Control plane handoff analysis for IP mobility

Seamless host mobility is vital to future network mobility, and has been an active research area for a long time. Much research focuses on the performance of the data plane. In this paper, we present comprehensive analyses on the control (signalling) plane in the IETF Mobile IPv6, and compare it with the IRTF Identifier-Locator Network Protocol (ILNP). The control plane behaviour is important in order to assess the robustness and scalability of the mobility protocol. ILNP has a different mobility model from Mobile IPv6: it isa host-based, end-to-end architecture and does not require additional network-layer entities. Hence, the control signals are exchanged only between the end systems. We provide model-based analyses for handoff signalling, and show that ILNP is more efficient than MIPv6 in terms of robustness and scalability. The analytical models we present could also be adapted for other mobility solutions, for comparative assessment.Postprin

Producer Mobility Support Schemes for Named Data Networking: A Survey

Mobile devices connectivity and data traffic growth requires scalable and efficient means of data distribution over the Internet. Thus, influenced the needs for upgrading or replacing the current Internet architecture to cater the situation as Named Data Networking (NDN) was proposed. NDN is clean-slate Internet architecture, proposed to replace IP with hierarchical named content that utilizes route aggregation to improve scalability and support mobility. Although, NDN provides supports for content consumer mobility with the help of catching capabilities, however, content producer faces many problems similar to mobility in IP architecture, such as, long handoff delay, unnecessary Interest packet losses and high bandwidth utilization. Hence, many concepts and schemes were proposed to address these problems. This paper reviewed and conceptually analyzed the schemes based on their fundamental design that broadly categorized into indirection-based approach, mapping-based approach, locator-based approach and control/data plane-based approach. In the review analysis, mapping-based approach schemes provide optimal path for packets delivery, high handoff delay Indirection-based and locator-based approach schemes provide normal handoff delay, but introduces tiangular routing path. The control/data plane-based approach schemes provide sub-optimal routing path and high handoff delay. The paper provided both strength and weakness of each scheme for further research

Performance Analysis of Multicast Mobility in a Hierarchical Mobile IP Proxy Environment

Mobility support in IPv6 networks is ready for release as an RFC, stimulating major discussions on improvements to meet real-time communication requirements. Sprawling hot spots of IP-only wireless networks at the same time await voice and videoconferencing as standard mobile Internet services, thereby adding the request for multicast support to real-time mobility. This paper briefly introduces current approaches for seamless multicast extensions to Mobile IPv6. Key issues of multicast mobility are discussed. Both analytically and in simulations comparisons are drawn between handover performance characteristics, dedicating special focus on the M-HMIPv6 approach.Comment: 11 pages, 7 figure

Flat Cellular (UMTS) Networks

Traditionally, cellular systems have been built in a hierarchical manner: many specialized cellular access network elements that collectively form a hierarchical cellular system. When 2G and later 3G systems were designed there was a good reason to make system hierarchical: from a cost-perspective it was better to concentrate traffic and to share the cost of processing equipment over a large set of users while keeping the base stations relatively cheap. However, we believe the economic reasons for designing cellular systems in a hierarchical manner have disappeared: in fact, hierarchical architectures hinder future efficient deployments. In this paper, we argue for completely flat cellular wireless systems, which need just one type of specialized network element to provide radio access network (RAN) functionality, supplemented by standard IP-based network elements to form a cellular network. While the reason for building a cellular system in a hierarchical fashion has disappeared, there are other good reasons to make the system architecture flat: (1) as wireless transmission techniques evolve into hybrid ARQ systems, there is less need for a hierarchical cellular system to support spatial diversity; (2) we foresee that future cellular networks are part of the Internet, while hierarchical systems typically use interfaces between network elements that are specific to cellular standards or proprietary. At best such systems use IP as a transport medium, not as a core component; (3) a flat cellular system can be self scaling while a hierarchical system has inherent scaling issues; (4) moving all access technologies to the edge of the network enables ease of converging access technologies into a common packet core; and (5) using an IP common core makes the cellular network part of the Internet

EVM as generic QoS trigger for heterogeneous wieless overlay network

Fourth Generation (4G) Wireless System will integrate heterogeneous wireless overlay systems i.e. interworking of WLAN/ GSM/ CDMA/ WiMAX/ LTE/ etc with guaranteed Quality of Service (QoS) and Experience (QoE).QoS(E) vary from network to network and is application sensitive. User needs an optimal mobility solution while roaming in Overlaid wireless environment i.e. user could seamlessly transfer his session/ call to a best available network bearing guaranteed Quality of Experience. And If this Seamless transfer of session is executed between two networks having different access standards then it is called Vertical Handover (VHO). Contemporary VHO decision algorithms are based on generic QoS metrics viz. SNR, bandwidth, jitter, BER and delay. In this paper, Error Vector Magnitude (EVM) is proposed to be a generic QoS trigger for VHO execution. EVM is defined as the deviation of inphase/ quadrature (I/Q) values from ideal signal states and thus provides a measure of signal quality. In 4G Interoperable environment, OFDM is the leading Modulation scheme (more prone to multi-path fading). EVM (modulation error) properly characterises the wireless link/ channel for accurate VHO decision. EVM depends on the inherent transmission impairments viz. frequency offset, phase noise, non-linear-impairment, skewness etc. for a given wireless link. Paper provides an insight to the analytical aspect of EVM & measures EVM (%) for key management subframes like association/re-association/disassociation/ probe request/response frames. EVM relation is explored for different possible NAV-Network Allocation Vectors (frame duration). Finally EVM is compared with SNR, BER and investigation concludes EVM as a promising QoS trigger for OFDM based emerging wireless standards.Comment: 12 pages, 7 figures, IJWMN 2010 august issue vol. 2, no.

On the Minimization of Handover Decision Instability in Wireless Local Area Networks

This paper addresses handover decision instability which impacts negatively on both user perception and network performances. To this aim, a new technique called The HandOver Decision STAbility Technique (HODSTAT) is proposed for horizontal handover in Wireless Local Area Networks (WLAN) based on IEEE 802.11standard. HODSTAT is based on a hysteresis margin analysis that, combined with a utilitybased function, evaluates the need for the handover and determines if the handover is needed or avoided. Indeed, if a Mobile Terminal (MT) only transiently hands over to a better network, the gain from using this new network may be diminished by the handover overhead and short usage duration. The approach that we adopt throughout this article aims at reducing the minimum handover occurrence that leads to the interruption of network connectivity (this is due to the nature of handover in WLAN which is a break before make which causes additional delay and packet loss). To this end, MT rather performs a handover only if the connectivity of the current network is threatened or if the performance of a neighboring network is really better comparing the current one with a hysteresis margin. This hysteresis should make a tradeoff between handover occurrence and the necessity to change the current network of attachment. Our extensive simulation results show that our proposed algorithm outperforms other decision stability approaches for handover decision algorithm.Comment: 13 Pages, IJWM

Analytical modelling solution of producer mobility support scheme for named data networking

Named Data Networking (NDN) is a clean-slate future Internet architecture proposed to support content mobility. However, content producer mobility is not supported fundamentally and faces many challenges such as, high handoff latency, signaling overhead cost and unnecessary Interest packet losses. Hence, many approaches indirection-based approach, mapping-based approach, locator-based approach and control/data plane-based approach were proposed to address these problems. Mapping-based and control/data plane-based approach deployed servers for name resolution serveces to provide optimal data path after handoff, but introduces high handoff latency and signalling overhead cost. Indirection-based and locator-based approach schemes provide normal handoff delay, but introduces sub-optimal or tiangular routing path. Therefore, there is needs to provide substantial producer mobility support that minimizes the handoff latency, signaling cost and improve data packets delivery via optimal path once a content producer relocates to new location. This paper proposed a scheme that provides optimal data path using mobility Interest packets and broadcasting strategy. Analytical investigation result shows that our proposed scheme outperforms existing approaches in terms of handoff latency, signaling cost and path optimization

SD-MCAN: A Software-Defined Solution for IP Mobility in Campus Area Networks

Campus Area Networks (CANs) are a subset of enterprise networks, comprised of a network core connecting multiple Local Area Networks (LANs) across a college campus. Traditionally, hosts connect to the CAN via a single point of attachment; however, the past decade has seen the employment of mobile computing rise dramatically. Mobile devices must obtain new Internet Protocol (IP) addresses at each LAN as they migrate, wasting address space and disrupting host services. To prevent these issues, modern CANs should support IP mobility: allowing devices to keep a single IP address as they migrate between LANs with low-latency handoffs. Traditional approaches to mobility may be difficult to deploy and often lead to inefficient routing, but Software-Defined Networking (SDN) provides an intriguing alternative. This thesis identifies necessary requirements for a software-defined IP mobility system and then proposes one such system, the Software-Defined Mobile Campus Area Network (SD-MCAN) architecture. SD-MCAN employs an OpenFlow-based hybrid, label-switched routing scheme to efficiently route traffic flows between mobile hosts on the CAN. The proposed architecture is then implemented as an application on the existing POX controller and evaluated on virtual and hardware testbeds. Experimental results show that SD-MCAN can process handoffs with less than 90 ms latency, suggesting that the system can support data-intensive services on mobile host devices. Finally, the POX prototype is open-sourced to aid in future research

An overview of internet engineering task force mobility management protocols: approaches and its challenges

In recent years, internet protocol mobility management has become one of the most popular research areas in networking. Mobility management protocols are in charge of preserving continuing communications as a user roam between different networks. All existing internet protocols (IP), like MIPv6, and PMIPv6, rely on a centralized mobility anchor to control mobile node traffic and signaling. The disadvantages of centralized mobility management (CMM) include ineffectiveness in handling massive volumes of traffic, poor scalability, wasteful use of network resources, and packet delay. When CMM is required to handle mobile media, which demands a huge amount of information and frequently needs quality of services (QoS) such as session continuance and reduced latency, these difficulties become apparent. It drives the need for distributed mobility management protocol (DMM) systems to manage the growing amount of mobile data, the overwhelming of this is video communication. DMM approaches could be regarded as an innovative and effective method to deal with mobility. An overview of the CMM protocol and its drawbacks are analyzed. This study examines the various DMM protocol techniques and their performance metrics are compared to highlight similarities and differences. The study reveals the network-based DMM protocol improves overall handoff time and packet loss