Memory disambiguation hardware: a review

One of the main challenges of modern processor designs is the implementation of scalable and efficient mechanisms to detect memory access order violations as a result of out-of-order execution. Conventional structures performing this task are complex, inefficient and power-hungry. This fact has generated a large body of work on optimizing address-based memory disambiguation logic, namely the load-store queue. In this paper we review the most significant proposals in this research field, focusing on our own contributions.Facultad de Informátic

Store Vulnerability Window (SVW): Re-Execution Filtering for Enhanced Load/Store Optimization

A high-bandwidth, low-latency load-store unit is a critical component of a dynamically scheduled processor. Unfortunately, it is also one of the most complex and non-scalable components. Recently, several researchers have proposed techniques that simplify the core load-store unit and improve its scalability in exchange for the in-order pre-retirement re-execution of some subset of the loads in the program. We call such techniques load/store optimizations. One recent optimization attacks load queue (LQ) scalability by replacing the expensive associative search that is used to enforce intra- and inter- thread ordering with load re-execution. A second attacks store queue (SQ) scalability by speculatively filtering some load accesses and some store entries from it. The speculatively accessed, speculatively populated SQ can be made smaller and faster, but load re-execution is required to verify the speculation. A third uses a hardware table to identify redundant loads and skip their execution altogether. Redundant load elimination is highly accurate but not 100%, so re-execution is needed to flag false eliminations. Unfortunately, the inherent benefits of load/store optimizations are mitigated by re-execution itself. Re-execution contends for cache bandwidths with store retirement, and serializes load re-execution with subsequent store retirement. If a particular technique requires a sufficient number of load re-executions, the cost of these re-executions will outweigh the benefits of the technique entirely and may even produce drastic slowdowns. This is the case for the SQ technique. Store Vulnerability Window (SVW) is a new mechanism that reduces the re-execution requirements of a given load/store optimization significantly, by an average of 85% across the three load/store optimizations we study. This reduction relieves cache port contention and removes many of the dynamic serialization events that contribute the bulk of re-execution’s cost, and allows these techniques to perform up to their full potential. For the scalable SQ optimization, this means the chnace to perform at all. Without SVW, this technique posts significant slowdowns. SVW is a simple scheme based on monotonic store sequence numbering and a novel application of Bloom Filtering. The cost of an effective SVW implementation is a 1KB buffer and an 2B field per LQ entry

A High-Frequency Load-Store Queue with Speculative Allocations for High-Level Synthesis

Dynamically scheduled high-level synthesis (HLS) enables the use of load-store queues (LSQs) which can disambiguate data hazards at circuit runtime, increasing throughput in codes with unpredictable memory accesses. However, the increased throughput comes at the price of lower clock frequency and higher resource usage compared to statically scheduled circuits without LSQs. The lower frequency often nullifies any throughput improvements over static scheduling, while the resource usage becomes prohibitively expensive with large queue sizes. This paper presents a method for achieving dynamically scheduled memory operations in HLS without significant clock period and resource usage increase. We present a novel LSQ based on shift-registers enabled by the opportunity to specialize queue sizes to a target code in HLS. We show a method to speculatively allocate addresses to our LSQ, significantly increasing pipeline parallelism in codes that could not benefit from an LSQ before. In stark contrast to traditional load value speculation, we do not require pipeline replays and have no overhead on misspeculation. On a set of benchmarks with data hazards, our approach achieves an average speedup of 11$\times$ against static HLS and 5$\times$ against dynamic HLS that uses a state of the art LSQ from previous work. Our LSQ also uses several times fewer resources, scaling to queues with hundreds of entries, and supports both on-chip and off-chip memory.Comment: To appear in the International Conference on Field Programmable Technology (FPT'23), Yokohama, Japan, 11-14 December 202

Memory disambiguation hardware: a review

One of the main challenges of modern processor designs is the implementation of scalable and efficient mechanisms to detect memory access order violations as a result of out-of-order execution. Conventional structures performing this task are complex, inefficient and power-hungry. This fact has generated a large body of work on optimizing address-based memory disambiguation logic, namely the load-store queue. In this paper we review the most significant proposals in this research field, focusing on our own contributions.Facultad de Informátic

Improving processor efficiency by exploiting common-case behaviors of memory instructions

Processor efficiency can be described with the help of a number of  desirable effects or metrics, for example, performance, power, area, design complexity and access latency. These metrics serve as valuable tools used in designing new processors and they also act as  effective standards for comparing current processors. Various factors impact the efficiency of modern out-of-order processors and one important factor is the manner in which instructions are processed through the processor pipeline. In this dissertation research, we study the impact of load and store instructions (collectively known as memory instructions) on processor efficiency,  and show how to improve efficiency by exploiting common-case or  predictable patterns in the behavior of memory instructions. The memory behavior patterns that we focus on in our research are the predictability of memory dependences, the predictability in data forwarding patterns,   predictability in instruction criticality and conservativeness in resource allocation and deallocation policies. We first design a scalable  and high-performance memory dependence predictor and then apply accurate memory dependence prediction to improve the efficiency of the fetch engine of a simultaneous multi-threaded processor. We then use predictable data forwarding patterns to eliminate power-hungry  hardware in the processor with no loss in performance.  We then move to  studying instruction criticality to improve  processor efficiency. We study the behavior of critical load instructions  and propose applications that can be optimized using  predictable, load-criticality  information. Finally, we explore conventional techniques for allocation and deallocation  of critical structures that process memory instructions and propose new techniques to optimize the same.  Our new designs have the potential to reduce  the power and the area required by processors significantly without losing  performance, which lead to efficient designs of processors.Ph.D.Committee Chair: Loh, Gabriel H.; Committee Member: Clark, Nathan; Committee Member: Jaleel, Aamer; Committee Member: Kim, Hyesoon; Committee Member: Lee, Hsien-Hsin S.; Committee Member: Prvulovic, Milo

Scalable hardware memory disambiguation

This dissertation deals with one of the long-standing problems in Computer Architecture – the problem of memory disambiguation. Microprocessors typically reorder memory instructions during execution to improve concurrency. Such microprocessors use hardware memory structures for memory disambiguation, known as LoadStore Queues (LSQs), to ensure that memory instruction dependences are satisfied even when the memory instructions execute out-of-order. A typical LSQ implementation (circa 2006) holds all in-flight memory instructions in a physically centralized LSQ and performs a fully associative search on all buffered instructions to ensure that memory dependences are satisfied. These LSQ implementations do not scale because they use large, fully associative structures, which are known to be slow and power hungry. The increasing trend towards distributed microarchitectures further exacerbates these problems. As on-chip wire delays increase and high-performance processors become necessarily distributed, centralized structures such as the LSQ can limit scalability. This dissertation describes techniques to create scalable LSQs in both centralized and distributed microarchitectures. The problems and solutions described in this thesis are motivated and validated by real system designs. The dissertation starts with a description of the partitioned primary memory system of the TRIPS processor, of which the LSQ is an important component, and then through a series of optimizations describes how the power, area, and centralization problems of the LSQ can be solved with minor performance losses (if at all) even for large number of in flight memory instructions. The four solutions described in this dissertation — partitioning, filtering, late binding and efficient overflow management — enable power-, area-efficient, distributed and scalable LSQs, which in turn enable aggressive large-window processors capable of simultaneously executing thousands of instructions. To mitigate the power problem, we replaced the power-hungry, fully associative search with a power-efficient hash table lookup using a simple address-based Bloom filter. Bloom filters are probabilistic data structures used for testing set membership and can be used to quickly check if an instruction with the same data address is likely to be found in the LSQ without performing the associative search. Bloom filters typically eliminate more than 80% of the associative searches and they are highly effective because in most programs, it is uncommon for loads and stores to have the same data address and be in execution simultaneously. To rectify the area problem, we observe the fact that only a small fraction of all memory instructions are dependent, that only such dependent instructions need to be buffered in the LSQ, and that these instructions need to be in the LSQ only for certain parts of the pipelined execution. We propose two mechanisms to exploit these observations. The first mechanism, area filtering, is a hardware mechanism that couples Bloom filters and dependence predictors to dynamically identify and buffer only those instructions which are likely to be dependent. The second mechanism, late binding, reduces the occupancy and hence size of the LSQ. Both of these optimizations allows the number of LSQ slots to be reduced by up to one-half compared to a traditional organization without any performance degradation. Finally, we describe a new decentralized LSQ design for handling LSQ structural hazards in distributed microarchitectures. Decentralization of LSQs, and to a large extent distributed microarchitectures with memory speculation, has proved to be impractical because of the high performance penalties associated with the mechanisms for dealing with hazards. To solve this problem, we applied classic flow-control techniques from interconnection networks for handling resource con- flicts. The first method, memory-side buffering, buffers the overflowing instructions in a separate buffer near the LSQs. The second scheme, execution-side NACKing, sends the overflowing instruction back to the issue window from which it is later re-issued. The third scheme, network buffering, uses the buffers in the interconnection network between the execution units and memory to hold instructions when the LSQ is full, and uses virtual channel flow control to avoid deadlocks. The network buffering scheme is the most robust of all the overflow schemes and shows less than 1% performance degradation due to overflows for a subset of SPEC CPU 2000 and EEMBC benchmarks on a cycle-accurate simulator that closely models the TRIPS processor. The techniques proposed in this dissertation are independent, architectureneutral and their cumulative benefits result in LSQs that can be partitioned at a fine granularity and have low design complexity. Each of these partitions selectively buffers only memory instructions with true dependences and can be closely coupled with the execution units thus minimizing power, area, and latency. Such LSQ designs with near-ideal characteristics are well suited for microarchitectures with thousands of instructions in-flight and may enable even more aggressive microarchitectures in the future.Computer Science

NoSQ: Store-Load Communication without a Store Queue

This paper presents NoSQ (short for No Store Queue), a microarchitecture that performs store-load communication without a store queue and without executing stores in the out-of-order engine. NoSQ implements store-load communication using speculative memory bypassing (SMB), the dynamic short-circuiting of DEF-store-load-USE chains to DEF-USE chains. Whereas previous proposals used SMB as an opportunistic complement to conventional store queue-based forwarding, NoSQ uses SMB as a store queue replacement. NoSQ relies on two supporting mechanisms. The first is an advanced store-load bypassing predictor that for a given dynamic load can predict whether that load will bypass and the identity of the communicating store. The second is an efficient verification mechanism for both bypassed and non-bypassed loads using in-order load re-execution with an SMB-aware store vulnerability window (SVW) filter. The primary benefit of NoSQ is a simple, fast datapath that does not contain store-load forwarding hardware; all loads get their values either from the data cache or from the register file. Experiments show that this simpler design - despite being more speculative - slightly outperforms a conventional store-queue based design on most benchmarks (by 2% on average)