Design and experiments with a 30 DOF robot

A 30 degree-of-freedom (DOF) planar hyper-redundant manipulator is constructed in order to validate and demonstrate the authors' previous work on a framework for hyper-redundant robot kinematic analysis and algorithm development. The implementation of this robot is reviewed, and experimental work in hyper-redundant manipulation, obstacle avoidance, and locomotion is summarized. Potential benefits of high-DOF manipulators include superior obstacle avoidance ability, increased robustness with respect to mechanical failure, and the ability to perform new forms of robot locomotion and grasping

A General Numerical Method for Hyper-Redundant Manipulator Inverse Kinematics

Hyper-redundant robots have a very large or infinite degree of kinematic redundancy. A generalized resolved-rate technique for solving hyper-redundant manipulator inverse kinematics using a backbone curve is introduced. This method is applicable even in cases when explicit representation of the backbone curve intrinsic geometry cannot be written in closed form. Problems of end-effector trajectory tracking which were previously intractable can now be handled with this technique. Examples include configurations generated using the calculus of variations. The method is naturally parallelizable for fast digital and/or analog computation

Control Techniques for Robot Manipulator Systems with Modeling Uncertainties

This dissertation describes the design and implementation of various nonlinear control strategies for robot manipulators whose dynamic or kinematic models are uncertain. Chapter 2 describes the development of an adaptive task-space tracking controller for robot manipulators with uncertainty in the kinematic and dynamic models. The controller is developed based on the unit quaternion representation so that singularities associated with the otherwise commonly used three parameter representations are avoided. Experimental results for a planar application of the Barrett whole arm manipulator (WAM) are provided to illustrate the performance of the developed adaptive controller. The controller developed in Chapter 2 requires the assumption that the manipulator models are linearly parameterizable. However there might be scenarios where the structure of the manipulator dynamic model itself is unknown due to difficulty in modeling. One such example is the continuum or hyper-redundant robot manipulator. These manipulators do not have rigid joints, hence, they are difficult to model and this leads to significant challenges in developing high-performance control algorithms. In Chapter 3, a joint level controller for continuum robots is described which utilizes a neural network feedforward component to compensate for dynamic uncertainties. Experimental results are provided to illustrate that the addition of the neural network feedforward component to the controller provides improved tracking performance. While Chapter\u27s 2 and 3 described two different joint controllers for robot manipulators, in Chapter 4 a controller is developed for the specific task of whole arm grasping using a kinematically redundant robot manipulator. The whole arm grasping control problem is broken down into two steps; first, a kinematic level path planner is designed which facilitates the encoding of both the end-effector position as well as the manipulators self-motion positioning information as a desired trajectory for the manipulator joints. Then, the controller described in Chapter 3, which provides asymptotic tracking of the encoded desired joint trajectory in the presence of dynamic uncertainties is utilized. Experimental results using the Barrett Whole Arm Manipulator are presented to demonstrate the validity of the approach

Robots Hiper-Redundantes: Clasificación, Estado del Arte y Problemática

Los robots hiper-redundantes son aquellos que tienen un número muy elevado de grados de libertad. En su uso cotidiano, la redundancia es referida para indicar una repetición o un uso excesivo de un concepto. En el campo de la robótica, la redundancia puede ofrecer numerosos beneficios frente a los robots convencionales. Los robots hiper-redundantes poseen una mayor habilidad para sortear obstáculos, son tolerantes a fallos en algunas de sus articulaciones y también pueden ofrecer ventajas cinemáticas. En este artículo se presentan los conceptos generales para entender este tipo de robots, así como una clasificación de los mismos, su potencial, su problemática y su evolución a lo largo de la historia

Nonlinear Control Techniques for Robot Manipulators

This Masters thesis describes the design and implementation of control strategies for the following topics of research: i) Whole Arm Grasping Control for Redundant Robot Manipulators, ii) Neural Network Grasping Controller for Continuum Robots and, iii) Coordination Control for Haptic and Teleoperator Systems. An approach to whole arm grasping of objects using redundant robot manipulators is presented. A kinematic control which facilitates the encoding of both the end-effector position, as well as body self-motion positioning information as a desired trajectory signal for the manipulator joints is developed. An approach is presented to whole arm grasping control for continuum robots. The grasping controller is developed in two stages; high level path planning for the grasping objective, and a low level joint controller using a neural network feedforward component to compensate for dynamic uncertainties. Lastly, two controllers are developed for nonlinear haptic and teleoperator systems for coordination of the master and slave systems

Dielectric elastomer actuators for binary robotics and mechatronics

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2006.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections."February 2006."Includes bibliographical references (p. 145-153).Future robotics and mechatronics applications will require systems that are simple, robust, lightweight and inexpensive. A suggested solution for future systems is binary actuation. Binary actuation is the mechanical analogy to digital electronics, where actuators "flip" between two discrete states. Systems can be simple since low-level feedback control, sensors, wiring and electronics are virtually eliminated. However, conventional actuators, such as DC motors and gearbox are not appropriate for binary robotics because they are complex, heavy, and expensive. This thesis proposes a new actuation technology for binary robotics and mechatronics based on dielectric elastomer (DE) technology. DE actuators are a novel class of polymer actuators that have shown promising low-cost performance. These actuators were not well understood and, as a result, faced major reliability problems. Fundamental studies conducted in this thesis reveal that reliable, high performance DE actuation based on highly viscoelastic polymers can be obtained at high deformation rates, when used under fast, intermittent motion.(cont.) Also, analytical models revealed that viscoelasticity and current leakage through the film govern performance. These results are verified by an in-depth experimental characterizion of DE actuation. A new DE actuator concept using multi-layered diamond-shaped films is proposed. Essential design tools such as reliability/performance trade-offs maps, scaling laws, and design optimization metrics are proposed. A unit binary module is created by combining DE actuators with bistable structures to provide intermittent motion in applications requiring long-duration stateholding. An application example of binary robots for medical interventions inside Magnetic Resonance Imaging (MRI) systems illustrates the technology's potential.by Jean-Sébastien Plante.Ph.D

Design and Analysis of Exaggerated Rectilinear Gait-Based Snake-Inspired Robots

Snake-inspired locomotion is much more maneuverable compared to conventional locomotion concepts and it enables a robot to navigate through rough terrain. A rectilinear gait is quite flexible and has the following benefits: functionality on a wide variety of terrains, enables a highly stable robot platform, and provides pure undulatory motion without passive wheels. These benefits make rectilinear gaits especially suitable for search and rescue applications. However, previous robot designs utilizing rectilinear gaits were slow in speed and required considerable vertical motion. This dissertation will explore the development and implementation of a new exaggerated rectilinear gait that which will enable high speed locomotion and more efficient operation in a snake-inspired robot platform. The exaggerated rectilinear gait will emulate the natural snake's rectilinear gait to gain the benefit a snake's terrain adaptability, but the sequence and range of joint motion will be greatly exaggerated to achieve higher velocities to support robot speeds within the range of human walking speed. The following issues will be investigated in this dissertation. First, this dissertation will address the challenge of developing a snake-inspired robot capable of executing exaggerated rectilinear gaits. To successfully execute the exaggerated rectilinear gait, a snake-inspired robot platform must be able to perform high speed linear expansion/contraction and pivoting motions between segments. In addition to high speed joint motion, the new mechanical architecture much also incorporate a method for providing positive traction during gait execution. Second, a new exaggerated gait dynamics model will be developed using well established kinematics and dynamics analysis techniques. In addition to the exaggerated rectilinear gaits which emphasize high speed, a set of exaggerated rectilinear gaits which emphasize high traction will also be developed for application on difficult terrain types. Finally, an exaggerated rectilinear that emphasizes energy efficiency is defined and analyzed. This dissertation provides the foundations for realizing a high speed limbless locomotion capable of meeting the needs of the search, rescue, and recovery applications