Multi-physics modelling and experimental validation of electrovibration based haptic devices

Electrovibration tactile displays exploit the polarisation of the finger pad, caused by an insulated high voltage supplied plate. This results in electrostatic attraction, which can be used to modulate the users' perception of an essentially flat surface and induce texture sensation. Two analytical models of electrovibration, based on parallel plate capacitor assumption, are demonstrably taken and assessed by comparisons with experimental results published in literature. In addition, an experimental setup was developed to measure the electrostatic force between the finger pad and a high voltage supplied plate in a static and out-of-contact state in order to support the use of parallel plate capacitor model. Development, validation, and application of a computational framework for modelling tactile scenarios on real and virtual surfaces rendered by electrovibration technique is presented. The framework incorporates fully parametric model in terms of materials and geometry of the finger pad, virtual and real surfaces, and can serve as a tool for virtual prototyping and haptic rendering in electrovibration tactile displays. This is achieved by controlling the applied voltage signal in order to guarantee similar lateral force cues in real and simulated surfaces

A novel tactile display for softness and texture rendering in tele-operation tasks

Softness and texture high-frequency information represent fundamental haptic properties for every day life activities and environment tactual exploration. While several displays have been produced to convey either softness or high-frequency information, there is no or little evidence of systems that are able to reproduce both these properties in an integrated fashion. This aspect is especially crucial in medical tele-operated procedures, where roughness and stiffness of human tissues are both important to correctly identify given pathologies through palpation (e.g. in tele-dermatology). This work presents a fabric yielding display (FYD-pad), a fabric-based tactile display for softness and texture rendering. The system exploits the control of two motors to modify both the stretching state of the elastic fabric for softness rendering and to convey texture information on the basis of accelerometer-based data. At the same time, the measurement of the contact area can be used to control remote or virtual robots. In this paper, we discuss the architecture of FYD-pad and the techniques used for softness and texture reproduction as well as for synthesizing probe-surface interactions from real data. Tele-operation examples and preliminary experiments with humans are reported, which show the effectiveness of the device in delivering both softness and texture information

Modern Applications of Electrostatics and Dielectrics

Electrostatics and dielectric materials have important applications in modern society. As such, they require improved characteristics. More and more equipment needs to operate at high frequency, high voltage, high temperature, and other harsh conditions. This book presents an overview of modern applications of electrostatics and dielectrics as well as research progress in the field

An Overview of Wearable Haptic Technologies and Their Performance in Virtual Object Exploration.

We often interact with our environment through manual handling of objects and exploration of their properties. Object properties (OP), such as texture, stiffness, size, shape, temperature, weight, and orientation provide necessary information to successfully perform interactions. The human haptic perception system plays a key role in this. As virtual reality (VR) has been a growing field of interest with many applications, adding haptic feedback to virtual experiences is another step towards more realistic virtual interactions. However, integrating haptics in a realistic manner, requires complex technological solutions and actual user-testing in virtual environments (VEs) for verification. This review provides a comprehensive overview of recent wearable haptic devices (HDs) categorized by the OP exploration for which they have been verified in a VE. We found 13 studies which specifically addressed user-testing of wearable HDs in healthy subjects. We map and discuss the different technological solutions for different OP exploration which are useful for the design of future haptic object interactions in VR, and provide future recommendations

Tactile Roughness Perception of Virtual Gratings by Electrovibration

Realistic display of tactile textures on touch screens is a big step forward for haptic technology to reach a wide range of consumers utilizing electronic devices on a daily basis. Since the texture topography cannot be rendered explicitly by electrovibration on touch screens, it is important to understand how we perceive the virtual textures displayed by friction modulation via electrovibration. We investigated the roughness perception of real gratings made of plexiglass and virtual gratings displayed by electrovibration through a touch screen for comparison. In particular, we conducted two psychophysical experiments with 10 participants to investigate the effect of spatial period and the normal force applied by finger on roughness perception of real and virtual gratings in macro size. We also recorded the contact forces acting on the participants' finger during the experiments. The results showed that the roughness perception of real and virtual gratings are different. We argue that this difference can be explained by the amount of fingerpad penetration into the gratings. For real gratings, penetration increased tangential forces acting on the finger, whereas for virtual ones where skin penetration is absent, tangential forces decreased with spatial period. Supporting our claim, we also found that increasing normal force increases the perceived roughness of real gratings while it causes an opposite effect for the virtual gratings. These results are consistent with the tangential force profiles recorded for both real and virtual gratings. In particular, the rate of change in tangential force ($dF_t/dt$) as a function of spatial period and normal force followed trends similar to those obtained for the roughness estimates of real and virtual gratings, suggesting that it is a better indicator of the perceived roughness than the tangential force magnitude.Comment: Manuscript received June 25, 2019; revised November 15, 2019; accepted December 11, 201

Haptics: Science, Technology, Applications

This open access book constitutes the proceedings of the 12th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2020, held in Leiden, The Netherlands, in September 2020. The 60 papers presented in this volume were carefully reviewed and selected from 111 submissions. The were organized in topical sections on haptic science, haptic technology, and haptic applications. This year's focus is on accessibility

Vis2Hap: Vision-based Haptic Rendering by Cross-modal Generation

To assist robots in teleoperation tasks, haptic rendering which allows human operators access a virtual touch feeling has been developed in recent years. Most previous haptic rendering methods strongly rely on data collected by tactile sensors. However, tactile data is not widely available for robots due to their limited reachable space and the restrictions of tactile sensors. To eliminate the need for tactile data, in this paper we propose a novel method named as Vis2Hap to generate haptic rendering from visual inputs that can be obtained from a distance without physical interaction. We take the surface texture of objects as key cues to be conveyed to the human operator. To this end, a generative model is designed to simulate the roughness and slipperiness of the object's surface. To embed haptic cues in Vis2Hap, we use height maps from tactile sensors and spectrograms from friction coefficients as the intermediate outputs of the generative model. Once Vis2Hap is trained, it can be used to generate height maps and spectrograms of new surface textures, from which a friction image can be obtained and displayed on a haptic display. The user study demonstrates that our proposed Vis2Hap method enables users to access a realistic haptic feeling similar to that of physical objects. The proposed vision-based haptic rendering has the potential to enhance human operators' perception of the remote environment and facilitate robotic manipulation

A Review of Smart Materials in Tactile Actuators for Information Delivery

As the largest organ in the human body, the skin provides the important sensory channel for humans to receive external stimulations based on touch. By the information perceived through touch, people can feel and guess the properties of objects, like weight, temperature, textures, and motion, etc. In fact, those properties are nerve stimuli to our brain received by different kinds of receptors in the skin. Mechanical, electrical, and thermal stimuli can stimulate these receptors and cause different information to be conveyed through the nerves. Technologies for actuators to provide mechanical, electrical or thermal stimuli have been developed. These include static or vibrational actuation, electrostatic stimulation, focused ultrasound, and more. Smart materials, such as piezoelectric materials, carbon nanotubes, and shape memory alloys, play important roles in providing actuation for tactile sensation. This paper aims to review the background biological knowledge of human tactile sensing, to give an understanding of how we sense and interact with the world through the sense of touch, as well as the conventional and state-of-the-art technologies of tactile actuators for tactile feedback delivery

Haptics: Science, Technology, Applications

This open access book constitutes the proceedings of the 12th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2020, held in Leiden, The Netherlands, in September 2020. The 60 papers presented in this volume were carefully reviewed and selected from 111 submissions. The were organized in topical sections on haptic science, haptic technology, and haptic applications. This year's focus is on accessibility