A bistable soft gripper with mechanically embedded sensing and actuation for fast closed-loop grasping

Soft robotic grippers are shown to be high effective for grasping unstructured objects with simple sensing and control strategies. However, they are still limited by their speed, sensing capabilities and actuation mechanism. Hence, their usage have been restricted in highly dynamic grasping tasks. This paper presents a soft robotic gripper with tunable bistable properties for sensor-less dynamic grasping. The bistable mechanism allows us to store arbitrarily large strain energy in the soft system which is then released upon contact. The mechanism also provides flexibility on the type of actuation mechanism as the grasping and sensing phase is completely passive. Theoretical background behind the mechanism is presented with finite element analysis to provide insights into design parameters. Finally, we experimentally demonstrate sensor-less dynamic grasping of an unknown object within 0.02 seconds, including the time to sense and actuate

Improved GelSight Tactile Sensor for Measuring Geometry and Slip

A GelSight sensor uses an elastomeric slab covered with a reflective membrane to measure tactile signals. It measures the 3D geometry and contact force information with high spacial resolution, and successfully helped many challenging robot tasks. A previous sensor, based on a semi-specular membrane, produces high resolution but with limited geometry accuracy. In this paper, we describe a new design of GelSight for robot gripper, using a Lambertian membrane and new illumination system, which gives greatly improved geometric accuracy while retaining the compact size. We demonstrate its use in measuring surface normals and reconstructing height maps using photometric stereo. We also use it for the task of slip detection, using a combination of information about relative motions on the membrane surface and the shear distortions. Using a robotic arm and a set of 37 everyday objects with varied properties, we find that the sensor can detect translational and rotational slip in general cases, and can be used to improve the stability of the grasp.Comment: IEEE/RSJ International Conference on Intelligent Robots and System

FARMS: The Flexible Agricultural Robotics Manipulator

A technology utilization project was established with the Marshall Space Flight Center and the University of Georgia to develop an Earth-based, robotic end effector to process live plant (geranium) material which will improve productivity and efficiency in agricultural systems such as commercial nurseries and greenhouse systems. The aim is to apply this technology to NASA's presence in space, including permanently manned space stations and manned planetary communities requiring large scale food production needs

GelSlim: A High-Resolution, Compact, Robust, and Calibrated Tactile-sensing Finger

This work describes the development of a high-resolution tactile-sensing finger for robot grasping. This finger, inspired by previous GelSight sensing techniques, features an integration that is slimmer, more robust, and with more homogeneous output than previous vision-based tactile sensors. To achieve a compact integration, we redesign the optical path from illumination source to camera by combining light guides and an arrangement of mirror reflections. We parameterize the optical path with geometric design variables and describe the tradeoffs between the finger thickness, the depth of field of the camera, and the size of the tactile sensing area. The sensor sustains the wear from continuous use -- and abuse -- in grasping tasks by combining tougher materials for the compliant soft gel, a textured fabric skin, a structurally rigid body, and a calibration process that maintains homogeneous illumination and contrast of the tactile images during use. Finally, we evaluate the sensor's durability along four metrics that track the signal quality during more than 3000 grasping experiments.Comment: RA-L Pre-print. 8 page

A 3D printed monolithic soft gripper with adjustable stiffness

Soft robotics has recently gained a significant momentum as a newly emerging field in robotics that focuses on biomimicry, compliancy and conformability with safety in near-human environments. Beside conventional fabrication methods, additive manufacturing is a primary technique to employ to fabricate soft robotic devices. We developed a monolithic soft gripper, with variable stiffness fingers, that was fabricated as a one-piece device. Negative pressure was used for the actuation of the gripper while positive pressure was used to vary the stiffness of the fingers of the gripper. Finger bending and gripping capabilities of the monolithic soft gripper were experimentally tested. Finite element simulation and experimental results demonstrate that the proposed monolithic soft gripper is fully compliant, low cost and requires an actuation pressure below -100 kPa

3D printed pneumatic soft actuators and sensors: their modeling, performance quantification, control and applications in soft robotic systems

Continued technological progress in robotic systems has led to more applications where robots and humans operate in close proximity and even physical contact in some cases. Soft robots, which are primarily made of highly compliant and deformable materials, provide inherently safe features, unlike conventional robots that are made of stiff and rigid components. These robots are ideal for interacting safely with humans and operating in highly dynamic environments. Soft robotics is a rapidly developing field exploiting biomimetic design principles, novel sensor and actuation concepts, and advanced manufacturing techniques. This work presents novel soft pneumatic actuators and sensors that are directly 3D printed in one manufacturing step without requiring postprocessing and support materials using low-cost and open-source fused deposition modeling (FDM) 3D printers that employ an off-the-shelf commercially available soft thermoplastic poly(urethane) (TPU). The performance of the soft actuators and sensors developed is optimized and predicted using finite element modeling (FEM) analytical models in some cases. A hyperelastic material model is developed for the TPU based on its experimental stress-strain data for use in FEM analysis. The novel soft vacuum bending (SOVA) and linear (LSOVA) actuators reported can be used in diverse robotic applications including locomotion robots, adaptive grippers, parallel manipulators, artificial muscles, modular robots, prosthetic hands, and prosthetic fingers. Also, the novel soft pneumatic sensing chambers (SPSC) developed can be used in diverse interactive human-machine interfaces including wearable gloves for virtual reality applications and controllers for soft adaptive grippers, soft push buttons for science, technology, engineering, and mathematics (STEM) education platforms, haptic feedback devices for rehabilitation, game controllers and throttle controllers for gaming and bending sensors for soft prosthetic hands. These SPSCs are directly 3D printed and embedded in a monolithic soft robotic finger as position and touch sensors for real-time position and force control. One of the aims of soft robotics is to design and fabricate robotic systems with a monolithic topology embedded with its actuators and sensors such that they can safely interact with their immediate physical environment. The results and conclusions of this thesis have significantly contributed to the realization of this aim

Design and Fabrication of Fabric ReinforcedTextile Actuators forSoft Robotic Graspers

abstract: Wearable assistive devices have been greatly improved thanks to advancements made in soft robotics, even creation soft extra arms for paralyzed patients. Grasping remains an active area of research of soft extra limbs. Soft robotics allow the creation of grippers that due to their inherit compliance making them lightweight, safer for human interactions, more robust in unknown environments and simpler to control than their rigid counterparts. A current problem in soft robotics is the lack of seamless integration of soft grippers into wearable devices, which is in part due to the use of elastomeric materials used for the creation of most of these grippers. This work introduces fabric-reinforced textile actuators (FRTA). The selection of materials, design logic of the fabric reinforcement layer and fabrication method are discussed. The relationship between the fabric reinforcement characteristics and the actuator deformation is studied and experimentally verified. The FRTA are made of a combination of a hyper-elastic fabric material with a stiffer fabric reinforcement on top. In this thesis, the design, fabrication, and evaluation of FRTAs are explored. It is shown that by varying the geometry of the reinforcement layer, a variety of motion can be achieve such as axial extension, radial expansion, bending, and twisting along its central axis. Multi-segmented actuators can be created by tailoring different sections of fabric-reinforcements together in order to generate a combination of motions to perform specific tasks. The applicability of this actuators for soft grippers is demonstrated by designing and providing preliminary evaluation of an anthropomorphic soft robotic hand capable of grasping daily living objects of various size and shapes.Dissertation/ThesisMasters Thesis Biomedical Engineering 201

3D printed flexure hinges for soft monolithic prosthetic fingers

Mechanical compliance is one of the primary properties of structures in nature playing a key role in their efficiency. This study investigates a number of commonly used flexure hinges to determine a flexure hinge morphology, which generates large displacements under a lowest possible force input. The aim of this is to design a soft and monolithic robotic finger. Fused deposition modeling, a low-cost 3D printing technique, was used to fabricate the flexure hinges and the soft monolithic robotic fingers. Experimental and finite element analyses suggest that a nonsymmetric elliptical flexure hinge is the most suitable type for use in the soft monolithic robotic finger. Having estimated the effective elastic modulus, flexion of the soft monolithic robotic fingers was simulated and this showed a good correlation with the actual experimental results. The soft monolithic robotic fingers can be employed to handle objects with unknown shapes and are also potential low-cost candidates for establishing soft and one-piece prosthetic hands with light weight. A three-finger gripper has been constructed using the identified flexure hinge to handle objects with irregular shapes such as agricultural products