28 research outputs found

    Communication synthesis of networks-on-chip (NoC)

    Get PDF
    The emergence of networks-on-chip (NoC) as the communication infrastructure solution for complex multi-core SoCs presents communication synthesis challenges. This dissertation addresses the design and run-time management aspects of communication synthesis. Design reuse and the infeasibility of Intellectual Property (IP) core interface redesign, requires the development of a Core-Network Interface (CNI) which allows them to communicate over the on-chip network. The absence of intelligence amongst the NoC components, entails the introduction of a CNI capable of not only providing basic packetization and depacketization, but also other essential services such as reliability, power management, reconguration and test support. A generic CNI architecture providing these services for NoCs is proposed and evaluated in this dissertation. Rising on-chip communication power costs and reliability concerns due to these, motivate the development of a peak power management technique that is both scalable to dierent NoCs and adaptable to varying trac congurations. A scalable and adaptable peak power management technique - SAPP - is proposed and demonstrated. Latency and throughput improvements observed with SAPP demonstrate its superiority over existing techniques. Increasing design complexity make prediction of design lifetimes dicult. Post SoC deployment, an on-line health monitoring scheme, is essential to maintain con- dence in the correct operation of on-chip cores. The rising design complexity and IP core test costs makes non-concurrent testing of the IP cores infeasible. An on-line scheme capable of managing IP core test in the presence of executing applications is essential. Such a scheme ensures application performance and system power budgets are eciently managed. This dissertation proposes Concurrent On-Line Test (COLT) for NoC-based systems and demonstrates how a robust implementation of COLT using a Test Infrastructure-IP (TI-IP) can be used to maintain condence in the correct operation of the SoC

    Analyse und Erweiterung eines fehler-toleranten NoC für SRAM-basierte FPGAs in Weltraumapplikationen

    Get PDF
    Data Processing Units for scientific space mission need to process ever higher volumes of data and perform ever complex calculations. But the performance of available space-qualified general purpose processors is just in the lower three digit megahertz range, which is already insufficient for some applications. As an alternative, suitable processing steps can be implemented in hardware on a space-qualified SRAM-based FPGA. However, suitable devices are susceptible against space radiation. At the Institute for Communication and Network Engineering a fault-tolerant, network-based communication architecture was developed, which enables the construction of processing chains on the basis of different processing modules within suitable SRAM-based FPGAs and allows the exchange of single processing modules during runtime, too. The communication architecture and its protocol shall isolate non SEU mitigated or just partial SEU mitigated modules affected by radiation-induced faults to prohibit the propagation of errors within the remaining System-on-Chip. In the context of an ESA study, this communication architecture was extended with further components and implemented in a representative hardware platform. Based on the acquired experiences during the study, this work analyses the actual fault-tolerance characteristics as well as weak points of this initial implementation. At appropriate locations, the communication architecture was extended with mechanisms for fault-detection and fault-differentiation as well as with a hardware-based monitoring solution. Both, the former measures and the extension of the employed hardware-platform with selective fault-injection capabilities for the emulation of radiation-induced faults within critical areas of a non SEU mitigated processing module, are used to evaluate the effects of radiation-induced faults within the communication architecture. By means of the gathered results, further measures to increase fast detection and isolation of faulty nodes are developed, selectively implemented and verified. In particular, the ability of the communication architecture to isolate network nodes without SEU mitigation could be significantly improved.Instrumentenrechner für wissenschaftliche Weltraummissionen müssen ein immer höheres Datenvolumen verarbeiten und immer komplexere Berechnungen ausführen. Die Performanz von verfügbaren qualifizierten Universalprozessoren liegt aber lediglich im unteren dreistelligen Megahertz-Bereich, was für einige Anwendungen bereits nicht mehr ausreicht. Als Alternative bietet sich die Implementierung von entsprechend geeigneten Datenverarbeitungsschritten in Hardware auf einem qualifizierten SRAM-basierten FPGA an. Geeignete Bausteine sind jedoch empfindlich gegenüber der Strahlungsumgebung im Weltraum. Am Institut für Datentechnik und Kommunikationsnetze wurde eine fehlertolerante netzwerk-basierte Kommunikationsarchitektur entwickelt, die innerhalb eines geeigneten SRAM-basierten FPGAs Datenverarbeitungsmodule miteinander nach Bedarf zu Verarbeitungsketten verbindet, sowie den Austausch von einzelnen Modulen im Betrieb ermöglicht. Nicht oder nur partiell SEU mitigierte Module sollen bei strahlungsbedingten Fehlern im Modul durch das Protokoll und die Fehlererkennungsmechanismen der Kommunikationsarchitektur isoliert werden, um ein Ausbreiten des Fehlers im restlichen System-on-Chip zu verhindern. Im Kontext einer ESA Studie wurde diese Kommunikationsarchitektur um Komponenten erweitert und auf einer repräsentativen Hardwareplattform umgesetzt. Basierend auf den gesammelten Erfahrungen aus der Studie, wird in dieser Arbeit eine Analyse der tatsächlichen Fehlertoleranz-Eigenschaften sowie der Schwachstellen dieser ursprünglichen Implementierung durchgeführt. Die Kommunikationsarchitektur wurde an geeigneten Stellen um Fehlerdetektierungs- und Fehlerunterscheidungsmöglichkeiten erweitert, sowie um eine hardwarebasierte Überwachung ergänzt. Sowohl diese Maßnahmen, als auch die Erweiterung der Hardwareplattform um gezielte Fehlerinjektions-Möglichkeiten zum Emulieren von strahlungsinduzierten Fehlern in kritischen Komponenten eines nicht SEU mitigierten Prozessierungsmoduls werden genutzt, um die tatsächlichen auftretenden Effekte in der Kommunikationsarchitektur zu evaluieren. Anhand der Ergebnisse werden weitere Verbesserungsmaßnahmen speziell zur schnellen Detektierung und Isolation von fehlerhaften Knoten erarbeitet, selektiv implementiert und verifiziert. Insbesondere die Fähigkeit, fehlerhafte, nicht SEU mitigierte Netzwerkknoten innerhalb der Kommunikationsarchitektur zu isolieren, konnte dabei deutlich verbessert werden

    Inter-module Interfacing techniques for SoCs with multiple clock domains to address challenges in modern deep sub-micron technologies

    Get PDF
    Miniaturization of integrated circuits (ICs) due to the improvement in lithographic techniques in modem deep sub-micron (DSM) technologies allows several complex processing elements to coexist in one IC, which are called System-on-Chip. As a first contribution, this thesis quantitatively analyzes the severity of timing constraints associated with Clock Distribution Network (CDN) in modem DSM technologies and shows that different processing elements may work in different dock domains to alleviate these constraints. Such systems are known as Globally Asynchronous Locally Synchronous (GALS) systems. It is imperative that different processing elements of a GALS system need to communicate with each other through some interfacing technique, and these interfaces can be asynchronous or synchronous. Conventionally, the asynchronous interfaces are described at the Register Transfer Logic (RTL) or system level. Such designs are susceptible to certain design constraints that cannot be addressed at higher abstraction levels; crosstalk glitch is one such constraint. This thesis initially identifies, using an analytical model, the possibility of asynchronous interface malfunction due to crosstalk glitch propagation. Next, we characterize crosstalk glitch propagation under normal operating conditions for two different classes of asynchronous protocols, namely bundled data protocol based and delay insensitive asynchronous designs. Subsequently, we propose a logic abstraction level modeling technique, which provides a framework to the designer to verify the asynchronous protocols against crosstalk glitches. The utility of this modeling technique is demonstrated experimentally on a Xilinx Virtex-II Pro FPGA. Furthermore, a novel methodology is proposed to quench such crosstalk glitch propagation through gating the asynchronous interface from sending the signal during potential glitch vulnerable instances. This methodology is termed as crosstalk glitch gating. This technique is successfully applied to obtain crosstalk glitch quenching in the representative interfaces. This thesis also addresses the dock skew challenges faced by high-performance synchronous interfacing methodologies in modem DSM technologies. The proposed methodology allows communicating modules to run at a frequency that is independent of the dock skew. Leveraging a novel clock-scheduling algorithm, our technique permits a faster module to communicate safely with a slower module without slowing down. Safe data communications for mesochronous schemes and for the cases when communicating modules have dock frequency ratios of integer or coprime numbers are theoretically explained and experimentally demonstrated. A clock-scheduling technique to dynamically accommodate phase variations is also proposed. These methods are implemented to the Xilinx Virtex II Pro technology. Experiments prove that the proposed interfacing scheme allows modules to communicate data safely, for mesochronous schemes, at 350 MHz, which is the limit of the technology used, under a dock skew of more than twice the time period (i.e. a dock skew of 12 ns

    High-level services for networks-on-chip

    Get PDF
    Future technology trends envision that next-generation Multiprocessors Systems-on- Chip (MPSoCs) will be composed of a combination of a large number of processing and storage elements interconnected by complex communication architectures. Communication and interconnection between these basic blocks play a role of crucial importance when the number of these elements increases. Enabling reliable communication channels between cores becomes therefore a challenge for system designers. Networks-on-Chip (NoCs) appeared as a strategy for connecting and managing the communication between several design elements and IP blocks, as required in complex Systems-on-Chip (SoCs). The topic can be considered as a multidisciplinary synthesis of multiprocessing, parallel computing, networking, and on- chip communication domains. Networks-on-Chip, in addition to standard communication services, can be employed for providing support for the implementation of system-level services. This dissertation will demonstrate how high-level services can be added to an MPSoC platform by embedding appropriate hardware/software support in the network interfaces (NIs) of the NoC. In this dissertation, the implementation of innovative modules acting in parallel with protocol translation and data transmission in NIs is proposed and evaluated. The modules can support the execution of the high-level services in the NoC at a relatively low cost in terms of area and energy consumption. Three types of services will be addressed and discussed: security, monitoring, and fault tolerance. With respect to the security aspect, this dissertation will discuss the implementation of an innovative data protection mechanism for detecting and preventing illegal accesses to protected memory blocks and/or memory mapped peripherals. The second aspect will be addressed by proposing the implementation of a monitoring system based on programmable multipurpose monitoring probes aimed at detecting NoC internal events and run-time characteristics. As last topic, new architectural solutions for the design of fault tolerant network interfaces will be presented and discussed

    Design for prognostics and security in field programmable gate arrays (FPGAs).

    Get PDF
    There is an evolutionary progression of Field Programmable Gate Arrays (FPGAs) toward more complex and high power density architectures such as Systems-on- Chip (SoC) and Adaptive Compute Acceleration Platforms (ACAP). Primarily, this is attributable to the continual transistor miniaturisation and more innovative and efficient IC manufacturing processes. Concurrently, degradation mechanism of Bias Temperature Instability (BTI) has become more pronounced with respect to its ageing impact. It could weaken the reliability of VLSI devices, FPGAs in particular due to their run-time reconfigurability. At the same time, vulnerability of FPGAs to device-level attacks in the increasing cyber and hardware threat environment is also quadrupling as the susceptible reliability realm opens door for the rogue elements to intervene. Insertion of highly stealthy and malicious circuitry, called hardware Trojans, in FPGAs is one of such malicious interventions. On the one hand where such attacks/interventions adversely affect the security ambit of these devices, they also undermine their reliability substantially. Hitherto, the security and reliability are treated as two separate entities impacting the FPGA health. This has resulted in fragmented solutions that do not reflect the true state of the FPGA operational and functional readiness, thereby making them even more prone to hardware attacks. The recent episodes of Spectre and Meltdown vulnerabilities are some of the key examples. This research addresses these concerns by adopting an integrated approach and investigating the FPGA security and reliability as two inter-dependent entities with an additional dimension of health estimation/ prognostics. The design and implementation of a small footprint frequency and threshold voltage-shift detection sensor, a novel hardware Trojan, and an online transistor dynamic scaling circuitry present a viable FPGA security scheme that helps build a strong microarchitectural level defence against unscrupulous hardware attacks. Augmented with an efficient Kernel-based learning technique for FPGA health estimation/prognostics, the optimal integrated solution proves to be more dependable and trustworthy than the prevalent disjointed approach.Samie, Mohammad (Associate)PhD in Transport System

    Nutrition, Health and Athletic Performance

    Get PDF
    Optimal nutrition is fundamental for enhancing training, recovery and performance in sport. Therefore, research has aimed to determine the efficacy of appropriate intake of nutrients, fluids, and supplements and their role in exercise performance. The purpose of this Special Issue entitled “Nutrition, Health and Athletic Performance” is to highlight recent research examining aspects of sports nutrition and exercise performance. Manuscript submissions of original research, meta-analyses, or reviews of the scientific literature, which targets nutritional strategies to benefit performance and health, are welcome. Studies performed in humans are preferred given the applied nature of this issue
    corecore