3,673 research outputs found
UAV/UGV Autonomous Cooperation: UAV Assists UGV to Climb a Cliff by Attaching a Tether
This paper proposes a novel cooperative system for an Unmanned Aerial Vehicle
(UAV) and an Unmanned Ground Vehicle (UGV) which utilizes the UAV not only as a
flying sensor but also as a tether attachment device. Two robots are connected
with a tether, allowing the UAV to anchor the tether to a structure located at
the top of a steep terrain, impossible to reach for UGVs. Thus, enhancing the
poor traversability of the UGV by not only providing a wider range of scanning
and mapping from the air, but also by allowing the UGV to climb steep terrains
with the winding of the tether. In addition, we present an autonomous framework
for the collaborative navigation and tether attachment in an unknown
environment. The UAV employs visual inertial navigation with 3D voxel mapping
and obstacle avoidance planning. The UGV makes use of the voxel map and
generates an elevation map to execute path planning based on a traversability
analysis. Furthermore, we compared the pros and cons of possible methods for
the tether anchoring from multiple points of view. To increase the probability
of successful anchoring, we evaluated the anchoring strategy with an
experiment. Finally, the feasibility and capability of our proposed system were
demonstrated by an autonomous mission experiment in the field with an obstacle
and a cliff.Comment: 7 pages, 8 figures, accepted to 2019 International Conference on
Robotics & Automation. Video: https://youtu.be/UzTT8Ckjz1
Cooperative monocular-based SLAM for multi-UAV systems in GPS-denied environments
This work presents a cooperative monocular-based SLAM approach for multi-UAV systems that can operate in GPS-denied environments. The main contribution of the work is to show that, using visual information obtained from monocular cameras mounted onboard aerial vehicles flying in formation, the observability properties of the whole system are improved. This fact is especially notorious when compared with other related visual SLAM configurations. In order to improve the observability properties, some measurements of the relative distance between the UAVs are included in the system. These relative distances are also obtained from visual information. The proposed approach is theoretically validated by means of a nonlinear observability analysis. Furthermore, an extensive set of computer simulations is presented in order to validate the proposed approach. The numerical simulation results show that the proposed system is able to provide a good position and orientation estimation of the aerial vehicles flying in formation.Peer ReviewedPostprint (published version
Cooperative localization for mobile agents: a recursive decentralized algorithm based on Kalman filter decoupling
We consider cooperative localization technique for mobile agents with
communication and computation capabilities. We start by provide and overview of
different decentralization strategies in the literature, with special focus on
how these algorithms maintain an account of intrinsic correlations between
state estimate of team members. Then, we present a novel decentralized
cooperative localization algorithm that is a decentralized implementation of a
centralized Extended Kalman Filter for cooperative localization. In this
algorithm, instead of propagating cross-covariance terms, each agent propagates
new intermediate local variables that can be used in an update stage to create
the required propagated cross-covariance terms. Whenever there is a relative
measurement in the network, the algorithm declares the agent making this
measurement as the interim master. By acquiring information from the interim
landmark, the agent the relative measurement is taken from, the interim master
can calculate and broadcast a set of intermediate variables which each robot
can then use to update its estimates to match that of a centralized Extended
Kalman Filter for cooperative localization. Once an update is done, no further
communication is needed until the next relative measurement
Design, Construction, Energy Modeling, and Navigation of a Six-Wheeled Differential Drive Robot to Deliver Medical Supplies inside Hospitals
Differential drive mobile robots have been the most ubiquitous kind of robots for the last few decades. As each of the wheels of a differential drive mobile robot can be controlled, it provides additional flexibility to the end-users in creating new applications. These applications include personal assistance, security, warehouse and distribution applications, ocean and space exploration, etc. In a clinic or hospital, the delivery of medicines and patients’ records are frequently needed activities. Medical personnel often find these activities repetitive and time-consuming. Our research was to design, construct, produce an energy model, and develop a navigation control method for a six-wheeled differential drive robot designed to deliver medical supplies inside the hospital. Such a robot is expected to lessen the workload of medical staff. Therefore, the design and implementation of a six-wheeled differential drive robot with a password-protected medicine carrier were presented. This password-protected medicine carrier ensures that only the authorized medical personnel can receive medical supplies. The low-cost robot base and the medicine carrier were built in real life. Besides the actual robot design and fabrication, a kinematic model for the robot was developed, and a navigation control algorithm to avoid obstacles was implemented using MATLAB/Simulink. The kinematic modeling is helpful for the robot to achieve better energy optimization. To develop the object avoidance algorithm, we investigated the use of the Robot Operating System (ROS) and the Simultaneous Localization and Mapping (SLAM) algorithm for the implementation of the mapping and navigation of a robotic platform named TurtleBot 2. Finally, using the Webot robot simulator, the navigation of the six-wheeled mobile robot was demonstrated in a hospital-like simulation environment
Reactive exploration with self-reconfigurable systems
Modular self-reconfigurable robots (MSR) are robots composed of modules that translate over one another to permit reconfiguration and locomotion. This construction allows them to traverse a broader range of environments than legged or wheeled robots. MSR also posses the ability to split apart to parallelize their efforts or combine with each other to produce a larger robot capable of navigating more diverse terrain. In this paper we discuss a state-based reactive architecture for the distributed control of cooperative MSR teams in unknown environments. The MSR use local sensory data from the environment and a model of the team to select their actions. These actions include selecting a destination, aborting a route to a destination, splitting into two separate robots, and combining with another robot. In simulation, team-configuration, environmental complexity, and behavioral parameters are varied to discern the most effective circumstances for the architecture and MSR. Our results show that the best configuration of the system is highly dependent on the environment
Efficient exploration of unknown indoor environments using a team of mobile robots
Whenever multiple robots have to solve a common task, they need to coordinate their actions to carry out the task efficiently and to avoid interferences between individual robots. This is especially the case when considering the problem of exploring an unknown environment with a team of mobile robots. To achieve efficient terrain coverage with the sensors of the robots, one first needs to identify unknown areas in the environment. Second, one has to assign target locations to the individual robots so that they gather new and relevant information about the environment with their sensors. This assignment should lead to a distribution of the robots over the environment in a way that they avoid redundant work and do not interfere with each other by, for example, blocking their paths. In this paper, we address the problem of efficiently coordinating a large team of mobile robots. To better distribute the robots over the environment and to avoid redundant work, we take into account the type of place a potential target is located in (e.g., a corridor or a room). This knowledge allows us to improve the distribution of robots over the environment compared to approaches lacking this capability. To autonomously determine the type of a place, we apply a classifier learned using the AdaBoost algorithm. The resulting classifier takes laser range data as input and is able to classify the current location with high accuracy. We additionally use a hidden Markov model to consider the spatial dependencies between nearby locations. Our approach to incorporate the information about the type of places in the assignment process has been implemented and tested in different environments. The experiments illustrate that our system effectively distributes the robots over the environment and allows them to accomplish their mission faster compared to approaches that ignore the place labels
Biologically Inspired Intelligence with Applications on Robot Navigation
Biologically inspired intelligence technique, an important embranchment of series on computational intelligence, plays a crucial role for robotics. The autonomous robot and vehicle industry has had an immense impact on our economy and society and this trend will continue with biologically inspired neural network techniques. In this chapter, multiple robots cooperate to achieve a common coverage goal efficiently, which can improve the work capacity, share the coverage tasks, and reduce the completion time by a biologically inspired intelligence technique, is addressed. In many real-world applications, the coverage task has to be completed without any prior knowledge of the environment. In this chapter, a neural dynamics approach is proposed for complete area coverage by multiple robots. A bio-inspired neural network is designed to model the dynamic environment and to guide a team of robots for the coverage task. The dynamics of each neuron in the topologically organized neural network is characterized by a shunting neural equation. Each mobile robot treats the other robots as moving obstacles. Each robot path is autonomously generated from the dynamic activity landscape of the neural network and the previous robot position. The proposed model algorithm is computationally simple. The feasibility is validated by four simulation studies
- …