The Problem of Mutual Exclusion: A New Distributed Solution

In both centralized and distributed systems, processes cooperate and compete with each other to access the system resources. Some of these resources must be used exclusively. It is then required that only one process access the shared resource at a given time. This is referred to as the problem of mutual exclusion. Several synchronization mechanisms have been proposed to solve this problem. In this thesis, an effort has been made to compile most of the existing mutual exclusion solutions for both shared memory and message-passing based systems. A new distributed algorithm, which uses a dynamic information structure, is presented to solve the problem of mutual exclusion. It is proved to be free from both deadlock and starvation. This solution is shown to be economical in terms of the number of message exchanges required per critical section execution. Procedures for recovery from both site and link failures are also given

A message-passing system for the large-grain data-flow machine

The Large-Grain Data-Flow (LGDF) Machine is a tightly-coupled multi-processor consisting of several independent nodes, upon each of which may run one or more tasks. These tasks must be able to communicate and synchronize with each other. This document describes a message-passing system developed to meet these requirements. The message-passing system allows any task on an arbitrary node to send information to any other task on an arbitrary, possibly the same, node. The system is based on the use of shared memory. Messages may be of any length, subject only to the constraints of memory size. Except for a header of control information, the system places no interpretation upon the contents of the message. Using performance data automatically provided, the user can easily tune the system to enhance performance. The first section of this paper presents a brief introduction to the concept of large-grain data-now. This is followed by a description of the message-passing system. All components of the system from the hardware to the high level system calls are discussed. The third section is a user's manual. This is a guide to the low level system calls, to system tunable parameters, and to deadlock conditions. The paper is concluded with a discussion of possible problems with and extensions to the system

Using simulation techniques to prove timing properties

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1995.Includes bibliographical references (p. 151-160).by Victor Luchangco.M.S

Efficiency Improvements in the Quality Assurance Process for Data Races

As the usage of concurrency in software has gained importance in the last years, and is still rising, new types of defects increasingly appeared in software. One of the most prominent and critical types of such new defect types are data races. Although research resulted in an increased effectiveness of dynamic quality assurance regarding data races, the efficiency in the quality assurance process still is a factor preventing widespread practical application. First, dynamic quality assurance techniques used for the detection of data races are inefficient. Too much effort is needed for conducting dynamic quality assurance. Second, dynamic quality assurance techniques used for the analysis of reported data races are inefficient. Too much effort is needed for analyzing reported data races and identifying issues in the source code. The goal of this thesis is to enable efficiency improvements in the process of quality assurance for data races by: (1) analyzing the representation of the dynamic behavior of a system under test. The results are used to focus instrumentation of this system, resulting in a lower runtime overhead during test execution compared to a full instrumentation of this system. (2) Analyzing characteristics and preprocessing of reported data races. The results of the preprocessing are then provided to developers and quality assurance personnel, enabling an analysis and debugging process, which is more efficient than traditional analysis of data race reports. Besides dynamic data race detection, which is complemented by the solution, all steps in the process of dynamic quality assurance for data races are discussed in this thesis. The solution for analyzing UML Activities for nodes possibly executing in parallel to other nodes or themselves is based on a formal foundation using graph theory. A major problem that has been solved in this thesis was the handling of cycles within UML Activities. This thesis provides a dynamic limit for the number of cycle traversals, based on the elements of each UML Activity to be analyzed and their semantics. Formal proofs are provided with regard to the creation of directed acyclic graphs and with regard to their analysis concerning the identification of elements that may be executed in parallel to other elements. Based on an examination of the characteristics of data races and data race reports, the results of dynamic data race detection are preprocessed and the outcome of this preprocessing is presented to users for further analysis. This thesis further provides an exemplary application of the solution idea, of the results of analyzing UML Activities, and an exemplary examination of the efficiency improvement of the dynamic data race detection, which showed a reduction in the runtime overhead of 44% when using the focused instrumentation compared to full instrumentation. Finally, a controlled experiment has been set up and conducted to examine the effects of the preprocessing of reported data races on the efficiency of analyzing data race reports. The results show that the solution presented in this thesis enables efficiency improvements in the analysis of data race reports between 190% and 660% compared to using traditional approaches. Finally, opportunities for future work are shown, which may enable a broader usage of the results of this thesis and further improvements in the efficiency of quality assurance for data races.Da die Verwendung von Concurrency in Software in den letzten Jahren an Bedeutung gewonnen hat, und immer noch gewinnt, sind zunehmend neue Arten von Fehlern in Software aufgetaucht. Eine der prominentesten und kritischsten Arten solcher neuer Fehlertypen sind data races. Auch wenn die Forschung zu einer steigenden Effektivität von Verfahren der dynamischen Qualitätssicherung geführt hat, so ist die Effizienz im Prozess der Qualitätssicherung noch immer ein Faktor, der eine weitverbreitete praktische Anwendung verhindert. Zum einen wird zu viel Aufwand benötigt, um dynamische Qualitätssicherung durchzuführen. Zum anderen sind die Verfahren zur Analyse gemeldeter data races ineffizient; es wird zu viel Aufwand benötigt, um gemeldete data races zu analysieren und Probleme im Quellcode zu identifizieren. Das Ziel dieser Dissertation ist es, Effizienzsteigerungen im Qualitätssicherungsprozess für data races zu ermöglichen, durch: (1) Analyse der Repräsentation des dynamischen Verhaltens des zu testenden Systems. Mit den Ergebnissen wird die Instrumentierung dieses Systems fokussiert, so dass ein im Vergleich zur vollen Instrumentierung des Systems geringerer Mehraufwand an Laufzeit benötigt wird. (2) Analyse der Charakteristiken von und Vorverarbeitung der gemeldeten data races. Die Ergebnisse der Vorverarbeitung werden Mitarbeitenden in der Entwicklung und Qualitätssicherung präsentiert, so dass ein Analyse- und Fehlerbehebungsprozess ermöglicht wird, welcher effizienter als traditionelle Analysen gemeldeter data races ist. Mit Ausnahme der dynamischen data race Erkennung, welche durch die Lösung komplementiert wird, werden alle Schritte im Prozess der dynamischen Qualitätssicherung für data races in dieser Dissertation behandelt. Die Lösung zur Analyse von UML Aktivitäten auf Knoten, die möglicherweise parallel zu sich selbst oder anderen Knoten ausgeführt werden, basiert auf einer formalen Grundlage aus dem Bereich der Graphentheorie. Eines der Hauptprobleme, welches gelöst wurde, war die Verarbeitung von Zyklen innerhalb der UML Aktivitäten. Diese Dissertation führt ein dynamisches Limit für die Anzahl an Zyklusdurchläufen ein, welches die Elemente jeder zu analysierenden UML Aktivität sowie deren Semantiken berücksichtigt. Ebenso werden formale Beweise präsentiert in Bezug auf die Erstellung gerichteter azyklischer Graphen, sowie deren Analyse zur Identifizierung von Elementen, die parallel zu anderen Elementen ausgeführt werden können. Auf Basis einer Untersuchung von Charakteristiken von data races sowie Meldungen von data races werden die Ergebnisse der dynamischen Erkennung von data races vorverarbeitet, und das Ergebnis der Vorverarbeitung gemeldeter data races wird Benutzern zur weiteren Analyse präsentiert. Diese Dissertation umfasst weiterhin eine exemplarische Anwendung der Lösungsidee und der Analyse von UML Aktivitäten, sowie eine exemplarische Untersuchung der Effizienzsteigerung der dynamischen Erkennung von data races. Letztere zeigte eine Reduktion des Mehraufwands an Laufzeit von 44% bei fokussierter Instrumentierung im Vergleich zu voller Instrumentierung auf. Abschließend wurde ein kontrolliertes Experiment aufgesetzt und durchgeführt, um die Effekte der Vorverarbeitung gemeldeter data races auf die Effizienz der Analyse dieser gemeldeten data races zu untersuchen. Die Ergebnisse zeigen, dass die in dieser Dissertation vorgestellte Lösung verglichen mit traditionellen Ansätzen Effizienzsteigerungen in der Analyse gemeldeter data races von 190% bis zu 660% ermöglicht. Abschließend werden Möglichkeiten für zukünftige Arbeiten vorgestellt, welche eine breitere Anwendung der Ergebnisse dieser Dissertation ebenso wie weitere Effizienzsteigerungen im Qualitätssicherungsprozess für data races ermöglichen können

Systems support for distributed learning environments

This thesis contends that the growing phenomena of multi-user networked "learning environments" should be treated as distributed interactive systems and that their developers should be aware of the systems and networks issues involved in their construction and maintenance. Such environments are henceforth referred to as distributed learning environments, or DLEs. Three major themes are identified as part of systems support: i) shared resource coherence in DLEs; ii) Quality of Service for the end- users of DLEs; and iii) the need for an integrating framework to develop, deploy and manage DLEs. The thesis reports on several distinct implementations and investigations that are each linked by one or more of those themes. Initially, responsiveness and coherence emerged as potentially conflicting requirements, and although a system was built that successfully resolved this conflict it proved difficult to move from the "clean room" conditions of a research project into a real world learning context. Accordingly, subsequent systems adopted a web-based approach to aid deployment in realistic settings. Indeed, production versions of these systems have been used extensively in credit-bearing modules in several Scottish Universities. Interactive responsiveness then emerged as a major Quality of Service issue in its own right, and motivated a series of investigations into the sources of delay, as experienced by end users of web-oriented distributed learning environments. Investigations into this issue provided insight into the nature of web-oriented interactive distributed learning and highlighted the need to be QoS-aware. As the volume and the range of usage of distributed learning applications increased the need for an integrating framework emerged. This required identifying and supporting a wide variety of educational resource types and also the key roles occupied by users of the system, such as tutors, students, supervisors, service providers, administrators, examiners. The thesis reports on the approaches taken and lessons learned from researching, designing and implementing systems which support distributed learning. As such, it constitutes a documented body of work that can inform the future design and deployment of distributed learning environments

A formal framework for specification-based embedded real-time system engineering

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2008.Includes bibliographical references (v. 2, p. 517-545).The increasing size and complexity of modern software-intensive systems present novel challenges when engineering high-integrity artifacts within aggressive budgetary constraints. Among these challenges, ensuring confidence in the engineered system, through validation and verification activities, represents the high cost item on many projects. The expensive nature of engineering high-integrity systems using traditional approaches can be partly attributed to the lack of analysis facilities during the early phases of the lifecycle, causing the validation and verification activities to begin too late in the engineering lifecycle. Other challenges include the management of complexity, opportunities for reuse without compromising confidence, and the ability to trace system features across lifecycle phases. The use of models as a specification mechanism provides an approach to mitigate complexity through abstraction. Furthermore, if the specification approach has formal underpinnings, the use of models can be leveraged to automate engineering activities such as formal analysis and test case generation. The research presented in this thesis proposes an engineering framework which addresses the high cost of validation and verification activities through specification-based system engineering. More specifically, the framework provides an integrated approach to embedded real-time system engineering which incorporates specification, simulation, formal verification, and test-case generation. The framework aggregates the state-of-the-art in individual software engineering disciplines to provide an end-to-end approach to embedded real-time system engineering. The key aspects of the framework include: * A novel specification language, the Timed Abstract State Machine (TASM) language, which extends the theory of Abstract State Machines (ASM).(cont.) The TASM language is a literate formal specification language which can be applied and multiple levels of abstraction and which can express the three key aspects of embedded real-time systems - function, time, and resources. * Automated verification capabilities achieved through the integration of mature analysis engines, namely the UPPAAL tool suite and the SAT4J SAT solver. The verification capabilities provided by the framework include completeness and consistency verification, model checking, execution time analysis, and resource consumption analysis. * Bi-directional traceability of model features across levels of abstraction and lifecycle phases. Traceability is achieved syntactically through archetypical refinement types; each refinement type provides correctness criteria, which, if met, guarantee semantic integrity through the refinement. * Automated test case generation capabilities for unit testing, integration testing, and regression testing. Unit test cases are generated to achieve TASM specification coverage through the rule coverage criterion. Integration test case generation is achieved through the hierarchical composition of unit test cases. Regression test case generation is achieved by leveraging the bi-directional traceability of model features. The framework is implemented into an integrated tool suite, the TASM toolset, which incorporates the UPPAAL tool suite and the SAT4J SAT solver. The toolset and framework are evaluated through experimentation on three industrial case studies - an automated manufacturing system, a "drive-by-wire" system used at a major automotive manufacturer, and a scripting environment used on the International Space Station.by Martin Ouimet.Ph.D