Contactless, high resolution characterization of current and voltage waveforms within high power communication amplifiers

Characterisation of high-power communications-based amplifiers (PAs) has generated many thousands of research papers and much of this work assumes the transistors at the heart of these (PAs) to be a ‘large’ holistic entity. Given that high-power communications-based transistors are made up of multiple, parallel transistors on a single substrate, it is this intermediate scale range, within the periphery of the device, but much larger than the geometrical scale of the epitaxy and the lithography, that requires deeper investigation. Raman-based thermography may add a dimension of spatially varying heat dissipation but ‘lifting the bonnet’ of the transistor and making internal contactless measurements of current and voltage is the only way to fully account for the myriads of parasitic effects that have been observed by countless researchers. To date, however, very little research has been conducted on quantifying the individual spatial voltages within the transistor in order to fully characterise it. Miniaturised contactless current and voltage probes are theorised, designed, characterised and optimised in this thesis to deliver a robust and reliable means of transistor characterisation at these internal spatial dimensions. The contactless voltage probe presented in this work has a spatial resolution four times finer than the previously reported voltage probe, with a useful bandwidth up to 7 GHz and a controllable passive gain up to 20 dB at the desired operating frequency. The pinnacle of this thesis delivers a novel shielded contactless current probe, capable of high-resolution scanning, culminating in a ‘quasi-calibrated’ measurement of the distributed currents within a multi-finger LDMOS transistor operating at high power and high frequency. The spatial resolution of this shielded contactless current probe is 62.5 μm with 22.7 dB average rejection ratio to the electric field, and it has a broad bandwidth up to 9 GHz. To date, this type of contactless current measurement has not been reported elsewhere

The 2023 terahertz science and technology roadmap

Terahertz (THz) radiation encompasses a wide spectral range within the electromagnetic spectrum that extends from microwaves to the far infrared (100 GHz–∼30 THz). Within its frequency boundaries exist a broad variety of scientific disciplines that have presented, and continue to present, technical challenges to researchers. During the past 50 years, for instance, the demands of the scientific community have substantially evolved and with a need for advanced instrumentation to support radio astronomy, Earth observation, weather forecasting, security imaging, telecommunications, non-destructive device testing and much more. Furthermore, applications have required an emergence of technology from the laboratory environment to production-scale supply and in-the-field deployments ranging from harsh ground-based locations to deep space. In addressing these requirements, the research and development community has advanced related technology and bridged the transition between electronics and photonics that high frequency operation demands. The multidisciplinary nature of THz work was our stimulus for creating the 2017 THz Science and Technology Roadmap (Dhillon et al 2017 J. Phys. D: Appl. Phys. 50 043001). As one might envisage, though, there remains much to explore both scientifically and technically and the field has continued to develop and expand rapidly. It is timely, therefore, to revise our previous roadmap and in this 2023 version we both provide an update on key developments in established technical areas that have important scientific and public benefit, and highlight new and emerging areas that show particular promise. The developments that we describe thus span from fundamental scientific research, such as THz astronomy and the emergent area of THz quantum optics, to highly applied and commercially and societally impactful subjects that include 6G THz communications, medical imaging, and climate monitoring and prediction. Our Roadmap vision draws upon the expertise and perspective of multiple international specialists that together provide an overview of past developments and the likely challenges facing the field of THz science and technology in future decades. The document is written in a form that is accessible to policy makers who wish to gain an overview of the current state of the THz art, and for the non-specialist and curious who wish to understand available technology and challenges. A such, our experts deliver a 'snapshot' introduction to the current status of the field and provide suggestions for exciting future technical development directions. Ultimately, we intend the Roadmap to portray the advantages and benefits of the THz domain and to stimulate further exploration of the field in support of scientific research and commercial realisation

NASA Tech Briefs Index, 1977, volume 2, numbers 1-4

Announcements of new technology derived from the research and development activities of NASA are presented. Abstracts, and indexes for subject, personal author, originating center, and Tech Brief number are presented for 1977

Effect of Electric Current on Ceramic Processing

PhDThis work was on the effect of electric current on the processing of ceramics. The focus was on electromigration/electrochemistry and plasma effects. While there is no solid evidence that there is plasma in Spark Plasma Sintering, (SPS), newer techniques e.g. flash, use different conditions so there is an interest in understanding the conditions under which a plasma forms. The minimum arcing voltage was found from literature to be from 10-15V for materials of interest. This is above that found in SPS (10V). However, due to the many contact points in a powder compact much higher voltages (50V) were required in practical experiments. Optical spectroscopy was used to verify the formation of a plasma, and emission peaks from the powder compact material were visible implying they were vaporised and formed the plasma. Electromigration was exploited to alter the oxidation of zirconium diboride, by passing current through the oxide layer (120μm zirconia base grown at 1200°C) oxygen could be pumped either away or toward the diboride bulk. Small cubes (3mm) of diboride had platinum foil electrodes applied on both sides and oxidation was performed at 1400°C for 5hr. Without a field the oxide grew to 360μm, by applying 10V and 100mA the oxide grew to 150μm under the +ve electrode but 1400μm under the -ve electrode. Electrochemical reduction was believed to have occurred due to the electrical properties of the material changing during oxidation and visible blackening of the oxide. Combining the techniques from both earlier works, a contactless flash sintering setup was developed. This used two plasma arcs as electrodes to heat and pass current through the sample. Various materials, currents and times were used, but the best result was with SiC:B4C which was sintered in 3s with 6A, the microstructure showed sharp grains, no segregation and limited grain growth ( initially 0.7μm SiC and 0.5μm B4C, this grew to 1.1μm and 1.4μm). This was the first recorded case of contactless flash sintering and the technique has the potential to sinter ceramics in a continuous manner.The European framework 7 ADMACOM (Advanced manufacturing routes for metal/Composite components for aerospace) (EC FP7 2007-2013) EPSRC Materials for Extreme Environments (EP/K008749/1, XMat)

The 2019 surface acoustic waves roadmap

Today, surface acoustic waves (SAWs) and bulk acoustic waves are already two of the very few phononic technologies of industrial relevance and can been found in a myriad of devices employing these nanoscale earthquakes on a chip. Acoustic radio frequency filters, for instance, are integral parts of wireless devices. SAWs in particular find applications in life sciences and microfluidics for sensing and mixing of tiny amounts of liquids. In addition to this continuously growing number of applications, SAWs are ideally suited to probe and control elementary excitations in condensed matter at the limit of single quantum excitations. Even collective excitations, classical or quantum are nowadays coherently interfaced by SAWs. This wide, highly diverse, interdisciplinary and continuously expanding spectrum literally unites advanced sensing and manipulation applications. Remarkably, SAW technology is inherently multiscale and spans from single atomic or nanoscopic units up even to the millimeter scale. The aim of this Roadmap is to present a snapshot of the present state of surface acoustic wave science and technology in 2019 and provide an opinion on the challenges and opportunities that the future holds from a group of renown experts, covering the interdisciplinary key areas, ranging from fundamental quantum effects to practical applications of acoustic devices in life science

Development and Applications of Terahertz Near-Field Microscopes for Surface Plasmon Imaging

The confined nature of surface plasmons (SPs) often imposes challenges on their experimental detection and makes specific near-field probes necessary. While various SP detection methods have been developed in the optical domain, only a few examples of SP imaging have been reported in the terahertz range. In this thesis, specific problems of current terahertz near-field detection systems have been addressed which has led to the development of two new SP imaging methods. In the first method, SP imaging is demonstrated using the integrated subwavelength aperture near-field probe. The photoconductive antenna inside the probe is sensitive to the SP electric-field despite the orthogonal spatial orientation between the antenna and the SP polarisation. This enables SP imaging directly on a metallic surface employing a photoconductive antenna. This unexpected sensitivity has been applied to SP imaging in two examples: first, the SP propagation has been imaged on a resonant THz bow-tie antenna and second, the SP excitation by a strongly focused terahertz beam directly on the metallic probe surface has been investigated. The second method presents an electro-optic micro-resonator for SP imaging. A micro-resonator structure has the potential to provide a better sensitivity and spatial resolution, as well as a lower level of invasiveness compared to bulk crystals, which are commonly used in terahertz near-field systems. The micro-resonator design is explained in detail and the impact of the micro-resonator geometry on the probe performance is discussed. This micro-resonator has then been fabricated and embedded into an electro-optic detection system. This detection system has been fully characterised with the focus on two functional units which are essential for its performance: a tapered parallel plate waveguide for broadband terahertz transmission and the balanced detector for noise reduction. The overall performance of the detection system has been evaluated for its use as a terahertz near-field microscope

The 2023 terahertz science and technology roadmap

Terahertz (THz) radiation encompasses a wide spectral range within the electromagnetic spectrum that extends from microwaves to the far infrared (100 GHz–∼30 THz). Within its frequency boundaries exist a broad variety of scientific disciplines that have presented, and continue to present, technical challenges to researchers. During the past 50 years, for instance, the demands of the scientific community have substantially evolved and with a need for advanced instrumentation to support radio astronomy, Earth observation, weather forecasting, security imaging, telecommunications, non-destructive device testing and much more. Furthermore, applications have required an emergence of technology from the laboratory environment to production-scale supply and in-the-field deployments ranging from harsh ground-based locations to deep space. In addressing these requirements, the research and development community has advanced related technology and bridged the transition between electronics and photonics that high frequency operation demands. The multidisciplinary nature of THz work was our stimulus for creating the 2017 THz Science and Technology Roadmap (Dhillon et al 2017 J. Phys. D: Appl. Phys. 50 043001). As one might envisage, though, there remains much to explore both scientifically and technically and the field has continued to develop and expand rapidly. It is timely, therefore, to revise our previous roadmap and in this 2023 version we both provide an update on key developments in established technical areas that have important scientific and public benefit, and highlight new and emerging areas that show particular promise. The developments that we describe thus span from fundamental scientific research, such as THz astronomy and the emergent area of THz quantum optics, to highly applied and commercially and societally impactful subjects that include 6G THz communications, medical imaging, and climate monitoring and prediction. Our Roadmap vision draws upon the expertise and perspective of multiple international specialists that together provide an overview of past developments and the likely challenges facing the field of THz science and technology in future decades. The document is written in a form that is accessible to policy makers who wish to gain an overview of the current state of the THz art, and for the non-specialist and curious who wish to understand available technology and challenges. A such, our experts deliver a 'snapshot' introduction to the current status of the field and provide suggestions for exciting future technical development directions. Ultimately, we intend the Roadmap to portray the advantages and benefits of the THz domain and to stimulate further exploration of the field in support of scientific research and commercial realisation

Small business innovation research: Program solicitation

This, the seventh annual SBIR solicitation by NASA, describes the program, identifies eligibility requirements, outlines the required proposal format and content, states proposal preparation and submission requirements, describes the proposal evaluation and award selection process, and provides other information to assist those interested in participating in NASA's SBIR program. It also identifies the Technical Topics and Subtopics in which SBIR Phase 1 proposals are solicited in 1989. These Topics and Subtopics cover a broad range of current NASA interests, but do not necessarily include all areas in which NASA plans or currently conducts research. High-risk high pay-off innovations are desired

Modern Applications in Optics and Photonics: From Sensing and Analytics to Communication

Optics and photonics are among the key technologies of the 21st century, and offer potential for novel applications in areas such as sensing and spectroscopy, analytics, monitoring, biomedical imaging/diagnostics, and optical communication technology. The high degree of control over light fields, together with the capabilities of modern processing and integration technology, enables new optical measurement systems with enhanced functionality and sensitivity. They are attractive for a range of applications that were previously inaccessible. This Special Issue aims to provide an overview of some of the most advanced application areas in optics and photonics and indicate the broad potential for the future