Merenje snage po standardu IEEE 1459-2010 upotrebom rezonatorskih filterskih struktura

Liberalizacijom tržišta električne energije merenje električne snage i energije u nesinusoidalnim uslovima dobilo je veliki značaj. Ta tema je još uvek predmet aktivnih rasprava, tako da ne postoji neka generalizovana teorija koja se može uzeti kao osnova za potrebe obračuna, evaluacije kvaliteta energije, detekcije izvora harmonika i kompenzacije u energetskim sistemima. Kao posledica, postojeći standardi se odnose na sinusoidalne slučajeve i ne daju definiciju reaktivne energije (i/ili snage) u nesinusoidalnim uslovima. Slično, oni ne daju specifične zahteve za tačnost i odgovarajuće uslove testiranja u prisustvu harmonijskih izobličenja. Jedini standard koji se odnosi na ovu problematiku je IEEE Std. 1459-2010 koji ne daje definiciju reaktivne snage u nesinusoidalnim uslovima. Koncept ovog IEEE standarda je baziran na razdvajanju snage na fundamentalni i nefundamentalni deo. Ovaj prilaz separacije na fundamentalni i harmonijski deo može se primeniti na najbitnije veličine i može se iskoristiti kao indikator kvaliteta. U radu je prikazana jedna efikasna algoritamska struktura za računanje električnih veličina definisanih standardom IEEE 1459-2010. Struktura se sastoji od dva dekuplovana dela. Za estimaciju spektra napona i struje korišćena je efikasna metoda bazirana na paralelnoj strukturi rezonantnih filtera sa zajedničkom povratnom vezom. U drugom delu strukture se na osnovu poznatog spektra naponskog i strujnog signala računaju komponente snage i indikatori kvaliteta na osnovu definicija datih u standardu IEEE 1459-2010. Predloženi algoritam je pogodan za primene u realnom vremenu. Realizacijom virtualnog instrumenta baziranog na PC računaru i programskom paketu LabVIEW, u cilju procene performansi algoritma, izvršene su računarske simulacije i eksperimentalna merenja i dati njihovi rezultati.This paper proposes an accurate and computationally efficient implementation of the IEEE Std. 1459-2010 for power measurements. An implementation is based on digital resonators embedded in a feedback loop. In the first algorithm stage, the unknown signal harmonic parameters are estimated. By this, the voltage and current signals are processed independently of each other. In the second algorithm stage, the unknown power components are estimated (calculated) based on estimated spectra. To demonstrate the performance of the developed algorithm, computer-simulated data and laboratory testing records are processed. Simple LabView implementation, based on the point-by-point processing feature, demonstrates techniques modest computation requirements and confirms that the proposed algorithm is suitable for real-time applications

Merenje komponenti električne snage po standardu IEEE 1459-2010

Merenje u nesinusoidalnim uslovima je u centru istraživanja i mnogo se napora ulaže da se pojam reaktivne snage star više od sedamdeset godina definiše na nov način. Postoji niz pristupa rešavanju problema definisanja snaga i/ili pokušaja koncipiranja merne instrumentacije za merenje snaga u sistemima naizmenične struje pod nesinusoidalnim uslovima. Jedini standard koji se odnosi na specifične zahteve za tačnost i odgovarajuće uslove testiranja u prisustvu harmonijskih izobličenja je IEEE Std. 1459-2010, koji ne daje definiciju reaktivne snage u nesinusoidalnim uslovima. Koncept ovog IEEE standarda je baziran na raz-dvajanju snage na fundamentalni i nefundamentalni deo. U literaturi su prisutne različite tehnike za imple-mentaciju standarda IEEE Std. 1459-2010. Ovaj standard je implementiran pomoću dva osnovna prilaza: (1) dvostepeni algoritam sa estimacijom harmonijskih spektara naponskog i strujnog signala u prvom koraku i računanjem nepoznatih komponenti snage u drugom koraku i (2) filterska implementacija kombinovana sa Clarke-Park transformacijom u slučaju trofaznog sistema. U radu je prikazana nova metoda za merenje električnih veličina definisanih standardom IEEE 1459-2010 koristeći drugi pristup. Ključni elementi su adaptivni pojasni i niskopropusni FIR filteri koji izdvajaju fundamentalnu i jednosmernu komponentu. U radu su korišćene tehnike oversemplinga i decimacionih filtera, čime se izbegavaju problemi vezani za osetljivost na zaokruživanje koeficijenata FIR kaskadnih filtera velikog reda, smanjuje obim numeričkih računanja i povećava tačnost merenja. Estimacija simetričnih komponenti vrši se pomoću matrice adaptivnih faznih korektora. U cilju procene performansi algoritma izvršene su računarske simulacije i dati njihovi rezultati.In this paper, the design and implementation of a novel recursive method for the power measurement ac-cording to the IEEE Standard 1459-2010 have been described. The most important parts are adaptive band and low-pass FIR filters that extract fundamental and dc components, respectively. In addition, by using oversampling techniques and decimation filters, coefficient sensitivity problems of the large-order FIR comb cascade structure are overridden and the parameter estimation accuracy is improved. The symmetrical components are estimated through a transformation matrix of adaptive phase shifters. The effectiveness of the proposed techniques is demonstrated by simulation results

Analog radio over fiber solutions for multi-band 5g systems

This study presents radio over fiber (RoF) solutions for the fifth-generation (5G) of wireless networks. After the state of the art and a technical background review, four main contributions are reported. The first one is proposing and investigating a RoF technique based on a dual-drive Mach-Zehnder modulator (DD-MZM) for multi-band mobile fronthauls, in which two radiofrequency (RF) signals in the predicted 5G bands individually feed an arm of the optical modulator. Experimental results demonstrate the approach enhances the RF interference mitigation and can prevail over traditional methods. The second contribution comprises the integration of a 5G transceiver, previously developed by our group, in a passive optical network (PON) using RoF technology and wavelength division multiplexing (WDM) overlay. The proposed architecture innovates by employing DD-MZM and enables to simultaneously transport baseband and 5G candidate RF signals in the same PON infrastructure. The proof-of-concept includes the transmission of a generalized frequency division multiplexing (GFDM) signal generated by the 5G transceiver in the 700 MHz band, a 26 GHz digitally modulated signal as a millimeter-waves 5G band, and a baseband signal from an gigabit PON (GPON). Experimental results demonstrate the 5G transceiver digital performance when using RoF technology for distributing the GFDM signal, as well as Gbit/s throughput at 26 GHz. The third contribution is the implementation of a flexible-waveform and multi-application fiber-wireless (FiWi) system toward 5G. Such system includes the FiWi transmission of the GFDM and filtered orthogonal frequency division multiplexing (F-OFDM) signals at 788 MHz, toward long-range cells for remote or rural mobile access, as well as the recently launched 5G NR standard in microwave and mm-waves, aiming enhanced mobile broadband indoor and outdoor applications. Digital signal processing (DSP) is used for selecting the waveform and linearizing the RoF link. Experimental results demonstrate the suitability of the proposed solution to address 5G scenarios and requirements, besides the applicability of using existent fiber-to-the-home (FTTH) networks from Internet service providers for implementing 5G systems. Finally, the fourth contribution is the implementation of a multi-band 5G NR system with photonic-assisted RF amplification (PAA). The approach takes advantage of a novel PAA technique, based on RoF technology and four-wave mixing effect, that allows straightforward integration to the transport networks. Experimental results demonstrate iv uniform and stable 15 dB wideband gain for Long Term Evolution (LTE) and three 5G signals, distributed in the frequency range from 780 MHz to 26 GHz and coexisting in the mobile fronthaul. The obtained digital performance has efficiently met the Third-Generation Partnership Project (3GPP) requirements, demonstrating the applicability of the proposed approach for using fiber-optic links to distribute and jointly amplify LTE and 5G signals in the optical domain.Agência 1Este trabalho apresenta soluções de rádio sobre fibra (RoF) para aplicações em redes sem fio de quinta geração (5G), e inclui quatro contribuições principais. A primeira delas refere-se à proposta e investigação de uma técnica de RoF baseada no modulador eletroóptico de braço duplo, dual-drive Mach-Zehnder (DD-MZM), para a transmissão simultânea de sinais de radiofrequência (RF) em bandas previstas para redes 5G. Resultados experimentais demonstram que o uso do DD-MZM favorece a ausência de interferência entre os sinais de RF transmitidos. A segunda contribuição trata da integração de um transceptor de RF, desenvolvido para aplicações 5G e apto a prover a forma de onda conhecida como generalized frequency division multiplexing (GFDM), em uma rede óptica passiva (PON) ao utilizar RoF e multiplexação por divisão de comprimento de onda (WDM). A arquitetura proposta permite transportar, na mesma infraestrutura de rede, sinais em banda base e de radiofrequência nas faixas do espectro candidatas para 5G. A prova de conceito inclui a distribuição conjunta de três tipos de sinais: um sinal GFDM na banda de 700 MHz, proveniente do transceptor desenvolvido; um sinal digital na frequência de 26 GHz, assumindo a faixa de ondas milimétricas; sinais em banda base provenientes de uma PON dedicada ao serviço de Internet. Resultados experimentais demonstram o desempenho do transceptor de RF ao utilizar a referida arquitetura para distribuir sinais GFDM, além de taxas de transmissão de dados da ordem de Gbit/s na faixa de 26 GHz. A terceira contribuição corresponde à implementação de um sistema fibra/rádio potencial para redes 5G, operando inclusive com o padrão ―5G New Radio (5G NR)‖ nas faixas de micro-ondas e ondas milimétricas. Tal sistema é capaz de prover macro células na banda de 700 MHz para aplicações de longo alcance e/ou rurais, utilizando sinais GFDM ou filtered orthogonal frequency division multiplexing (F-OFDM), assim como femto células na banda de 26 GHz, destinada a altas taxas de transmissão de dados para comunicações de curto alcance. Resultados experimentais demonstram a aplicabilidade da solução proposta para redes 5G, além da viabilidade de utilizar redes ópticas pertencentes a provedores de Internet para favorecer sistemas de nova geração. Por fim, a quarta contribuição trata da implementação de um sistema 5G NR multibanda, assistido por amplificação de RF no domínio óptico. Esse sistema faz uso de um novo método de amplificação, baseado no efeito não linear da mistura de quatro ondas, que vi permite integração direta em redes de transporte envolvendo rádio sobre fibra. Resultados experimentais demonstram ganho de RF igual a 15 dB em uma ampla faixa de frequências (700 MHz até 26 GHz), atendendo simultaneamente tecnologias de quarta e quinta geração. O desempenho digital obtido atendeu aos requisitos estabelecidos pela 3GPP (Third-Generation Partnership Project), indicando a aplicabilidade da solução em questão para distribuir e conjuntamente amplificar sinais de RF em enlaces de fibra óptica

Measurements, Models, Systems and Design

531 s.

Fully Evolvable Optimal Neurofuzzy Controller Using Adaptive Critic Designs

A near-optimal neurofuzzy external controller is designed in this paper for a static compensator (STATCOM) in a multimachine power system. The controller provides an auxiliary reference signal for the STATCOM in such a way that it improves the damping of the rotor speed deviations of its neighboring generators. A zero-order Takagi-Sugeno fuzzy rule base constitutes the core of the controller. A heuristic dynamic programming (HDP) based approach is used to further train the controller and enable it to provide nonlinear near-optimal control at different operating conditions of the power system. Based on the connectionist systems theory, the parameters of the neurofuzzy controller, including the membership functions, undergo training. Simulation results are provided that compare the performance of the neurofuzzy controller with and without updating the fuzzy set parameters. Simulation results indicate that updating the membership functions can noticeably improve the performance of the controller and reduce the size of the STATCOM, which leads to lower capital investment

Power Quality in Electrified Transportation Systems

"Power Quality in Electrified Transportation Systems" has covered interesting horizontal topics over diversified transportation technologies, ranging from railways to electric vehicles and ships. Although the attention is chiefly focused on typical railway issues such as harmonics, resonances and reactive power flow compensation, the integration of electric vehicles plays a significant role. The book is completed by some additional significant contributions, focusing on the interpretation of Power Quality phenomena propagation in railways using the fundamentals of electromagnetic theory and on electric ships in the light of the latest standardization efforts