VANETs Multipath Video Data Streaming Considering Road Features

Multipath video streaming in Vehicular Ad-hoc Networks (VANETs) is an evolving research topic. The adoption of video transmission in VANETs communication has become essential due to the comprehensiveness and applicability of video data for on-road advertisement and infotainment. Meanwhile, several research studies have considered how to apply and improve the transmission of the video quality. Due to this, the concurrent multipath transmission has been employed in order to achieve load balancing and path diversity, because of the high data rate of the video data.  However, the main nature of the road, which is the pathway for VANET nodes has not been considered explicitly. In this paper, the road features are considered for VANETs multipath video streaming based on the greedy geographical routing protocol. Thus, VANETs Multipath Video Streaming based on Road Features (VMVS-RF) protocol has been proposed. The protocol was compared with an ordinary Multipath Video Streaming (MVS). The result demonstrates that the proposed VMVS-RF protocol outperforms the MVS in terms of Data Receiving Rate (DRR), Structural Similarity (SSIM) index and Packet Loss Ratio (PLR)

Quality of service provision in mobile multimedia - a survey

The prevalence of multimedia applications has drastically increased the amount of multimedia data. With the drop of the hardware cost, more and more mobile devices with higher capacities are now used. The widely deployed wireless LAN and broadband wireless networks provide the ubiquitous network access for multimedia applications. Provision of Quality of Service (QoS) is challenging in mobile ad hoc networks because of the dynamic characteristics of mobile networks and the limited resources of the mobile devices. The wireless network is not reliable due to node mobility, multi-access channel and multi-hop communication. In this paper, we provide a survey of QoS provision in mobile multimedia, addressing the technologies at different network layers and cross-layer design. This paper focuses on the QoS techniques over IEEE 802.11e networks. We also provide some thoughts about the challenges and directions for future research

Interference-aware multipath video streaming in vehicular environments

The multipath transmission is one of the suitable transmission methods for high data rate oriented communication such as video streaming. Each video packets are split into smaller frames for parallel transmission via different paths. One path may interfere with another path due to these parallel transmissions. The multipath oriented interference is due to the route coupling which is one of the major challenges in vehicular traffic environments. The route coupling increases channel contention resulting in video packet collision. In this context, this paper proposes an Interference-aware Multipath Video Streaming (I-MVS) framework focusing on link and node disjoint optimal paths. Specifically, a multipath vehicular network model is derived. The model is utilized to develop interference-aware video streaming method considering angular driving statistics of vehicles. The quality of video streaming links is measured based on packet error rate considering non-circular transmission range oriented shadowing effects. Algorithms are developed as a complete operational I-MVS framework. The comparative performance evaluation attests the benefit of the proposed framework considering various video streaming related metrics

Cross-layer Optimized Wireless Video Surveillance

A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system. The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion. In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality. The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos. In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work. Adviser: Song C

Cross-layer Optimized Wireless Video Surveillance

A wireless video surveillance system contains three major components, the video capture and preprocessing, the video compression and transmission over wireless sensor networks (WSNs), and the video analysis at the receiving end. The coordination of different components is important for improving the end-to-end video quality, especially under the communication resource constraint. Cross-layer control proves to be an efficient measure for optimal system configuration. In this dissertation, we address the problem of implementing cross-layer optimization in the wireless video surveillance system. The thesis work is based on three research projects. In the first project, a single PTU (pan-tilt-unit) camera is used for video object tracking. The problem studied is how to improve the quality of the received video by jointly considering the coding and transmission process. The cross-layer controller determines the optimal coding and transmission parameters, according to the dynamic channel condition and the transmission delay. Multiple error concealment strategies are developed utilizing the special property of the PTU camera motion. In the second project, the binocular PTU camera is adopted for video object tracking. The presented work studied the fast disparity estimation algorithm and the 3D video transcoding over the WSN for real-time applications. The disparity/depth information is estimated in a coarse-to-fine manner using both local and global methods. The transcoding is coordinated by the cross-layer controller based on the channel condition and the data rate constraint, in order to achieve the best view synthesis quality. The third project is applied for multi-camera motion capture in remote healthcare monitoring. The challenge is the resource allocation for multiple video sequences. The presented cross-layer design incorporates the delay sensitive, content-aware video coding and transmission, and the adaptive video coding and transmission to ensure the optimal and balanced quality for the multi-view videos. In these projects, interdisciplinary study is conducted to synergize the surveillance system under the cross-layer optimization framework. Experimental results demonstrate the efficiency of the proposed schemes. The challenges of cross-layer design in existing wireless video surveillance systems are also analyzed to enlighten the future work. Adviser: Song C

Cross-Layer Optimization for Video Summary Transmission over Wireless Networks

Abstract — Video summarization has gained increased popularity in the emerging multimedia communication applications, however, very limited work has been conducted to address the transmission problem of video summary frames. In this paper, we propose a cross-layer optimization framework for delivering video summaries over wireless networks. Within a rate-distortion theoretical framework, the source coding, allowable retransmission, and adaptive modulation and coding have been jointly optimized, which reflects the joint selection of parameters at physical, data link and application layers. The goal is to achieve the best video quality and content coverage of the received summary frames and to meet the delay constraint. The problem is solved using Lagrangian relaxation and dynamic programming. Experimental results indicate the effectiveness and efficiency of the proposed optimization framework, especially when the delay budget imposed by the upper layer applications is small, where more than 10 % distortion gain can be achieved. Index Terms — universal multimedia access, video summarization, adaptive modulation and coding, automatic repeat request, cross-layer optimization, rate distortion, video communication. I