車車間通信のための分散協調ダイバーシチの研究

In recent years, intelligent transportation system (ITS) is well known as an effective way to provide road safety and comfortable driving. In vehicular communications, the current standards can be applied for safety related message exchange but in the future world, other new applications like autonomous controlled vehicles require more reliability and capacity with small delay. Moreover, multi-hop data delivery for emergency situations on road is not explicitly supported. Vehicular communications have some attractive characteristics such as constrained mobility along a predetermined road and predictability of vehicle\u27s position, etc. However, network topology changes frequently and very fast due to vehicle mobility. As a result, inter-vehicle connectivity can be impacted significantly. Moreover, the line-of-sight signal components are often blocked by obstacles as buildings at intersections or trucks on highway. Consequently, signal attenuation is large. Therefore, multi-hop data delivery in vehicle-to-vehicle communications with high reliability and small delay should be investigated. In wireless communications, cooperative communications are widely known as a technique allowing single-antenna nodes to reap the benefits of the conventional MIMO systems. By using distributed intermediate nodes, cooperative communications can obtain the same diversity gain benefits as conventional MIMO systems without requiring multiple antennas on the same node, which is also known as distributed cooperative diversity technique. In the cooperative diversity, space-time block code (STBC) is often applied because the diversity gain can be obtained without channel state information (CSI) at the transmitter. In addition, this encoding scheme can achieve both full diversity order and full data transmission rate with simple decoding algorithm at the receiver. However, in multi-hop relay communications, it is di cult to establish the path route from the source node to the destination node with selecting the efficient cooperative relays. The existing routing protocols in MANETs are not suitable for most applications in multi-hop vehicular communications due to the distinctive characteristics of V2V communications. This is because in these routing protocols, one or multiple routes from a source node to a particular destination node should be discovered before transmitting data packet. Consequently, these protocols are not suitable for the scenarios with more than one destination node. Furthermore, problems of redundant broadcast messages and the broadcast storm can make the design of routing protocols further complicated. However, in order to achieve high reliability for wireless multi-hop communications, the efficient cooperative relays must be selected to forward the packet in each hop. Distributed STBC encoding should be also applied to obtain higher cooperative diversity gain. In addition, the number of transmitted packet and the power consumption in network must be reduced while still maintaining the performance improvement of system, which can reduce the mutual interference in the shared radio channel. Therefore, in order to meet the requirements, transmission methods are proposed in this thesis as follows. In proposal 1, a method of cooperative diversity transmission is proposed to reduce the power consumption normalized by one data packet transmission power consumption with keeping the performance improvement for wireless multi-hop ad-hoc networks. The normalized power consumption is reduced by limiting the number of transmitting relay nodes in each hop and the number of repetition of the same data packet transmission at each node, which in turn makes the reduction of the number of transmitted packets in network. As a result, this can also lead to the reduction of interferences and better efficiency frequency utilization in network. More specifically, a relay selection procedure is proposed to select the two relays with high contribution according to the transmission direction in each hop by installing a new timer at each node and using control packets. The timer is also used to assign the STBC encoding pattern to the two selected relays in order to obtain higher cooperative diversity gain. In proposal 2, a cooperative diversity transmission method for wireless multi-hop relay V2V communications is proposed to disseminate emergency messages in the emergency situations. In this method, we consider to exploit the attractive characteristics of the constrained mobility and predictability in vehicular communications. In order to obtain higher cooperative diversity gain, a group of distributed vehicle stations which have high contribution according to the transmission direction is selected to forward the same data packet simultaneously to the further vehicle stations. This relay selection algorithm is based-on position, speed and movement direction, combining with the digital road map equipped on the vehicles. The STBC encoding is also used at the selected group of distributed vehicle relays. Moreover, in order to manage the transmission of whole network in each hop, a master vehicle station is selected by installing another new timer at each vehicle station and using control packets in each hop. From the simulation results, we can confirm that the proposed methods can reduce the power consumption normalized by one data packet transmission power consumption and the redundant broadcast packets significantly with keeping the improvement of packet loss probability by limiting the number of repetition of packet transmission at each node and selecting the only distributed relays with high contribution according to the transmission direction. As a result, these methods can achieve high reliability and partly meet the requirements of ITS system in the future.電気通信大学201

Distributed Cooperative Relaying Based on Space-Time Block Code: System Description and Measurement Campaign

In cooperative relaying, intermediate stations are required to enhance the end-to-end transmission performance. The performance of the cooperative relaying scheme has been investigated theoretically and via computer simulations. However, cooperative relaying using transmit diversity techniques in actual environments has not been investigated thus far. This paper presents an experimental system for distributed cooperative relaying using space-time block code and evaluations of its transmission performances in real propagation channels. To this end, four wireless stations-specifically, one source, two relays, and one destination-were developed using analog transceivers and field-programmable gate arrays for real-time digital signal processing. Sample timing and frequency synchronizations among the four wireless stations were established by using the received signals as a reference. The end-to-end error performance of distributed cooperative relaying was compared to those of noncooperative relaying schemes, and the performances of three relaying schemes were evaluated quasisimultaneously in terms of their cumulative distribution functions of the bit-error ratios (BERs). The experimental results indicated that the BER performance of the two-hop distributed cooperative relaying scheme was substantially superior to those of noncooperative two-hop relaying schemes, including a route diversity scheme

Design Of Vehicular Communication Systems Employing Physical Layer Network Coding Over Cascaded Fading Channels

Tez (Doktora) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2017Thesis (Ph.D.) -- İstanbul Technical University, Institute of Science and Technology, 2017İnsandan insana ses taşıma odaklı ikinci nesil (2nd Generation, 2G) mobil haberleşme teknolojilerinin kaydettiği başarıdan sonra telsiz iletişim alanındaki eğilimler insandan-makinaya olarak adlandırılan veri taşıma odaklı telsiz iletişim teknolojilerine (3rd Generation, 3G) doğru yönelmiştir. Bu veri taşıma odaklı iletişim konsepti ile birlikte son kullanıcılar multi-media mesajlaşma, internet erişimi, e-ticaret ve video paylaşımı gibi çok çeşitli telsiz iletişim servislerine kavuşma imkanı buldular. Telsiz iletişimdeki başarılı ve hızlı ilerlemenin bir sonucu olarak günümüzde bu alanda yapılan araştırma-geliştirme çalışmalarının yönü yüksek veri iletim hızları (>100Mb/s) ve daha yüksek bant-verimliliği (>10b/s) gerektiren makineden-makineye (Mactine-to-Machine, M2M) telsiz iletişime doğru yönelmiş bulunmaktadır. M2M telsiz iletişiminde bir araştırma/uygulama alanı araçtan-nesnelere (Vehicle-to-things, V2X) haberleşmedir. Araçtan araca (Vehicle-to-Vehicle, V2V) ve araçtan yol kenarındaki baz istasyonuna (Vehicle-to-Infrastructure, V2I) olmak üzere iki haberleşme sistemini birlikte içeren V2X haberleşme sistemleri günümüzde özellikle büyük metropollerde günlük hayatı pek çok yönden olumsuz etkileyen trafik kaynaklı problemlere karşı getirdiği çözüm önerileri nedeniyle üniversitlerde teorik çalışmalar yapan araştırmacıların yanı sıra, resmi kurumların, standartları belirleyen organizasyonların ve özellille otomotiv ve bilişim endüstrisindeki şirketlerin gittikçe artan dikkatini çekmeyi başarmıştır. Araçlar arası haberleşme teknolojilerinin gelişimine ivme kazandıran önemli gelişmelere bakılacak olursa; 1999 yılında ABD’de Federal Communication Comission (FCC) 5.9GHz frekans bandında 75MHz’lik bir frekans bandının V2X haberleşme için kullanımını onaylamıştır. 2008 yılında ise Avrupa haberleşme standardları enstitüsü (European Telecommunication Standards Institute) yine 5.9GHz frekans bandında 30Mhz’lik bir bandın bu amaçla kullanılmasını önermiştir. FCC’nin 2003 yılında ITS (Intelligent Transportation Systems) uygulamalarında kullanılacak haberleşme birimleri için yayımladığı rapor ve talebin ardından DSRC (Dedicated Short Range Communication) olarak adlandırılan V2X haberleşme sistemlerinin standardizasyonu için çalışmalar başlamış ve 2004 yılında IEEE 802.11standardı temel alınarak geliştirilen IEEE 802.11p standardı WAVE (Wireless Access in Vehicular Environments) olarak da bilinen adıyla 2010 yılında kabul edilmiştir. Bugün artık pek çok üniversitede çeşitli araştırma grupları V2X haberleşme üzerine akademik çalışmalar yürütürken endüstriyel seviyede ise Avrupa’da örneğin büyük ölçekli Avrupa Birliği projeleri olarak CAR2CAR Communication Corsortium, Secure Vehicular Communication ve NEARCTIS yürütülmektedir. Amerika’da ise ulaştırma bakanlığının desteklediği IntelliDrive projesi ile güvenlik, mobil iletişim ve çevre koruma amaçlı hedefler doğrultusunda trafik altyapısı, araçlar ve yolcuların mobil haberleşme cihazları arasında haberleşmeyi sağlayacak bir telsiz iletişim ağı alt yapısı kurma çalışmaları sürdürülmektedir. Benzer çalışmalar Japon Otomobil Teknolojileri Araştırma Enstitüsü JARI tarafından da yapılmaktadır. Yine V2V haberleşmenin trafik güvenliğini arttırmadaki öneminin anlaşılmasından sonra lider otomobil üreticisi firmalar “Crash Avoidance Metrics Partnership” adını verdikleri proje için ortak çatı altında biraraya gelmişlerdir. Kısaca belirtilmek istenirse, telsiz iletişim alanında V2X haberleşme yeni ama oldukça önemli bir çalışma alanı olarak görülmektedir. Günümüz telsiz haberleşme teknolojilerinden biri olan araçtan araca haberleşme, trafik verimliliğini arttırma, kazaların azaltılması ve trafikte güvenli sürüş konulara çözümler sağlayacak akıllı taşıma sistemlerinin gerçeklenmesinde çekirdek teknoloji konumundadır. Hücresel haberleşme ile karşılaştırıldığında, V2V haberleşme bazı yeni zorlukları içerir. V2V haberleşme kanallarının istatistiksel özellikleri hücresel telsiz haberleşme kanallarının istatistiksel özelliklerinden farklıdır. Bu nedenle, Rayleigh, Rician ve Nakagami-m gibi iyi bilinen hücresel haberleşme kanal modelleri V2V haberleşme kanallarındaki sönümlemeyi modellemek için uygun değildir. Yapılan saha ölçümlerinden görüldüğü üzere, V2V haberleşme kanallarında kanal kazancı, hareketli kaynaklar etrafında, her biri ayrı bir işaret kaynağı gibi davranan birbirinden bağımsız saçıcı gupların oluşturduğu sanal kanalların kanal kazançlarının çarpımından meydana gelmektedir. Kanal kazancının bu çarpımsallık niteliğinden dolayı V2V haberleşme kanalları kaskad sönümlemeli kanal modeli olarak adlandırılan bir grup kanal modeli ile modellenmelidirler. V2V haberleşmede karşılaşılan zorlukların bir nedeni, gerek haberleşen araçların gerekse onların etrafındaki diğer araçların yüksek hızlardaki hareketliliği nedeniyle haberleşme ortamının çevresel olarak çok hızlı değişmesidir. Bunun yanısıra araç antenlerinin görece düşük yükseklikte olmasının da etkisiyle, özellikle yerleşim birimleri içindeki yoğun trafik şartları düşünüldüğünde, haberleşen araçlar arasında çoğu zaman doğrudan görüş olmayacaktır. Bu da iletişimin sürekliliği ve güvenilirliği açısından işbirlikli haberleşmeyi kaçınılmaz kılmaktadır. Ancak doğrudan haberleşmeye nazaran daha fazla zaman dilimi gereksinimi işbirlikli sistemlerin temel dezavantajıdır. Veri iletim hızında kayba neden olan bu dezavantajı yok etmenin bir yolu, iki haberleşme biriminin aynı zaman aralığında aynı röle üzerinden veri aktarmasına imkan tanıyan fiziksel katman ağ kodlama (Physical Layer Network Coding, PLNC) tekniğidir. Ani gelişen durumların çok sayıda kullanıcıya kısa sürede bildirilmesini gerektirecek trafik içi haberleşmede PLNC tekniği yüksek başarımlı V2V haberleşme sistemlerinin tasarımında önemli bir rol oynayacaktır. Bu tezde sunulan çalışmalar üç grupta ele alınabilir. Birinci gruptaki ilk çalışmada tek antenli tek röleli ve röle üzerinde sabit kazançlı kuvvetlendir-ve-aktar tekniği kullanılarak PLNC yapılan bir işbirlikli V2V haberleşme sistemi tasarlanmıştır. Sistemin performans analizleri kaskad Nakagami-m kanal modeli varsayımı altında yapılmış olup bu kanal modeli, araçlar arası haberleşmeye uygun olan çift Rayleigh, kaskad Rayleigh, çift Nakagami-m ve genelleştirilmiş-K kanal modellerinin yanı sıra geleneksel hücresel haberleşme kanal modellerini de kapsamaktadır. Dolayısıyla bu çalışmada elde edilen sonuçlar bu kanal modelleri için de geçerlidir. Sistemin hata performans analizleri yapılırken öncelikle uçtan-uca işaret gürültü oranına ait birikimsel olasılık dağılım fonksiyonu kapalı formda elde edilmiş, ardından bu dağılım fonksiyonu kullanılarak sistemin servis kesinti olasılığı ve çeşitli modülasyon tipleri için sembol hata olasılığı ifadeleri kapalı formda bulunmuştur. Bu analizlerin bir devamı olarak, birinci grupta yapılan ikinci çalışmada ise, kaynaklarda öz-girişim işaretinin tam olarak yok edilemediği durumlar için yine tek antenli tek röleli rölede sabit kazançlı kuvvetlendir-ve-aktar tekniği kullanılarak PLNC yapılan sistemin performans analizi kaskad ve hızlı sönümlemeli Rayleigh kanal varsayımı altında yapılmış ve sisteme ait servis kesinti olasılığı ifadesi kapalı formda elde edilerek öz girişimin sistem performansına etkileri incelenmiştir. Tezde yer alan ikinci grup çalışmada, çok girişli çok çıkışlı (multiple input multiple output, MIMO) bir V2V haberleşme sistemi tasarlanmıştır. Sistemde birden çok röle olup kaynaklar ve tüm röleler çok antenlidir. Ayrıca röleler değişken kazançlı kuvvetlendir-ve-aktar tekniği uygulayarak PLNC yapmaktadır. Bu çalışmada da kaskad Nakagami-m kanal modeli kullanıldığından elde edilen sonuçlar yukarıda bahsedilen diğer kaskad veya kaskad olmayan kanal modelleri için de geçerlidir. Burada yapılan analizler ile tüm sistemin servis kesinti performansı kaynakların ortak servis kesinti olasılıkları cinsinden ifade edilerek bu olasılık tek katlı integral formunda bulunmuştur. Ardından servis kesinti olasılığı için alt ve üst sınır ifadeleri kapalı formda elde edilmiştir. Bulunan sınır ifadeleri aracılığıyla sistemde elde edilebilecek çeşitleme derecesi, röle sayısı, kaynak ve rölelerde kullanılan anten sayıları ve kanalların kaskadlık dereceleri ve sönümleme parametrelerinin aldığı değerlere bağlı olarak sistem parametreleri cinsinden ifade edilmiştir. Tasarlanan bu sistem ile ortak anten ve röle seçimi yapılarak V2V haberleşme sistemlerinin performansının daha da iyileştirilebileceği gösterilmiştir. Tezde yapılan üçüncü çalışmada PLNC yapılan bir çok antenli çok röleli V2V haberleşme sisteminde uzay-zaman kafes kodlama tekniği kullanılarak sistem performansının daha da iyileştirilmesi sağlanmıştır. Bu amaçla öncelikle sistemin çiftsel hata olasılığı için bir üst sınır ifadesi çift Rayleigh sönümlemeli kanal varsayımı için elde edilmiştir. Daha sonra bu olasılığı en küçük yapacak kodların inşaası için yeni bir kod tasarım ölçütü türetilmiş ve bu ölçüt kullanılarak çift Rayleigh sönümlemeli kanallarda PLNC tekniği kullanan MIMO V2V haberleşme sistemler için 4 ve 8 durumlu yeni uzay-zaman kafes kodları bulunmuştur.As a current state-of-the-art in wireless communications, Vehicle-to-Vehicle (V2V) communications is the core technology to build the intelligent transportation infrastructures promising the solutions to the issues such as traffic efficiency increasing, accident reduction and safety improvements. In comparison with the cellular wireless communication, there are some new challenges within the V2V communication. The statistical properties of the V2V communication channels differ from those of the cellular channels. Thereby, well known cellular channel models such as Rayleigh, Rician and Nakagami-m are not appropriate to simulate the fading in V2V communication channels. Field measurements reveal that V2V communication channels can be modeled by a class of channel models where the gain is obtained by multiplying the gains of virtual channels produced by each individual scattering group around that behaves as an independent signal source. Due to their multiplicativity nature, V2V communication channels are named as cascaded fading channels. A major challenge in V2V communications is that the physical environment is unsettled due to the mobility of the wireless units and other vehicles around these units. Additionally, the vehicle antennas have relatively lower heights. Therefore, especially considering the traffic in urban areas, most of the time there will be no line-of-sight between the communicating vehicles. This makes cooperative communications inevitable for seamless and reliable communication among the moving vehicles. And yet, compared to non-cooperative communication, the cooperation protocols require more time slots, which results in a decrease in data transmission rate. A method to cope with this drawback is physical layer network coding (PLNC) providing the simultaneous data transmissions of the vehicles via the same relay. The PLNC method will play an important role in the design of the high performance V2V communication systems serving in the heavy traffic conditions when a large number of users need to be notified about suddenly changing situations. Studies presented in this thesis can be divided into three categories. In the first category, a cooperative V2V communication system employing PLNC using fixed gain amplify-and-forward technique is proposed and its outage and error performance analysis is investigated. Analytic results are derived under the cascaded Nakagami-m fading channel model assumption covering double Rayleigh, cascaded Rayleigh, double Nakagami-m, generalized-K and conventional cellular channel models as well. Therefore, the results obtained by this work are also valid for all these channel models. In the error performance investigation of the proposed system, first, exact cumulative density function of the end to end signal to noise ratio is derived. Then, using this cumulative density function, the exact closed-form outage probability is obtained. Then the exact closed-form symbol error rate expression for various modulation types is derived. As a continuation of this work, the performance analysis of the same system is investigated for not only cascaded but also fast fading Rayleigh channels in the presence of the self-interference. Thus the exact closed-form outage probability expression is obtained, and it is shown that the self-interference may cause the error floor in the performance of the network coded communication systems. In the second category, a multiple input multiple output (MIMO) V2V communication system is proposed. In this proposed system, all source and relay vehicles have multiple antennas while the relays employ the PLNC method using variable gain amplify-and-forward technique. The analytic results are derived for the cascaded Nakagami-m fading channels, and therefore the result of this work are held for the cascaded and non-cascaded channels, as mentioned above. Furthermore, the performance of the system is evaluated in terms of joint outage probability of the sources, and the exact outage probability expression is obtained in a single integral form while the upper and the lower bounds of the outage probability are obtained in the closed-form. Moreover, asymptotic diversity order is quantified as a function of the number of the relays, the number of the antennas at the sources and the relays, and the channel parameters which are cascading degree and fading parameter values. Within this system, it is shown that the service outage probability performance can be enhanced by employing joint antenna and relay selection. In the third category, PLNC and space-time trellis coding (STTC) techniques are combined to improve the error performance of a multi-antenna multi-relay V2V system. The upper bound expression of the pairwise error probability of the system is evaluated for double Rayleigh fading channels. Then using the upper bound expression, a novel code-design criterion is derived for cascaded fading channels. Then, by using this new criterion, a novel STTCs with 4 and 8 states are proposed for MIMO V2V PLNC systems.DoktoraPh.D

231202

This work presents the performance analysis of space-time block codes (STBCs) for vehicle-to-vehicle (V2V) fast-fading channels in scenarios with modified line-of-sight (LOS). The objective is to investigate how the V2V MIMO (multiple-input multiple-output) system performance is influenced by two important impairments: deterministic ground reflections and an increased Doppler frequency (time-variant channels). STBCs of various coding rates (using an approximation model) are evaluated by assuming antenna elements distributed over the surface of two contiguous vehicles. A multi-ray model is used to study the multiple constructive/destructive interference patterns of the transmitted/received signals by all pairs of Tx–Rx antenna links considering ground reflections. A double scattering model is used to include the effects of stochastic channel components that depend on the Doppler frequency. The results show that STBCs are capable of counteracting fades produced by destructive self-interference components across a range of inter-vehicle distances and for a range of Doppler frequency values. Notably, the effectiveness of STBCs in deep fades is shown to outperform schemes with exclusive receive diversity, despite the interference created by the loss of orthogonality in time-varying channels with a moderate increase of Doppler frequency (mainly due to higher vehicle speeds, higher frequency or shorter time slots). Higher-order STBCs with rate losses are also evaluated using an approximation model, showing interesting gains even for low coding rate performance, particularly when accompanied by a multiple antenna receiver. Overall, these results can shed light on how to exploit transmit diversity in time-varying vehicular channels with modified LOS.info:eu-repo/semantics/publishedVersio

On the Performance Analysis of Cooperative Vehicular Communication

Vehicular networking is envisioned to be a key technology area for significant growth in the coming years. Although the expectations for this emerging technology are set very high, many practical aspects remain still unsolved for a vast deployment of vehicular networks. This dissertation addresses the enabling physical layer techniques to meet the challenges in vehicular networks operating in mobile wireless environments. Considering the infrastructure-less nature of vehicular networks, we envision cooperative diversity well positioned to meet the demanding requirements of vehicular networks with their underlying distributed structure. Cooperative diversity has been proposed as a powerful means to enhance the performance of high-rate communications over wireless fading channels. It realizes spatial diversity advantages in a distributed manner where a node uses others antennas to relay its message creating a virtual antenna array. Although cooperative diversity has garnered much attention recently, it has not yet been fully explored in the context of vehicular networks considering the unique characteristics of vehicular networks, this dissertation provides an error performance analysis study of cooperative transmission schemes for various deployment and traffic scenarios. In the first part of this dissertation, we investigate the performance of a cooperative vehicle-to-vehicle (V2V) system with amplify-and-forward relaying for typical traffic scenarios under city/urban settings and a highway area. We derive pairwise error probability (PEP) expressions and demonstrate the achievable diversity gains. The effect of imperfect channel state information (CSI) is also studied through an asymptotical PEP analysis. We present Monte-Carlo simulations to confirm the analytical derivations and present the error rate performance of the vehicular scheme with perfect and imperfect-CSI. In the second part, we consider road-to-vehicle (R2V) communications in which roadside access points use cooperating vehicles as relaying terminals. Under the assumption of decode-and-forward relaying, we derive PEP expressions for single-relay and multi-relay scenarios. In the third part, we consider a cooperative multi-hop V2V system in which direct transmission is not possible and investigate its performance through the PEP derivation and diversity gain analysis. Monte-Carlo simulations are further provided to con firm the analytical derivations and provide insight into the error rate performance improvement

220605

This work presents a capacity analysis of Space-Time Block Codes (STBC) for Vehicle-to-Vehicle (V2V) communication in Line-of-Sight (LOS). The aim is to assess how this type of coding performs when the V2V LOS channel is influenced by ground reflections. STBCs of various coding rates are evaluated using antenna elements distributed over the surface of two contiguous vehicles. A multi-ray tracing tool is used to model the multiple constructive/destructive interference patterns of the transmitted/received signals by all pairs of Tx-Rx antenna links. Simulation results show that STBCs are capable of counteracting fades produced by the destructive self-interference components across a range of inter-vehicle distances. Notably, the effectiveness in deep fades is shown to outperform schemes with exclusive receive diversity. Higher-order STBCs with rate losses are also evaluated, showing interesting gains even for low coding rate performance, particularly, when accompanied by a multiple antenna receiver. Overall, these results can shed light on how to exploit transmit diversity in slow fading vehicular channels.info:eu-repo/semantics/publishedVersio

Contributions to the Performance Analysis of Intervehicular Communications Systems and Schemes

RÉSUMÉ Le but des systèmes de communication intervéhicule (Inter-Vehicle Communication – IVC) est d'améliorer la sécurité de conduite en utilisant des capteurs et des techniques de communication sans fil pour être en mesure de communiquer mutuellement sans aucune intervention extérieure. Avec l'utilisation de ces systèmes, les communications véhicule à véhicule (V2V) peuvent être plus efficaces dans la prévention des accidents et la décongestion de la circulation que si chaque véhicule travaillait individuellement. Une des solutions proposées pour les systèmes IVC est l’utilisation des systèmes de communication coopérative, qui en principe, augmentent l'efficacité spectrale et énergétique, la couverture du réseau, et réduit la probabilité de défaillance. La diversité d'antenne (entrées multiples sorties multiples « Multiple-Input Multiple-Output » ou MIMO) peut également être une alternative pour les systèmes IVC pour améliorer la capacité du canal et la diversité (fiabilité), mais en échange d’une complexité accrue. Toutefois, l'application de telles solutions est difficile, car les communications sans fil entre les véhicules sont soumises à d’importants effets d'évanouissements des canaux appelés (canaux sujets aux évanouissements de n*Rayleigh, « n*Rayleigh fading channels»), ce qui conduit à la dégradation des performances. Par conséquent, dans cette thèse, nous proposons une analyse de la performance globale des systèmes de transmission coopératifs et MIMO sur des canaux sujets aux évanouissements de n*Rayleigh. Cette analyse permettra d’aider les chercheurs pour la conception et la mise en œuvre de systèmes de communication V2V avec une complexité moindre. En particulier, nous étudions d'abord la performance de la sélection du relais de coopération avec les systèmes IVC, on suppose que la transmission via « Amplify-and-Forward» (AF) ou bien «Decode-and-Forward» (DF) est assurée par N relais pour transférer le message de la source à la destination. La performance du système est analysée en termes de probabilité de défaillance, la probabilité d'erreur de symbole, et la capacité moyenne du canal. Les résultats numériques démontrent que la sélection de relais réalise une diversité de l'ordre de (d≈mN/n) pour les deux types de relais, où m est un paramètre évanouissement de Rayleigh en cascade. Nous étudions ensuite la performance des systèmes IVC à sauts multiples avec et sans relais régénératifs. Dans cette étude, nous dérivons des expressions approximatives pour la probabilité de défaillance et le niveau d’évanouissement lorsque la diversité en réception basée sur le ratio maximum de combinaison (MRC) est employée. En outre, nous analysons la répartition de puissance pour le système sous-jacent afin de minimiser la probabilité globale de défaillance. Nous montrons que la performance des systèmes régénératifs est meilleure que celle des systèmes non régénératifs lorsque l’ordre de cascade n est faible, tandis qu’ils ont des performances similaires lorsque n est élevé. Ensuite, nous considérons le problème de la détection de puissance des signaux inconnus aux n* canaux de Rayleigh. Dans ce travail, de nouvelles expressions approximatives sont dérivées de la probabilité de détection moyenne avec et sans diversité en réception MRC. En outre, la performance du système est analysée lorsque la détection de spectre coopérative (CSS) est considérée sous diverses contraintes de canaux (par exemple, les canaux de communication parfaits et imparfaits). Les résultats numériques ont montré que la fiabilité de détection diminue à mesure que l'ordre n augmente et s’améliore sensiblement lorsque CSS emploie le schéma MRC. Il est démontré que CSS avec le schéma MRC maintient la probabilité de fausse alarme minimale dans les canaux d’information imparfaite plutôt que d'augmenter le nombre d'utilisateurs en coopération. Enfin, nous présentons une nouvelle approche pour l'analyse des performances des systèmes IVC sur n*canaux de Rayleigh, en utilisant n_T antennes d'émission et n_R antennes de réception pour lutter contre l'effet d’évanouissement. Dans ce contexte, nous évaluons la performance des systèmes MIMO-V2V basés sur la sélection des antennes d'émission avec un ratio maximum de combinaison (TAS/MRC) et la sélection combinant (TAS/SC). Dans cette étude, nous dérivons des expressions analytiques plus précises pour la probabilité de défaillance, la probabilité d'erreur de symbole, et l’évanouissement sur n*canaux Rayleigh. Il est montré que les deux régimes ont le même ordre de diversité maximale équivalent à (d≈mn_T n_R /n) . En outre, TAS / MRC offre un gain de performance mieux que TAS/ SC lorsque le nombre d'antennes de réception est plus que celle des antennes d’émission, mais l’amélioration de la performance est limitée lorsque n augmente.----------Abstract The purpose of intervehicular communication (IVC) systems is to enhance driving safety, in which vehicles use sensors and wireless communication techniques to talk to each other without any roadside intervention. Using these systems, vehicle-to-vehicle (V2V) communications can be more effective in avoiding accidents and traffic congestion than if each vehicle works individually. A potential solution can be implemented in this research area using cooperative communications systems which, in principle, increase spectral and power efficiency, network coverage, and reduce the outage probability. Antenna diversity (i.e., multiple-input multiple output (MIMO) systems) can also be an alternative solution for IVC systems to enhance channel capacity and diversity (reliability) but in exchange of an increased complexity. However, applying such solutions is challenging since wireless communications among vehicles is subject to harsh fading channels called ‘n*Rayleigh fading channels’, which leads to performance degradation. Therefore, in this thesis we provide a comprehensive performance analysis of cooperative transmission and MIMO systems over n*Rayleigh fading channels that help researchers for the design and implementation of V2V communication systems with lower complexity. Specifically, we first investigate the performance of cooperative IVC systems with relay selection over n*Rayleigh fading channels, assuming that both the decode-and-forward and the amplify-and-forward relaying protocols are achieved by N relays to transfer the source message to the destination. System performance is analyzed in terms of outage probability, symbol error probability, and average channel capacity. The numerical results have shown that the best relay selection approach achieves the diversity order of (d≈mN/n) where m is a cascaded Rayleigh fading parameter. Second, we investigate the performance of multihop-IVC systems with regenerative and non-regenerative relays. In this study, we derive approximate closed-form expressions for the outage probability and amount of fading when the maximum ratio combining (MRC) diversity reception is employed. Further, we analyze the power allocation for the underlying scheme in order to minimize the overall outage probability. We show that the performance of regenerative systems is better than that of non-regenerative systems when the cascading order n is low and they have similar performance when n is high. Third, we consider the problem of energy detection of unknown signals over n*Rayleigh fading channels. In this work, novel approximate expressions are derived for the average probability of detection with and without MRC diversity reception. Moreover, the system performance is analyzed when cooperative spectrum sensing (CSS) is considered under various channel constraints (e.g, perfect and imperfect reporting channels). The numerical results show that the detection reliability decreases as the cascading order n increases and substantially improves when CSS employs MRC schemes. It is demonstrated that CSS with MRC scheme keeps the probability of false alarm minimal under imperfect reporting channels rather than increasing the number of cooperative users. Finally, we present a new approach for the performance analysis of IVC systems over n*Rayleigh fading channels, using n_T transmit and n_R receive antennas to combat fading influence. In this context, we evaluate the performance of MIMO-V2V systems based on the transmit antenna selection with maximum ratio combining (TAS/MRC) and selection combining (TAS/SC) schemes. In this study, we derive tight analytical expressions for the outage probability, the symbol error probability, and the amount of fading over n*Rayleigh fading channels. It is shown that both schemes have the same maximum diversity order equivalent to (d≈mn_T n_R /n). In addition, TAS/MRC offers a better performance gain than TAS/SC scheme when the number of receive antennas is more than that of transmit antennas, but the performance improvement is limited as n increases

Robust Vehicular Communications Using the Fast-Frequency-Hopping-OFDM Technology and the MIMO Spatial Multiplexing

Vehicle-to-Vehicle communication is one of the more emerging technologies in the 21st century from either the comfortable transportation or safer transportation point of view. Vehicle-to-Vehicle communication has one crucial factor, which is the huge information to be shared among vehicles, such as the position, the road data. In such situation, the accurate information sharing process is the most important factor in order to make the vehicles operating in the most feasible way. This work proposes a more robust vehicle communication system to make the existing vehicle transportation system more efficient. In this paper, we propose a fast frequency hopping orthogonal frequency division multiplexing to mitigate the Doppler spread effect on our previously published clustering benchmark.  This benchmark contains both of a clustering weighting factor based stage and a multiparallel processing stage. This is in addition to modify the PHY layer of the existing IEEE 802.11p standard in order to impose Multiple Input Multiple Output for higher throughput purposes.The results show a noticeable stability compared to our previously published work. Furthermore, the results are almost exceeds the achieved results from the Lower-ID Distributed Clustering Algorithm (DCA) from both of the speed and communication range

Radio Communications

In the last decades the restless evolution of information and communication technologies (ICT) brought to a deep transformation of our habits. The growth of the Internet and the advances in hardware and software implementations modified our way to communicate and to share information. In this book, an overview of the major issues faced today by researchers in the field of radio communications is given through 35 high quality chapters written by specialists working in universities and research centers all over the world. Various aspects will be deeply discussed: channel modeling, beamforming, multiple antennas, cooperative networks, opportunistic scheduling, advanced admission control, handover management, systems performance assessment, routing issues in mobility conditions, localization, web security. Advanced techniques for the radio resource management will be discussed both in single and multiple radio technologies; either in infrastructure, mesh or ad hoc networks