Vibration Control in Cable Robots Using a Multi-Axis Reaction System

The primary motivation of this thesis is to develop a control strategy for eliminating persistent vibrations in all six spatial directions of the end effector of a planar cable-driven parallel robotic manipulator. By analysing the controllability of a cable-driven robot dynamic model, the uncontrollable modes of the robot are identified. For such uncontrollable modes, a new multi-axis reaction system (MARS) is developed. The new MARS that is attached to the end effector is made of two identical pendulums driven by two servo motors. A decoupled PD controller strategy is developed for regulating controllable modes and a hierarchical sliding mode controller is developed for controlling the remaining modes of the cable robot using MARS. The performance of both controllers is studied and shown to be effective in simulation. The controllers are then implemented on an experimental test setup of a planar cable-driven manipulator. Both controllers are shown to completely eliminate the end effector vibrations

Advances in Bio-Inspired Robots

This book covers three major topics, specifically Biomimetic Robot Design, Mechanical System Design from Bio-Inspiration, and Bio-Inspired Analysis on A Mechanical System. The Biomimetic Robot Design part introduces research on flexible jumping robots, snake robots, and small flying robots, while the Mechanical System Design from Bio-Inspiration part introduces Bioinspired Divide-and-Conquer Design Methodology, Modular Cable-Driven Human-Like Robotic Arm andWall-Climbing Robot. Finally, in the Bio-Inspired Analysis on A Mechanical System part, research contents on the control strategy of Surgical Assistant Robot, modeling of Underwater Thruster, and optimization of Humanoid Robot are introduced

Kinematics and statics of cable-driven parallel robots by interval-analysis-based methods

In the past two decades the work of a growing portion of researchers in robotics focused on a particular group of machines, belonging to the family of parallel manipulators: the cable robots. Although these robots share several theoretical elements with the better known parallel robots, they still present completely (or partly) unsolved issues. In particular, the study of their kinematic, already a difficult subject for conventional parallel manipulators, is further complicated by the non-linear nature of cables, which can exert only efforts of pure traction. The work presented in this thesis therefore focuses on the study of the kinematics of these robots and on the development of numerical techniques able to address some of the problems related to it. Most of the work is focused on the development of an interval-analysis based procedure for the solution of the direct geometric problem of a generic cable manipulator. This technique, as well as allowing for a rapid solution of the problem, also guarantees the results obtained against rounding and elimination errors and can take into account any uncertainties in the model of the problem. The developed code has been tested with the help of a small manipulator whose realization is described in this dissertation together with the auxiliary work done during its design and simulation phases.Negli ultimi decenni il lavoro di una parte sempre maggiore di ricercatori che si occupano di robotica si è concentrato su un particolare gruppo di robot appartenenti alla famiglia dei manipolatori paralleli: i robot a cavi. Nonostante i numerosi studi al riguardo, questi robot presentano ancora oggi numerose problematiche del tutto (o in parte) irrisolte. Lo studio della loro cinematica nello specifico, già complesso per i manipolatori paralleli tradizionali, è ulteriormente complicato dalla natura non lineare dei cavi, i quali possono esercitare sforzi di sola trazione. Il lavoro presentato in questa tesi si concentra dunque sullo studio della cinematica dei robot a cavi e sulla messa a punto di tecniche numeriche in grado di affrontare parte delle problematiche ad essa legate. La maggior parte del lavoro è incentrata sullo sviluppo di una procedura per la soluzione del problema geometrico diretto di un generico manipolatore a cavi basata sull'analisi per intervalli. Questa tecnica di analisi numeirica, oltre a consentire una rapida soluzione del problema, permette di garantire i risultati ottenuti in caso di errori di cancellazione e arrotondamento e consente di considerare eventuali incertezze presenti nel modello del problema. Il codice sviluppato è stato testato attraverso un piccolo prototipo di manipolatore a cavi la cui realizzazione, avvenuta durante il percorso di dottrato, è descritta all'interno dell'elaborato unitamente al lavoro collaterale svolto durante la fase di progettazione e simulazione.Pendant les dernières décennies, le travail d'une partie toujours croissante de chercheurs qui s'occupent de robotique s'est focalisé sur un groupe spécifique de robots qui fait partie de la famille des manipulateurs parallèles: les robots à câbles. Malgré les nombreux études que l'on a consacré à ce sujet, ces robots présentent encore aujourd'hui plusieurs problématiques complètement ou partiellement irrésolues. En particulier l'étude de leur cinématique, qui se révèle déjà complexe pour les manipulateurs parallèles traditionnels, est rendu encore plus compliqué par la nature non linéaire des câbles qui peuvent seulement exercer des efforts de traction. Le travail présenté dans ma thèse concentre donc son attention sur l'étude de la cinématique des robots à câbles et sur la mise au point de techniques numériques capables d'aborder une partie des problématiques liées à cela. La plupart du travail se concentre sur l'élaboration d'un algorithme pour la résolution du problème géométrique direct d'un manipulateur à câbles général qui se fonde sur l'analyse par intervalles. Cette technique d'analyse permet non seulement de résoudre rapidement le problème mais également de garantir les résultats obtenus en cas d'erreur de cancellation et d'arrondi et de prendre en considération les incertitudes éventuellement presentes dans le modèle du problème. Le code développé a été testé grâce à un petit prototype de manipulateur à câbles dont la réalisation, qui a eu lieu pendant le parcours de doctorat, est décrite à l'intérieur du devoir en accord avec la phase de conception du projet et de simulation

Cellulo: Tangible Haptic Swarm Robots for Learning

Robots are steadily becoming one of the significant 21st century learning technologies that aim to improve education within both formal and informal environments. Such robots, called Robots for Learning, have so far been utilized as constructionist tools or social agents that aided learning from distinct perspectives. This thesis presents a novel approach to Robots for Learning that aims to explore new added values by means of investigating uses for robots in educational scenarios beyond those that are commonly tackled: We develop a platform from scratch to be "as versatile as pen and paper", namely as composed of easy to use objects that feel like they belong in the learning ecosystem while being seamlessly usable across many activities that help teach a variety of subjects. Following this analogy, we design our platform as many low-cost, palm-sized tangible robots that operate on printed paper sheets, controlled by readily available mobile computers such as smartphones or tablets. From the learners' perspective, our robots are thus physical and manipulable points of hands-on interaction with learning activities where they play the role of both abstract and concrete objects that are otherwise not easily represented. We realize our novel platform in four incremental phases, each of which consists of a development stage and multiple subsequent validation stages. First, we develop accurately positioned tangibles, characterize their localization performance and test the learners' interaction with our tangibles in a playful activity. Second, we integrate mobility into our tangibles and make them full-blown robots, characterize their locomotion performance and test the emerging notion of moving vs. being moved in a learning activity. Third, we enable haptic feedback capability on our robots, measure their range of usability and test them within a complete lesson that highlights this newly developed affordance. Fourth, we develop the means of building swarms with our haptic-enabled tangible robots and test the final form of our platform in a lesson co-designed with a teacher. Our effort thus contains the participation of more than 370 child learners over the span of these phases, which leads to the initial insights into this novel Robots for Learning avenue. Besides its main contributions to education, this thesis further contributes to a range of research fields related to our technological developments, such as positioning systems, robotic mechanism design, haptic interfaces and swarm robotics

Systematic Approaches for Telemedicine and Data Coordination for COVID-19 in Baja California, Mexico

Conference proceedings info: ICICT 2023: 2023 The 6th International Conference on Information and Computer Technologies Raleigh, HI, United States, March 24-26, 2023 Pages 529-542We provide a model for systematic implementation of telemedicine within a large evaluation center for COVID-19 in the area of Baja California, Mexico. Our model is based on human-centric design factors and cross disciplinary collaborations for scalable data-driven enablement of smartphone, cellular, and video Teleconsul-tation technologies to link hospitals, clinics, and emergency medical services for point-of-care assessments of COVID testing, and for subsequent treatment and quar-antine decisions. A multidisciplinary team was rapidly created, in cooperation with different institutions, including: the Autonomous University of Baja California, the Ministry of Health, the Command, Communication and Computer Control Center of the Ministry of the State of Baja California (C4), Colleges of Medicine, and the College of Psychologists. Our objective is to provide information to the public and to evaluate COVID-19 in real time and to track, regional, municipal, and state-wide data in real time that informs supply chains and resource allocation with the anticipation of a surge in COVID-19 cases. RESUMEN Proporcionamos un modelo para la implementación sistemática de la telemedicina dentro de un gran centro de evaluación de COVID-19 en el área de Baja California, México. Nuestro modelo se basa en factores de diseño centrados en el ser humano y colaboraciones interdisciplinarias para la habilitación escalable basada en datos de tecnologías de teleconsulta de teléfonos inteligentes, celulares y video para vincular hospitales, clínicas y servicios médicos de emergencia para evaluaciones de COVID en el punto de atención. pruebas, y para el tratamiento posterior y decisiones de cuarentena. Rápidamente se creó un equipo multidisciplinario, en cooperación con diferentes instituciones, entre ellas: la Universidad Autónoma de Baja California, la Secretaría de Salud, el Centro de Comando, Comunicaciones y Control Informático. de la Secretaría del Estado de Baja California (C4), Facultades de Medicina y Colegio de Psicólogos. Nuestro objetivo es proporcionar información al público y evaluar COVID-19 en tiempo real y rastrear datos regionales, municipales y estatales en tiempo real que informan las cadenas de suministro y la asignación de recursos con la anticipación de un aumento de COVID-19. 19 casos.ICICT 2023: 2023 The 6th International Conference on Information and Computer Technologieshttps://doi.org/10.1007/978-981-99-3236-

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion