Innovative Design and Realization of Microwave and Millimeter-Wave Integrated circuits

Ph.DDOCTOR OF PHILOSOPH

RF TRANSCEIVER DESIGN FOR WIRELESS SENSOR NETWORKS

Ph.DDOCTOR OF PHILOSOPH

An ultra low voltage micropower GPS receiver RF front-end for wildlife tracking

A fully integrated CMOS GPS receiver RF front end optimized for low power operation is presented. The system operates with a supply voltage down to 250 mV. A prototype has been fabricated in a 0.13μm CMOS process and includes a low voltage LNA, quadrature oscillators, and quadrature mixers. It exhibits an order of magnitude lower power consumption than the best previously published work. The system has a measured gain of 42 dB, a noise figure of 8.6 dB, and an oscillator phase noise of -113.8 dBc/Hz at a 1 MHz offset while consuming a maximum of 580 μW of power and requiring no external components

High performance RF and baseband building blocks for wireless receivers

Because of the unique architecture of wireless receivers, a designer must understand both the high frequency aspects as well as the low-frequency analog considerations for different building blocks of the receiver. The primary goal of this research work is to explore techniques for implementing high performance RF and baseband building blocks for wireless applications. Several novel techniques to improve the performance of analog building blocks are presented. An enhanced technique to couple two LC resonators is presented which does not degrade the loaded quality factor of the resonators which results in an increased dynamic range. A novel technique to automatically tune the quality factor of LC resonators is presented. The proposed scheme is stable and fast and allows programming both the quality factor and amplitude response of the LC filter. To keep the oscillation amplitude of LC VCOs constant and thus achieving a minimum phase noise and a reliable startup, a stable amplitude control loop is presented. The proposed scheme has been also used in a master-slave quality factor tuning of LC filters. An efficient and low-cost architecture for a 3.1GHz-10.6GHz ultra-wide band frequency synthesizer is presented. The proposed scheme is capable of generating 14A novel pseudo-differential transconductance amplifier is presented. The proposed scheme takes advantage of the second-order harmonic available at the output current of pseudo-differential structure to cancel the third-order harmonic distortion. A novel nonlinear function is proposed which inherently removes the third and the fifth order harmonics at its output signal. The proposed nonlinear block is used in a bandpass-based oscillator to generate a highly linear sinusoidal output. Finally, a linearized BiCMOS transconductance amplifier is presented. This transconductance is used to build a third-order linear phase low pass filter with a cut-off frequency of 264MHz for an ultra-wide band receiver. carrier frequencies

Design and realization of fully integrated multiband and multistandard bi-cmos sigma delta frequency synthesizer

Wireless communication has grown, exponentially, with wide range of applications offered for the customers. Among these, WLAN (2.4-2.5GHz, 3.6-3.7GHzand 4.915- 5.825GHz GHz), Bluetooth (2.4 GHz), and WiMAX (2.500-2.696 GHz, 3.4-3.8 GHz and 5.725-5.850 GHz) communication standard/technologies have found largest use local area, indoor – outdoor communication and entertainment system applications. One of the recent trends in this area of technology is to utilize compatible standards on a single chip solutions, while meeting the requirements of each, to provide customers systems with smaller size, lower power consumption and cheaper in cost. In this thesis, RF – Analog, and – Digital Integrated Circuit design methodologies and techniques are applied to realize a multiband / standart (WLAN and WiMAX) operation capable Voltage- Controlled-Oscillator (VCO) and Frequency Synthesizer. Two of the major building blocks of wireless communication systems are designed using 0.35 μm, AMS-Bipolar (HBT)-CMOS process technology. A new inductor switching concept is implemented for providing the multiband operation capability. Performance parameters such as operating frequencies, phase noise, power consumption, and tuning range are modeled and simulated using analytical approaches, ADS® and Cadence® design and simulation environments. Measurement and/or Figure-of-Merit (FOM) values of our circuits have revealed results that are comparable with already published data, using the similar technology, in the literature, indicating the strength of the design methodologies implemented in this study

Design and analysis of a 6/4-GHz receiver front end

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1995.Includes bibliographical references (p. 133-136).by Feikai Sheu.M.Eng

NASA patent abstracts bibliography: A continuing bibliography. Section 1: Abstracts (supplement 19)

Abstracts are cited for 130 patents and patent applications introduced into the NASA scientific and technical information system during the period of January 1981 through July 1981. Each entry consists of a citation, an abstract, and in most cases, a key illustration selected from the patent or application for patent

Circuit design and technological limitations of silicon RFICs for wireless applications

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2002.Includes bibliographical references (p. 201-206).Semiconductor technologies have been a key to the growth in wireless communication over the past decade, bringing added convenience and accessibility through advantages in cost, size, and power dissipation. A better understanding of how an IC technology affects critical RF signal chain components will greatly aid the design of wireless systems and the development of process technologies for the increasingly complex applications that lie on the horizon. Many of the evolving applications will embody the concept of adaptive performance to extract the maximum capability from the RF link in terms of bandwidth, dynamic range, and power consumption-further engaging the interplay of circuits and devices is this design space and making it even more difficult to discern a clear guide upon which to base technology decisions. Rooted in these observations, this research focuses on two key themes: 1) devising methods of implementing RF circuits which allow the performance to be dynamically tuned to match real-time conditions in a power-efficient manner, and 2) refining approaches for thinking about the optimization of RF circuits at the device level. Working toward a 5.8 GHz receiver consistent with 1 GBit/s operation, signal path topologies and adjustable biasing circuits are developed for low-noise amplifiers (LNAs) and voltage-controlled oscillators (VCOs) to provide a facility by which power can be conserved when the demand for sensitivity is low. As an integral component in this effort, tools for exploring device level issues are illustrated with both circuit types, helping to identify physical limitations and design techniques through which they can be mitigated.(cont.) The design of two LNAs and four VCOs is described, each realized to provide a fully-integrated solution in a 0.5 tm SiGe BiCMOS process, and each incorporating all biasing and impedance matching on chip. Measured results for these 5-6GHz circuits allow a number of poignant technology issues to be enlightened, including an exhibition of the importance of terminal resistances and capacitances, a demonstration of where the transistor fT is relevant and where it is not, and the most direct comparison of bipolar and CMOS solutions offered to date in this frequency range. In addition to covering a number of new circuit techniques, this work concludes with some new views regarding IC technologies for RF applications.by Donald A. Hitko.Ph.D

Integrated RF oscillators and LO signal generation circuits

This thesis deals with fully integrated LC oscillators and local oscillator (LO) signal generation circuits. In communication systems a good-quality LO signal for up- and down-conversion in transmitters is needed. The LO signal needs to span the required frequency range and have good frequency stability and low phase noise. Furthermore, most modern systems require accurate quadrature (IQ) LO signals. This thesis tackles these challenges by presenting a detailed study of LC oscillators, monolithic elements for good-quality LC resonators, and circuits for IQ-signal generation and for frequency conversion, as well as many experimental circuits. Monolithic coils and variable capacitors are essential, and this thesis deals with good structures of these devices and their proper modeling. As experimental test devices, over forty monolithic inductors and thirty varactors have been implemented, measured and modeled. Actively synthesized reactive elements were studied as replacements for these passive devices. At first glance these circuits show promising characteristics, but closer noise and nonlinearity analysis reveals that these circuits suffer from high noise levels and a small dynamic range. Nine circuit implementations with various actively synthesized variable capacitors were done. Quadrature signal generation can be performed with three different methods, and these are analyzed in the thesis. Frequency conversion circuits are used for alleviating coupling problems or to expand the number of frequency bands covered. The thesis includes an analysis of single-sideband mixing, frequency dividers, and frequency multipliers, which are used to perform the four basic arithmetical operations for the frequency tone. Two design cases are presented. The first one is a single-sideband mixing method for the generation of WiMedia UWB LO-signals, and the second one is a frequency conversion unit for a digital period synthesizer. The last part of the thesis presents five research projects. In the first one a temperature-compensated GaAs MESFET VCO was developed. The second one deals with circuit and device development for an experimental-level BiCMOS process. A cable-modem RF tuner IC using a SiGe process was developed in the third project, and a CMOS flip-chip VCO module in the fourth one. Finally, two frequency synthesizers for UWB radios are presented