A Novel Ultra Low-Power 10T CNFET-Based Full Adder Cell Design in 32nm Technology

Nowadays, energy consumption is the main concern in portable electronic systems such as laptops, smart mobile phones, personal digital assistances (PDAs) and so forth. Considering that the 1-bit Full adder cell has been the determinant circuit due to its wide usage in these systems, it affects the entire performance of the electronic system. In this paper, a novel low-power and low-energy 10 transistor (10T) Full Adder cell using NAND/NOR functions based on carbon nanotube field effect transistors (CNFETs) is presented. The proposed cell showed superiority in terms of power-delay product (PDP) compared to the other cells under different simulation condition, such as power supply, temperature, load and operating frequency variations. Moreover, a Monte Carlo (MC) simulation was conducted to study the reliability of the proposed cell against manufacturing process variations (i.e. the variations of diameters of carbon nanotubes). Simulations confirmed the robustness of the proposed cell

Energy Efficient Policies, Scheduling, and Design for Sustainable Manufacturing Systems

Climate mitigation, more stringent regulations, rising energy costs, and sustainable manufacturing are pushing researchers to focus on energy efficiency, energy flexibility, and implementation of renewable energy sources in manufacturing systems. This thesis aims to analyze the main works proposed regarding these hot topics, and to fill the gaps in the literature. First, a detailed literature review is proposed. Works regarding energy efficiency in different manufacturing levels, in the assembly line, energy saving policies, and the implementation of renewable energy sources are analyzed. Then, trying to fill the gaps in the literature, different topics are analyzed more in depth. In the single machine context, a mathematical model aiming to align the manufacturing power required to a renewable energy supply in order to obtain the maximum profit is developed. The model is applied to a single work center powered by the electric grid and by a photovoltaic system; afterwards, energy storage is also added to the power system. Analyzing the job shop context, switch off policies implementing workload approach and scheduling considering variable speed of the machines and power constraints are proposed. The direct and indirect workloads of the machines are considered to support the switch on/off decisions. A simulation model is developed to test the proposed policies compared to others presented in the literature. Regarding the job shop scheduling, a fixed and variable power constraints are considered, assuming the minimization of the makespan as the objective function. Studying the factory level, a mathematical model to design a flow line considering the possibility of using switch-off policies is developed. The design model for production lines includes a targeted imbalance among the workstations to allow for defined idle time. Finally, the main findings, results, and the future directions and challenges are presented

A Modeling and Analysis Framework To Support Monitoring, Assessment, and Control of Manufacturing Systems Using Hybrid Models

The manufacturing industry has constantly been challenged to improve productivity, adapt to continuous changes in demand, and reduce cost. The need for a competitive advantage has motivated research for new modeling and control strategies able to support reconfiguration considering the coupling between different aspects of plant floor operations. However, models of manufacturing systems usually capture the process flow and machine capabilities while neglecting the machine dynamics. The disjoint analysis of system-level interactions and machine-level dynamics limits the effectiveness of performance assessment and control strategies. This dissertation addresses the enhancement of productivity and adaptability of manufacturing systems by monitoring and controlling both the behavior of independent machines and their interactions. A novel control framework is introduced to support performance monitoring and decision making using real-time simulation, anomaly detection, and multi-objective optimization. The intellectual merit of this dissertation lies in (1) the development a mathematical framework to create hybrid models of both machines and systems capable of running in real-time, (2) the algorithms to improve anomaly detection and diagnosis using context-sensitive adaptive threshold limits combined with context-specific classification models, and (3) the construction of a simulation-based optimization strategy to support decision making considering the inherent trade-offs between productivity, quality, reliability, and energy usage. The result is a framework that transforms the state-of-the-art of manufacturing by enabling real-time performance monitoring, assessment, and control of plant floor operations. The control strategy aims to improve the productivity and sustainability of manufacturing systems using multi-objective optimization. The outcomes of this dissertation were implemented in an experimental testbed. Results demonstrate the potential to support maintenance actions, productivity analysis, and decision making in manufacturing systems. Furthermore, the proposed framework lays the foundation for a seamless integration of real systems and virtual models. The broader impact of this dissertation is the advancement of manufacturing science that is crucial to support economic growth. The implementation of the framework proposed in this dissertation can result in higher productivity, lower downtime, and energy savings. Although the project focuses on discrete manufacturing with a flow shop configuration, the control framework, modeling strategy, and optimization approach can be translated to job shop configurations or batch processes. Moreover, the algorithms and infrastructure implemented in the testbed at the University of Michigan can be integrated into automation and control products for wide availability.PHDMechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147657/1/migsae_1.pd

Energy efficiency in discrete-manufacturing systems: insights, trends, and control strategies

Since the depletion of fossil energy sources, rising energy prices, and governmental regulation restrictions, the current manufacturing industry is shifting towards more efficient and sustainable systems. This transformation has promoted the identification of energy saving opportunities and the development of new technologies and strategies oriented to improve the energy efficiency of such systems. This paper outlines and discusses most of the research reported during the last decade regarding energy efficiency in manufacturing systems, the current technologies and strategies to improve that efficiency, identifying and remarking those related to the design of management/control strategies. Based on this fact, this paper aims to provide a review of strategies for reducing energy consumption and optimizing the use of resources within a plant into the context of discrete manufacturing. The review performed concerning the current context of manufacturing systems, control systems implemented, and their transformation towards Industry 4.0 might be useful in both the academic and industrial dimension to identify trends and critical points and suggest further research lines.Peer ReviewedPreprin

Thermophysical Phenomena in Metal Additive Manufacturing by Selective Laser Melting: Fundamentals, Modeling, Simulation and Experimentation

Among the many additive manufacturing (AM) processes for metallic materials, selective laser melting (SLM) is arguably the most versatile in terms of its potential to realize complex geometries along with tailored microstructure. However, the complexity of the SLM process, and the need for predictive relation of powder and process parameters to the part properties, demands further development of computational and experimental methods. This review addresses the fundamental physical phenomena of SLM, with a special emphasis on the associated thermal behavior. Simulation and experimental methods are discussed according to three primary categories. First, macroscopic approaches aim to answer questions at the component level and consider for example the determination of residual stresses or dimensional distortion effects prevalent in SLM. Second, mesoscopic approaches focus on the detection of defects such as excessive surface roughness, residual porosity or inclusions that occur at the mesoscopic length scale of individual powder particles. Third, microscopic approaches investigate the metallurgical microstructure evolution resulting from the high temperature gradients and extreme heating and cooling rates induced by the SLM process. Consideration of physical phenomena on all of these three length scales is mandatory to establish the understanding needed to realize high part quality in many applications, and to fully exploit the potential of SLM and related metal AM processes

Energy-efficient through-life smart design, manufacturing and operation of ships in an industry 4.0 environment

Energy efficiency is an important factor in the marine industry to help reduce manufacturing and operational costs as well as the impact on the environment. In the face of global competition and cost-effectiveness, ship builders and operators today require a major overhaul in the entire ship design, manufacturing and operation process to achieve these goals. This paper highlights smart design, manufacturing and operation as the way forward in an industry 4.0 (i4) era from designing for better energy efficiency to more intelligent ships and smart operation through-life. The paper (i) draws parallels between ship design, manufacturing and operation processes, (ii) identifies key challenges facing such a temporal (lifecycle) as opposed to spatial (mass) products, (iii) proposes a closed-loop ship lifecycle framework and (iv) outlines potential future directions in smart design, manufacturing and operation of ships in an industry 4.0 value chain so as to achieve more energy-efficient vessels. Through computational intelligence and cyber-physical integration, we envision that industry 4.0 can revolutionise ship design, manufacturing and operations in a smart product through-life process in the near future

A modular hybrid simulation framework for complex manufacturing system design

For complex manufacturing systems, the current hybrid Agent-Based Modelling and Discrete Event Simulation (ABM–DES) frameworks are limited to component and system levels of representation and present a degree of static complexity to study optimal resource planning. To address these limitations, a modular hybrid simulation framework for complex manufacturing system design is presented. A manufacturing system with highly regulated and manual handling processes, composed of multiple repeating modules, is considered. In this framework, the concept of modular hybrid ABM–DES technique is introduced to demonstrate a novel simulation method using a dynamic system of parallel multi-agent discrete events. In this context, to create a modular model, the stochastic finite dynamical system is extended to allow the description of discrete event states inside the agent for manufacturing repeating modules (meso level). Moreover, dynamic complexity regarding uncertain processing time and resources is considered. This framework guides the user step-by-step through the system design and modular hybrid model. A real case study in the cell and gene therapy industry is conducted to test the validity of the framework. The simulation results are compared against the data from the studied case; excellent agreement with 1.038% error margin is found in terms of the company performance. The optimal resource planning and the uncertainty of the processing time for manufacturing phases (exo level), in the presence of dynamic complexity is calculated

Simulation of gelled propellant doughs isothermal flow through extrusion dies using finite difference method

During the ram extrusion of gelled propellants, the possible flow instabilities can affect the extruded propellant quality. The numerical modelling helps to enhance the geometry of extrusion die, by minimizing the product distortion caused by material flow during this forming process. In the present work, a numerical model based on the finite difference method is proposed to analyze the flow simulation of double-base gelled propellant doughs through annular channels of extrusion dies. The proposed model implements the pseudo-plastic behavior described by these energetic materials. This model will be used to deduce the configuration of spider legs and annular channels that allow optimize the quality of extruded gelled propellant.The researchers acknowledge to the Spanish Ministry of Economy and Competitiveness and the European Commission their support throughout the ERDF (European Regional Development Fund) by the INNPACTO research project “Smart Propellants” (IPT-2011-0712-020000), involving EXPAL Systems S.A. and Universidad Politecnica de Cartagena (UPCT)

An optimization-based control strategy for energy efficiency of discrete manufacturing systems

In order to reduce the global energy consumption and avoid highest power peaks during operation of manufacturing systems, an optimization-based controller for selective switching on/off of peripheral devices in a test bench that emulates the energy consumption of a periodic system is proposed. First, energy consumption models for the test-bench devices are obtained based on data and subspace identification methods. Next, a control strategy is designed based on both optimization and receding horizon approach, considering the energy consumption models, operating constraints, and the real processes performed by peripheral devices. Thus, a control policy based on dynamical models of peripheral devices is proposed to reduce the energy consumption of the manufacturing systems without sacrificing the productivity. Afterward, the proposed strategy is validated in the test bench and comparing to a typical rule-based control scheme commonly used for these manufacturing systems. Based on the obtained results, reductions near 7% could be achieved allowing improvements in energy efficiency via minimization of the energy costs related to nominal power purchased.Peer ReviewedPostprint (author's final draft

Life cycle assessment (LCA) applied to the process industry: a review

Purpose : Life cycle assessment (LCA) methodology is a well-established analytical method to quantify environmental impacts, which has been mainly applied to products. However, recent literature would suggest that it has also the potential as an analysis and design tool for processes, and stresses that one of the biggest challenges of this decade in the field of process systems engineering (PSE) is the development of tools for environmental considerations. Method : This article attempts to give an overview of the integration of LCA methodology in the context of industrial ecology, and focuses on the use of this methodology for environmental considerations concerning process design and optimization. Results : The review identifies that LCA is often used as a multi-objective optimization of processes: practitioners use LCA to obtain the inventory and inject the results into the optimization model. It also shows that most of the LCA studies undertaken on process analysis consider the unit processes as black boxes and build the inventory analysis on fixed operating conditions. Conclusions : The article highlights the interest to better assimilate PSE tools with LCA methodology, in order to produce a more detailed analysis. This will allow optimizing the influence of process operating conditions on environmental impacts and including detailed environmental results into process industry