RF-EH applications and the opportunities of 5G technologies for the RF-EH are introduced
RF Energy Harvesting Wireless Communication: RF Environment, Device Hardware and Practical Issues
Radio frequency (RF) based wireless power transfer provides an attractive solution to extend the lifetime of power-constrained wireless sensor networks. Through harvesting RF energy from surrounding environments or dedicated energy sources, low-power wireless devices can be self-sustaining and environment-friendly. These features make the RF energy harvesting wireless communication (RF-EHWC) technique attractive to a wide range of applications. The objective of this article is to investigate the latest research activities on the practical RF-EHWC design. The distribution of RF energy in the real environment, the hardware design of RF-EHWC devices and the practical issues in the implementation of RF-EHWC networks are discussed. At the end of this article, we introduce several interesting applications that exploit the RF-EHWC technology to provide smart healthcare services for animals, wirelessly charge the wearable devices, and implement 5G-assisted RF-EHWC
Sensores passivos alimentados por transmissão de energia sem fios para aplicações de Internet das coisas
Nowadays, the Wireless Sensor Networks (WSNs) depend on the battery
duration of the sensors and there is a renewed interest in creating a passive
sensor network scheme in the area of Internet of Things (IoT) and space
oriented WSN systems. The challenges for the future of radio communications
have a twofold evolution, one being the low power consumption
and, another, the adaptability and intelligent use of the available resources.
Specially designed radios should be used to reduce power consumption, and
adapt to the environment in a smart and e cient way. This thesis will focus
on the development of passive sensors based on low power communication
(backscatter) with Wireless Power Transfer (WPT) capabilities used in IoT
applications. In that sense, several high order modulations for the communication
will be explored and proposed in order to increase the data rate.
Moreover, the sensors need to be small and cost e ective in order to be
embedded in other technologies or devices. Consequently, the RF front-end
of the sensors will be designed and implemented in Monolithic Microwave
Integrated Circuit (MMIC).Atualmente, as redes de sensores sem fios dependem da duração da bateria
e,deste modo, existe um interesse renovado em criar um esquema de rede
de sensores passivos na área de internet das coisas e sistemas de redes
de sensores sem fios relacionados com o espaço. Os desafios do futuro
das comunicações de rádio têm uma dupla evolução, sendo um o baixo
consumo de energia e, outro, a adaptação e o uso inteligente dos recursos
disponíveis. Rádios diferentes dos convencionais devem ser usados para
reduzir o consumo de energia e devem adaptar-se ao ambiente de forma
inteligente e eficiente, de modo a que este use a menor quantidade de
energia possível para estabelecer a comunicação. Esta tese incide sobre o
desenvolvimento de sensores passivos baseados em comunicação de baixo
consumo energético (backscatter) com recurso a transmissão de energia sem
fios de modo a que possam ser usados em diferentes aplicações inseridas na
internet das coisas. Nesse sentido, várias modulações de alta ordem para a
comunicação backscatter serão exploradas e propostas com o objectivo de
aumentar a taxa de transmissão de dados. Além disso, os sensores precisam
de ser reduzidos em tamanho e económicos de modo a serem incorporados
em outras tecnologias ou dispositivos. Consequentemente, o front-end de
rádio frequência dos sensores será projetado e implementado em circuito
integrado de microondas monolítico.Programa Doutoral em Engenharia Eletrotécnic
- …