Fuzzy adaptive control of a two-wheeled inverted pendulum

Recently, the two-wheeled inverted pendulum has drawn the attention of robotic community in view of a plethora of applications, such as transport vehicles: Segway, teleconferencing robots, and electronic network-vehicle. As a widely-used personal transportation vehicle, a two-wheeled inverted pendulum robot has the advantages of small size and simple structure. Moreover, with the advent of modern control technology, these kinds of platforms with safety features and sophisticated control functions can be cost down, so that they have high potential to satisfy stringent requirements of various autonomous service robots with high speed. At the same time, it is of great interest from control point of view as the inverted pendulum is a complicated, strongly coupled, unstable and nonlinear system. Therefore, it is an ideal experimental platform for various control theories and experiments. To understand such a complex system, the Lagrangian equation has been introduced to develop a dynamic model. And following the mathematical model, linear quadratic regulator control and fuzzy adaptive method are proposed for upright stabilization, velocity control and position control of the system. However, sometimes these kinds of robots need to move on a slope, so an advanced linear quadratic regulator controller and a modified fuzzy adaptive controller have been proposed to achieve position control on a slope for the robot while stabilizing its body in balance. In addition, trajectory tracking control using proportional integral derivative control and sliding mode control with fuzzy adaptive backstepping method is also designed to make the robot autonomously navigate in two dimensional plane. Simulation results indicate that the proposed controllers are capable of providing appropriate control actions to steer the vehicle in desired manners. Then, a couple of real time experiments have been conducted to verify the the effectiveness of the developed control strategies

Development of a Two-Wheel Inverted Pendulum and a Cable Climbing Robot

The research work in this thesis constitutes two parts: one is the development and control of a Two-wheel inverted pendulum (TWIP) robot and the other is the design and manufacturing of a cable climbing robot (CCR) for suspension bridge inspection. The first part of this research investigates a sliding mode controller for self-balancing and stabilizing a two-wheel inverted pendulum (TWIP) robot. The TWIP robot is constructed by using two DC gear motors with a high-resolution encoder and zero backlashes, but with friction. It is a highly nonlinear and unstable system, which poses challenges for controller design. In this study, a dynamic mathematical model is built using the Lagrangian function method. And a sliding mode controller (SMC) is proposed for auto-balancing and yaw rotation. A gyro and an accelerometer are adopted to measure the pitch angle and pitch rate. The effect on the sensor’s installation location is analyzed and compensated, and the precision of the pose estimation is improved accordingly. A comparison of the proposed SMC controller with a proportional-integral-derivative (PID) controller and state feedback controller (SFC) with linear quadratic regulation (LQR) has been conducted. The simulation and experimental test results demonstrate the SMC controller outperforms the PID controller and SFC in terms of transient performance and disturbance rejection ability. In the second part of the research, a wheel-based cable climbing robotic system which can climb up and down the cylindrical cables for the inspection of the suspension bridges is designed and manufactured. Firstly, a rubber track climbing mechanism is designed to generate enough adhesion force for the robot to stick to the surface of a cable and the driving force for the robot to climb up and down the cable, while not too big to damage the cable. The climbing system includes chains and sprockets driven by the DC motors and adhesion system. The unique design of the adhesion mechanism lies in that it can maintain the adhesion force even when the power is lost while the system works as a suspension mechanism. Finally, a safe-landing mechanism is developed to guarantee the safety of the robot during inspection operations on cables. The robot has been fully tested in the inspection of Xili bridge, Guangzhou, P.R. China

Proceedings of the 2018 Canadian Society for Mechanical Engineering (CSME) International Congress

Published proceedings of the 2018 Canadian Society for Mechanical Engineering (CSME) International Congress, hosted by York University, 27-30 May 2018

A History of Materials and Technologies Development

The purpose of the book is to provide the students with the text that presents an introductory knowledge about the development of materials and technologies and includes the most commonly available information on human development. The idea of the publication has been generated referring to the materials taken from the organic and non-organic evolution of nature. The suggested texts might be found a purposeful tool for the University students proceeding with studying engineering due to the fact that all subjects in this particular field more or less have to cover the history and development of the studied object. It is expected that studying different materials and technologies will help the students with a better understanding of driving forces, positive and negative consequences of technological development, etc