On Timing Model Extraction and Hierarchical Statistical Timing Analysis

In this paper, we investigate the challenges to apply Statistical Static Timing Analysis (SSTA) in hierarchical design flow, where modules supplied by IP vendors are used to hide design details for IP protection and to reduce the complexity of design and verification. For the three basic circuit types, combinational, flip-flop-based and latch-controlled, we propose methods to extract timing models which contain interfacing as well as compressed internal constraints. Using these compact timing models the runtime of full-chip timing analysis can be reduced, while circuit details from IP vendors are not exposed. We also propose a method to reconstruct the correlation between modules during full-chip timing analysis. This correlation can not be incorporated into timing models because it depends on the layout of the corresponding modules in the chip. In addition, we investigate how to apply the extracted timing models with the reconstructed correlation to evaluate the performance of the complete design. Experiments demonstrate that using the extracted timing models and reconstructed correlation full-chip timing analysis can be several times faster than applying the flattened circuit directly, while the accuracy of statistical timing analysis is still well maintained

Single-Event Upset Analysis and Protection in High Speed Circuits

The effect of single-event transients (SETs) (at a combinational node of a design) on the system reliability is becoming a big concern for ICs manufactured using advanced technologies. An SET at a node of combinational part may cause a transient pulse at the input of a flip-flop and consequently is latched in the flip-flop and generates a soft-error. When an SET conjoined with a transition at a node along a critical path of the combinational part of a design, a transient delay fault may occur at the input of a flip-flop. On the other hand, increasing pipeline depth and using low power techniques such as multi-level power supply, and multi-threshold transistor convert almost all paths in a circuit to critical ones. Thus, studying the behavior of the SET in these kinds of circuits needs special attention. This paper studies the dynamic behavior of a circuit with massive critical paths in the presence of an SET. We also propose a novel flip-flop architecture to mitigate the effects of such SETs in combinational circuits. Furthermore, the proposed architecture can tolerant a single event upset (SEU) caused by particle strike on the internal nodes of a flip-flo

Linearization of The Timing Analysis and Optimization of Level-Sensitive Circuits

This thesis describes a linear programming (LP) formulation applicable to the static timing analysis of large scale synchronous circuits with level-sensitive latches. The automatic timing analysis procedure presented here is composed of deriving the connectivity information, constructing the LP model and solving the clock period minimization problem of synchronous digital VLSI circuits. In synchronous circuits with level-sensitive latches, operation at a reduced clock period (higher clock frequency) is possible by takingadvantage of both non-zero clock skew scheduling and time borrowing. Clock skew schedulingis performed in order to exploit the benefits of nonidentical clock signal delays on circuit timing. The time borrowing property of level-sensitive circuits permits higher operating frequencies compared to edge-sensitivecircuits. Considering time borrowing in the timing analysis, however, introduces non-linearity in this timing analysis. The modified big M (MBM) method is defined in order to transform the non-linear constraints arising in the problem formulation into solvable linear constraints. Equivalent LP model problemsfor single-phase clock synchronization of the ISCAS'89 benchmark circuits are generated and these problems are solved by the industrial LP solver CPLEX. Through the simultaneous application of time borrowing and clock skew scheduling, up to 63% improvements are demonstrated in minimum clock period with respect to zero-skew edge-sensitive synchronous circuits. The timing constraints governing thelevel-sensitive synchronous circuit operation not only solve the clock period minimization problem but also provide a common framework for the general timing analysis of such circuits. The inclusion of additional constraints into the problem formulation in order to meet the timing requirements imposed by specific applicationenvironments is discussed

Advanced Timing and Synchronization Methodologies for Digital VLSI Integrated Circuits

This dissertation addresses timing and synchronization methodologies that are critical to the design, analysis and optimization of high-performance, integrated digital VLSI systems. As process sizes shrink and design complexities increase, achieving timing closure for digital VLSI circuits becomes a significant bottleneck in the integrated circuit design flow. Circuit designers are motivated to investigate and employ alternative methods to satisfy the timing and physical design performance targets. Such novel methods for the timing and synchronization of complex circuitry are developed in this dissertation and analyzed for performance and applicability.Mainstream integrated circuit design flow is normally tuned for zero clock skew, edge-triggered circuit design. Non-zero clock skew or multi-phase clock synchronization is seldom used because the lack of design automation tools increases the length and cost of the design cycle. For similar reasons, level-sensitive registers have not become an industry standard despite their superior size, speed and power consumption characteristics compared to conventional edge-triggered flip-flops.In this dissertation, novel design and analysis techniques that fully automate the design and analysis of non-zero clock skew circuits are presented. Clock skew scheduling of both edge-triggered and level-sensitive circuits are investigated in order to exploit maximum circuit performances. The effects of multi-phase clocking on non-zero clock skew, level-sensitive circuits are investigated leading to advanced synchronization methodologies. Improvements in the scalability of the computational timing analysis process with clock skew scheduling are explored through partitioning and parallelization.The integration of the proposed design and analysis methods to the physical design flow of integrated circuits synchronized with a next-generation clocking technology-resonant rotary clocking technology-is also presented. Based on the design and analysis methods presented in this dissertation, a computer-aided design tool for the design of rotary clock synchronized integrated circuits is developed