1,678 research outputs found
Determination of protection system requirements for DC UAV electrical power networks for enhanced capability and survivability
A growing number of designs of future Unmanned Aerial Vehicle (UAV) applications utilise dc for the primary power distribution method. Such systems typically employ large numbers of power electronic converters as interfaces for novel loads and generators. The characteristic behaviour of these systems under electrical fault conditions, and in particular their natural response, can produce particularly demanding protection requirements. Whilst a number of protection methods for multi-terminal dc networks have been proposed in literature, these are not universally applicable and will not meet the specific protection challenges associated with the aerospace domain. Through extensive analysis, this paper seeks to determine the operating requirements of protection systems for compact dc networks proposed for future UAV applications, with particular emphasis on dealing with the issues of capacitive discharge in these compact networks. The capability of existing multi-terminal dc network protection methods and technologies are then assessed against these criteria in order to determine their suitability for UAV applications. Recommendations for best protection practice are then proposed and key inhibiting research challenges are discussed
Power quality in DC distribution networks
This paper presents an overview of power quality in low-voltage DC distribution networks. We study which of the power quality disturbances in AC networks are also relevant in DC networks, as well as other disturbances specific to DC networks. The paper reviews the current status of international regulations in this topic and proposes different indices for the detection and characterization of the main types of power quality disturbances, presenting some results obtained in different laboratory tests in DC networks using different DC voltage shapes delivered by different DC power source types
Balancing the Migration of Virtual Network Functions with Replications in Data Centers
The Network Function Virtualization (NFV) paradigm is enabling flexibility,
programmability and implementation of traditional network functions into
generic hardware, in form of the so-called Virtual Network Functions (VNFs).
Today, cloud service providers use Virtual Machines (VMs) for the instantiation
of VNFs in the data center (DC) networks. To instantiate multiple VNFs in a
typical scenario of Service Function Chains (SFCs), many important objectives
need to be met simultaneously, such as server load balancing, energy efficiency
and service execution time. The well-known \emph{VNF placement} problem
requires solutions that often consider \emph{migration} of virtual machines
(VMs) to meet this objectives. Ongoing efforts, for instance, are making a
strong case for migrations to minimize energy consumption, while showing that
attention needs to be paid to the Quality of Service (QoS) due to service
interruptions caused by migrations. To balance the server allocation strategies
and QoS, we propose using \emph{replications} of VNFs to reduce migrations in
DC networks. We propose a Linear Programming (LP) model to study a trade-off
between replications, which while beneficial to QoS require additional server
resources, and migrations, which while beneficial to server load management can
adversely impact the QoS. The results show that, for a given objective, the
replications can reduce the number of migrations and can also enable a better
server and data center network load balancing
Ancillary Services in Hybrid AC/DC Low Voltage Distribution Networks
In the last decade, distribution systems are experiencing a drastic transformation
with the advent of new technologies. In fact, distribution networks are no longer passive
systems, considering the current integration rates of new agents such as distributed generation,
electrical vehicles and energy storage, which are greatly influencing the way these systems are
operated. In addition, the intrinsic DC nature of these components, interfaced to the AC system
through power electronics converters, is unlocking the possibility for new distribution topologies
based on AC/DC networks. This paper analyzes the evolution of AC distribution systems,
the advantages of AC/DC hybrid arrangements and the active role that the new distributed agents
may play in the upcoming decarbonized paradigm by providing different ancillary services.Ministerio de Economía y Competitividad ENE2017-84813-RUnión Europea (Programa Horizonte 2020) 76409
Adaptive DC stabilizer with reduced DC fault current for active distribution power system application
This paper takes a systematic view on the control and protection of medium power DC networks in an active distribution power system considering fault current limiting, system control and converter design. Reduced terminal capacitance and extra DC impedance are used to limit DC fault current and reduce the required converter current rating for medium power DC networks. An adaptive DC power stabilizer is proposed to alleviate possible system instability brought by the fault current limiting settings in the presence of constant power load. The effect of the current limiting method and the proposed stabilizer on DC fault current and stability enhancement are validated by simulation studies using a simple two-converter DC network and a multi-terminal DC network in an active distribution power syste
Impact of converter interface type on the protection requirements for DC aircraft power systems
The utilization of converter interfaces has the potential to significantly alter the protection system design requirements in future aircraft platforms. However, the impact these converters will have can vary widely, depending on the topology of converter, its filter requirements and its control strategy. This means that the precise impact on the network fault response is often difficult to quantify. Through the analysis of example converter topologies and literature on the protection of DC networks, this paper tackles this problem by identifying key design characteristics of converters which influence their fault response. Using this information, the converters are classified based on their general fault characteristics, enabling potential protection issues and solutions to be readily identified. Finally, the paper discusses the potential for system level design benefits through the optimisation of converter topology and protection system design
Symmetry in Renewable Energy and Power Systems
This book includes original research papers related to renewable energy and power systems in which theoretical or practical issues of symmetry are considered. The book includes contributions on voltage stability analysis in DC networks, optimal dispatch of islanded microgrid systems, reactive power compensation, direct power compensation, optimal location and sizing of photovoltaic sources in DC networks, layout of parabolic trough solar collectors, topologic analysis of high-voltage transmission grids, geometric algebra and power systems, filter design for harmonic current compensation. The contributions included in this book describe the state of the art in this field and shed light on the possibilities that the study of symmetry has in power grids and renewable energy systems
- …