VLSI Design

This book provides some recent advances in design nanometer VLSI chips. The selected topics try to present some open problems and challenges with important topics ranging from design tools, new post-silicon devices, GPU-based parallel computing, emerging 3D integration, and antenna design. The book consists of two parts, with chapters such as: VLSI design for multi-sensor smart systems on a chip, Three-dimensional integrated circuits design for thousand-core processors, Parallel symbolic analysis of large analog circuits on GPU platforms, Algorithms for CAD tools VLSI design, A multilevel memetic algorithm for large SAT-encoded problems, etc

Limits on Fundamental Limits to Computation

An indispensable part of our lives, computing has also become essential to industries and governments. Steady improvements in computer hardware have been supported by periodic doubling of transistor densities in integrated circuits over the last fifty years. Such Moore scaling now requires increasingly heroic efforts, stimulating research in alternative hardware and stirring controversy. To help evaluate emerging technologies and enrich our understanding of integrated-circuit scaling, we review fundamental limits to computation: in manufacturing, energy, physical space, design and verification effort, and algorithms. To outline what is achievable in principle and in practice, we recall how some limits were circumvented, compare loose and tight limits. We also point out that engineering difficulties encountered by emerging technologies may indicate yet-unknown limits.Comment: 15 pages, 4 figures, 1 tabl

Technology-generic tool for interconnect reliability projections in 3D integrated circuits

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2001.Includes bibliographical references (p. 107-112).Recent developments in semiconductor processing technology has enabled the fabrication of a single integrated circuit (IC) with multiple device-interconnect layers or wafers stacked on each other. This approach is commonly referred to as the 3D integration of ICs. Although there has been significant research on the impact of 3D integration on chip size, interconnect delay, and overall system performance, the reliability issues in the 3D interconnect arrays are largely unknown. In this research, a novel Reliability Computer Aided Design (RCAD) tool ERNI-3D has been developed for reliability analysis of interconnects in a 3D IC. Using this tool, circuit designers can get interactive feedback on the reliability of their circuits associated with electromigration, 3D bonding, and joule heating. Based on a joint probability distribution, a full-chip reliability model combines all reliability figures from different components to give a useful number for the designers' reference. This initial version of ERNI-3D treats 3D circuits with two wafers or device-interconnect layers in the stack. However, the data-structures and algorithms in the tool are generic enough to make it compatible with 3D circuits with more than two device-interconnect layers, and to allow incorporation of more sophisticated reliability models in the future. Since 3D integration technology is not yet widespread, and no CAD tool supports IC layouts for such a technology, a novel layout methodology has been implemented in 3DMagic by extending MAGIC, a widely used layout editor in academia. Apart from the CAD tool work, this research has also led to the development of, and interesting experiments with, some 3D circuits for testing ERNI-3D. The test circuits investigated are a 3D 8-bit adder and an FPGA.by Syed Mohiul Alam.S.M

MIDAS: Automated Approach to Design Microwave Integrated Inductors and Transformers on Silicon

The design of modern radiofrequency integrated circuits on silicon operating at microwave and millimeter-waves requires the integration of several spiral inductors and transformers that are not commonly available in the process design-kits of the technologies. In this work we present an auxiliary CAD tool for Microwave Inductor (and transformer) Design Automation on Silicon (MIDAS) that exploits commercial simulators and allows the implementation of an automatic design flow, including three-dimensional layout editing and electromagnetic simulations. In detail, MIDAS allows the designer to derive a preliminary sizing of the inductor (transformer) on the bases of the design entries (specifications). It draws the inductor (transformer) layers for the specific process design kit, including vias and underpasses, with or without patterned ground shield, and launches the electromagnetic simulations, achieving effective design automation with respect to the traditional design flow for RFICs. With the present software suite the complete design time is reduced significantly (typically 1 hour on a PC based on Intel® Pentium® Dual 1.80GHz CPU with 2-GB RAM). Afterwards both the device equivalent circuit and the layout are ready to be imported in the Cadence environment

Printed Circuit Board (PCB) design process and fabrication

This module describes main characteristics of Printed Circuit Boards (PCBs). A brief history of PCBs is introduced in the first chapter. Then, the design processes and the fabrication of PCBs are addressed and finally a study case is presented in the last chapter of the module.Peer ReviewedPostprint (published version

Expanding Rapid Prototyping for Electronic Systems Integration of Arbitrary Form

An innovative method for rapid prototyping (RP) of electronic circuits with components characteristic of typical electronics applications was demonstrated using an enhanced version of a previously developed hybrid stereolithography (SL) and direct write (DW) system, where an existing SL machine was integrated with a three-axis DW fluid dispensing system for combined arbitrary form electronic systems manufacturing. This paper presents initial efforts at embedding functional electronic circuits using the hybrid SL/DW system. A simple temperature-sensitive circuit was selected, which oscillated an LED at a frequency proportional to the temperature sensed by the thermistor. The circuit was designed to incorporate all the required electronic components within a 2.5” x 2” x 0.5” SL part. Electrical interconnects between electronic components were deposited on the SL part with a DW system using silver conductive ink lines. Several inks were deposited, cured, and tested on a variety of SL resin substrates, and the E 1660 ink (Ercon Inc, Wareham, MA) was selected due to its measured lowest average resistivity on the SL substrates. The finished circuit was compared with Printed Circuit Board (PCB) technology for functionality. The electronic components used here include a low voltage battery, LM 555 timer chip, resistors, a thermistor, capacitors, and Light Emitting Diodes (LEDs). This circuit was selected because it (1) represented a simple circuit combining many typically used electronic components and thus provided a useful demonstration for integrated electronic systems manufacturing applicable to a wide variety of devices, and (2) provided an indication of the parasitic resistances and capacitances introduced by the fabrication process due to its sensitivity to manufacturing variation. The hybrid technology can help achieve significant size reductions, enable systems integration in atypical forms, a natural resistance to reverse engineering and possibly increase maximum operating temperatures of electronic circuits as compared to the traditional PCB process. This research demonstrates the ability of the hybrid SL/DW technology for fabricating combined electronic systems for unique electronics applications in which arbitrary form is a requirement and traditional PCB technology cannot be used.Mechanical Engineerin

An Efficient Framework For Fast Computer Aided Design of Microwave Circuits Based on the Higher-Order 3D Finite-Element Method

In this paper, an efficient computational framework for the full-wave design by optimization of complex microwave passive devices, such as antennas, filters, and multiplexers, is described. The framework consists of a computational engine, a 3D object modeler, and a graphical user interface. The computational engine, which is based on a finite element method with curvilinear higher-order tetrahedral elements, is coupled with built-in or external gradient-based optimization procedures. For speed, a model order reduction technique is used and the gradient computation is achieved by perturbation with geometry deformation, processed on the level of the individual mesh nodes. To maximize performance, the framework is targeted to multicore CPU architectures and its extended version can also use multiple GPUs. To illustrate the accuracy and high efficiency of the framework, we provide examples of simulations of a dielectric resonator antenna and full-wave design by optimization of two diplexers involving tens of unknowns, and show that the design can be completed within the duration of a few simulations using industry-standard FEM solvers. The accuracy of the design is confirmed by measurements