A two phase framework for visible light-based positioning in an indoor environment: performance, latency, and illumination

Recently with the advancement of solid state lighting and the application thereof to Visible Light Communications (VLC), the concept of Visible Light Positioning (VLP) has been targeted as a very attractive indoor positioning system (IPS) due to its ubiquity, directionality, spatial reuse, and relatively high modulation bandwidth. IPSs, in general, have 4 major components (1) a modulation, (2) a multiple access scheme, (3) a channel measurement, and (4) a positioning algorithm. A number of VLP approaches have been proposed in the literature and primarily focus on a fixed combination of these elements and moreover evaluate the quality of the contribution often by accuracy or precision alone. In this dissertation, we provide a novel two-phase indoor positioning algorithmic framework that is able to increase robustness when subject to insufficient anchor luminaries and also incorporate any combination of the four major IPS components. The first phase provides robust and timely albeit less accurate positioning proximity estimates without requiring more than a single luminary anchor using time division access to On Off Keying (OOK) modulated signals while the second phase provides a more accurate, conventional, positioning estimate approach using a novel geometric constrained triangulation algorithm based on angle of arrival (AoA) measurements. However, this approach is still an application of a specific combination of IPS components. To achieve a broader impact, the framework is employed on a collection of IPS component combinations ranging from (1) pulsed modulations to multicarrier modulations, (2) time, frequency, and code division multiple access, (3) received signal strength (RSS), time of flight (ToF), and AoA, as well as (4) trilateration and triangulation positioning algorithms. Results illustrate full room positioning coverage ranging with median accuracies ranging from 3.09 cm to 12.07 cm at 50% duty cycle illumination levels. The framework further allows for duty cycle variation to include dimming modulations and results range from 3.62 cm to 13.15 cm at 20% duty cycle while 2.06 cm to 8.44 cm at a 78% duty cycle. Testbed results reinforce this frameworks applicability. Lastly, a novel latency constrained optimization algorithm can be overlaid on the two phase framework to decide when to simply use the coarse estimate or when to expend more computational resources on a potentially more accurate fine estimate. The creation of the two phase framework enables robust, illumination, latency sensitive positioning with the ability to be applied within a vast array of system deployment constraints

The Future of the Operating Room: Surgical Preplanning and Navigation using High Accuracy Ultra-Wideband Positioning and Advanced Bone Measurement

This dissertation embodies the diversity and creativity of my research, of which much has been peer-reviewed, published in archival quality journals, and presented nationally and internationally. Portions of the work described herein have been published in the fields of image processing, forensic anthropology, physical anthropology, biomedical engineering, clinical orthopedics, and microwave engineering. The problem studied is primarily that of developing the tools and technologies for a next-generation surgical navigation system. The discussion focuses on the underlying technologies of a novel microwave positioning subsystem and a bone analysis subsystem. The methodologies behind each of these technologies are presented in the context of the overall system with the salient results helping to elucidate the difficult facets of the problem. The microwave positioning system is currently the highest accuracy wireless ultra-wideband positioning system that can be found in the literature. The challenges in producing a system with these capabilities are many, and the research and development in solving these problems should further the art of high accuracy pulse-based positioning

An efficient constrained weighted least squares method with bias reduction for TDOA-based localization

This paper addresses the source location problem by using time-difference-of-arrival (TDOA) measurements. The two-stage weighted least squares (TWLS) algorithm has been widely used in the TDOA location. However, the estimation accuracy of the source location is poor and the bias is significant when the measurement noise is large. Owing to the nonlinear nature of the system model, we reformulate the localization problem as a constrained weighted least squares problem and derive the theoretical bias of the source location estimate from the maximum-likelihood (ML) estimation. To reduce the location bias and improve location accuracy, a novel bias-reduced method is developed based on an iterative constrained weighted least squares algorithm. The new method imposes a set of linear equality constraints instead of the quadratic constraints to suppress the bias. Numerical simulations demonstrate the significant performance improvement of the proposed method over the traditional methods. The bias is reduced significantly and the Cramér–Rao lower bound accuracy can also be achieve

Time-based Location Techniques Using Inexpensive, Unsynchronized Clocks in Wireless Networks

The ability to measure location using time of flight in IEEE 802.11 networks is impeded by the standard clock resolution, imprecise synchronization of the 802.11 protocol, and the inaccuracy of available clocks. To achieve real-time location with accuracy goals of a few meters, we derive new consensus synchronization techniques for free-running clocks. Using consensus synchronization, we improve existing time of arrival (TOA) techniques and introduce new time difference of arrival (TDOA) techniques. With this common basis, we show how TOA is theoretically superior to TDOA. Using TOA measurements, we can locate wireless nodes that participate in the location system, and using TDOA measurements, we can locate nodes that do not participate. We demonstrate applications using off-the-shelf 802.11 hardware that can determine location to within 3m using simple, existing optimization methods. The synchronization techniques extend existing ones providing distributed synchronization for free-running clocks to cases where send times cannot be controlled and adjusted precisely, as in 802.11 networks. These location and synchronization techniques may be applied to transmitting wireless nodes using any communication protocol where cooperating nodes can produce send and receive timestamps

Towards secure & robust PNT for automated systems

This dissertation makes four contributions in support of secure and robust position, navigation, and timing (PNT) for automated systems. The first two relate to PNT security while the latter two address robust positioning for automated ground vehicles. The first contribution is a fundamental theory for provably-secure clock synchronization between two agents in a distributed automated system. All one-way synchronization protocols, such as those based on the Global Positioning System (GPS) and other Global Navigation Satellite Systems (GNSS), are shown to be vulnerable to man-in-the-middle delay attacks. This contribution is the first to identify the necessary and sufficient conditions for provably secure clock synchronization. The second contribution, also related to PNT security, is a three-year study of the world-wide GPS interference landscape based on data from a dual-frequency GNSS receiver operating continuously on the International Space Station (ISS). This work is the first publicly-reported space-based survey of GNSS interference, and unveils previously-unreported GNSS interference activity. The third contribution is a novel ground vehicle positioning technique that is robust to GNSS signal blockage, poor lighting conditions, and adverse weather events such as heavy rain and dense fog. The technique relies on sensors that are commonly available on automated vehicles and are insensitive to lighting and inclement weather: automotive radar, low-cost inertial measurement units (IMUs), and GNSS. Remarkably, it is shown that, given a prior radar map, the proposed technique operating on data from off-the-shelf all-weather automotive sensors can maintain sub-50-cm horizontal position accuracy during 60 min of GNSS-denied driving in downtown Austin, TX. This dissertation’s final contribution is an analysis and demonstration of the feasibility of crowd-sourced digital mapping for automated vehicles. Localization techniques, such as the one described in the previous contribution, rely on such digital maps for accuracy and robustness. A key enabler for large-scale up-to-date maps is enlisting the help of the very consumer vehicles that need the map to build and update it. A method for fusing multi-session vision data into a unified digital map is developed. The asymptotic limit of such a map’s globally-referenced position accuracy is explored for the case in which the mapping agents rely on low-cost GNSS receivers performing standard code-phase-based navigation. Experimental validation along a semi-urban route shows that low-cost consumer vehicles incrementally tighten the accuracy of the jointly-optimized digital map over time enough to support sub-lane-level positioning in a global frame of reference.Electrical and Computer Engineerin

New Approach of Indoor and Outdoor Localization Systems

Accurate determination of the mobile position constitutes the basis of many new applications. This book provides a detailed account of wireless systems for positioning, signal processing, radio localization techniques (Time Difference Of Arrival), performances evaluation, and localization applications. The first section is dedicated to Satellite systems for positioning like GPS, GNSS. The second section addresses the localization applications using the wireless sensor networks. Some techniques are introduced for localization systems, especially for indoor positioning, such as Ultra Wide Band (UWB), WIFI. The last section is dedicated to Coupled GPS and other sensors. Some results of simulations, implementation and tests are given to help readers grasp the presented techniques. This is an ideal book for students, PhD students, academics and engineers in the field of Communication, localization & Signal Processing, especially in indoor and outdoor localization domains