5,281 research outputs found
Cross-layer design of multi-hop wireless networks
MULTI -hop wireless networks are usually defined as a collection of nodes
equipped with radio transmitters, which not only have the capability to
communicate each other in a multi-hop fashion, but also to route each others’ data
packets. The distributed nature of such networks makes them suitable for a variety of
applications where there are no assumed reliable central entities, or controllers, and
may significantly improve the scalability issues of conventional single-hop wireless
networks.
This Ph.D. dissertation mainly investigates two aspects of the research issues
related to the efficient multi-hop wireless networks design, namely: (a) network
protocols and (b) network management, both in cross-layer design paradigms to
ensure the notion of service quality, such as quality of service (QoS) in wireless mesh
networks (WMNs) for backhaul applications and quality of information (QoI) in
wireless sensor networks (WSNs) for sensing tasks. Throughout the presentation of
this Ph.D. dissertation, different network settings are used as illustrative examples,
however the proposed algorithms, methodologies, protocols, and models are not
restricted in the considered networks, but rather have wide applicability.
First, this dissertation proposes a cross-layer design framework integrating
a distributed proportional-fair scheduler and a QoS routing algorithm, while using
WMNs as an illustrative example. The proposed approach has significant performance
gain compared with other network protocols. Second, this dissertation proposes
a generic admission control methodology for any packet network, wired and
wireless, by modeling the network as a black box, and using a generic mathematical
0. Abstract 3
function and Taylor expansion to capture the admission impact. Third, this dissertation
further enhances the previous designs by proposing a negotiation process,
to bridge the applications’ service quality demands and the resource management,
while using WSNs as an illustrative example. This approach allows the negotiation
among different service classes and WSN resource allocations to reach the optimal
operational status. Finally, the guarantees of the service quality are extended to
the environment of multiple, disconnected, mobile subnetworks, where the question
of how to maintain communications using dynamically controlled, unmanned data
ferries is investigated
Survey on wireless technology trade-offs for the industrial internet of things
Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment
Rate Optimal design of a Wireless Backhaul Network using TV White Space
The penetration of wireless broadband services in remote areas has primarily
been limited due to the lack of economic incentives that service providers
encounter in sparsely populated areas. Besides, wireless backhaul links like
satellite and microwave are either expensive or require strict line of sight
communication making them unattractive. TV white space channels with their
desirable radio propagation characteristics can provide an excellent
alternative for engineering backhaul networks in areas that lack abundant
infrastructure. Specifically, TV white space channels can provide "free
wireless backhaul pipes" to transport aggregated traffic from broadband sources
to fiber access points. In this paper, we investigate the feasibility of
multi-hop wireless backhaul in the available white space channels by using
noncontiguous Orthogonal Frequency Division Multiple Access (NC-OFDMA)
transmissions between fixed backhaul towers. Specifically, we consider joint
power control, scheduling and routing strategies to maximize the minimum rate
across broadband towers in the network. Depending on the population density and
traffic demands of the location under consideration, we discuss the suitable
choice of cell size for the backhaul network. Using the example of available TV
white space channels in Wichita, Kansas (a small city located in central USA),
we provide illustrative numerical examples for designing such wireless backhaul
network
Unified radio and network control across heterogeneous hardware platforms
Experimentation is an important step in the investigation of techniques for handling spectrum scarcity or the development of new waveforms in future wireless networks. However, it is impractical and not cost effective to construct custom platforms for each future network scenario to be investigated. This problem is addressed by defining Unified Programming Interfaces that allow common access to several platforms for experimentation-based prototyping, research, and development purposes. The design of these interfaces is driven by a diverse set of scenarios that capture the functionality relevant to future network implementations while trying to keep them as generic as possible. Herein, the definition of this set of scenarios is presented as well as the architecture for supporting experimentation-based wireless research over multiple hardware platforms. The proposed architecture for experimentation incorporates both local and global unified interfaces to control any aspect of a wireless system while being completely agnostic to the actual technology incorporated. Control is feasible from the low-level features of individual radios to the entire network stack, including hierarchical control combinations. A testbed to enable the use of the above architecture is utilized that uses a backbone network in order to be able to extract measurements and observe the overall behaviour of the system under test without imposing further communication overhead to the actual experiment. Based on the aforementioned architecture, a system is proposed that is able to support the advancement of intelligent techniques for future networks through experimentation while decoupling promising algorithms and techniques from the capabilities of a specific hardware platform
Smart Grid Communications: Overview of Research Challenges, Solutions, and Standardization Activities
Optimization of energy consumption in future intelligent energy networks (or
Smart Grids) will be based on grid-integrated near-real-time communications
between various grid elements in generation, transmission, distribution and
loads. This paper discusses some of the challenges and opportunities of
communications research in the areas of smart grid and smart metering. In
particular, we focus on some of the key communications challenges for realizing
interoperable and future-proof smart grid/metering networks, smart grid
security and privacy, and how some of the existing networking technologies can
be applied to energy management. Finally, we also discuss the coordinated
standardization efforts in Europe to harmonize communications standards and
protocols.Comment: To be published in IEEE Communications Surveys and Tutorial
Wireless industrial monitoring and control networks: the journey so far and the road ahead
While traditional wired communication technologies have played a crucial role in industrial monitoring and control networks over the past few decades, they are increasingly proving to be inadequate to meet the highly dynamic and stringent demands of today’s industrial applications, primarily due to the very rigid nature of wired infrastructures. Wireless technology, however, through its increased pervasiveness, has the potential to revolutionize the industry, not only by mitigating the problems faced by wired solutions, but also by introducing a completely new class of applications. While present day wireless technologies made some preliminary inroads in the monitoring domain, they still have severe limitations especially when real-time, reliable distributed control operations are concerned. This article provides the reader with an overview of existing wireless technologies commonly used in the monitoring and control industry. It highlights the pros and cons of each technology and assesses the degree to which each technology is able to meet the stringent demands of industrial monitoring and control networks. Additionally, it summarizes mechanisms proposed by academia, especially serving critical applications by addressing the real-time and reliability requirements of industrial process automation. The article also describes certain key research problems from the physical layer communication for sensor networks and the wireless networking perspective that have yet to be addressed to allow the successful use of wireless technologies in industrial monitoring and control networks
WIMAX Basics from PHY Layer to Scheduling and Multicasting Approaches
WiMAX (Worldwide Interoperability for Microwave Access) is an emerging broadband wireless technology for providing Last mile solutions for supporting higher bandwidth and multiple service classes with various quality of service requirement. The unique architecture of the WiMAX MAC and PHY layers that uses OFDMA to allocate multiple channels with different modulation schema and multiple time slots for each channel allows better adaptation of heterogeneous user’s requirements. The main architecture in WiMAX uses PMP (Point to Multipoint), Mesh mode or the new MMR (Mobile Multi hop Mode) deployments where scheduling and multicasting have different approaches. In PMP SS (Subscriber Station) connects directly to BS (Base Station) in a single hop route so channel conditions adaptations and supporting QoS for classes of services is the key points in scheduling, admission control or multicasting, while in Mesh networks SS connects to other SS Stations or to the BS in a multi hop routes, the MMR mode extends the PMP mode in which the SS connects to either a relay station (RS) or to Bs. Both MMR and Mesh uses centralized or distributed scheduling with multicasting schemas based on scheduling trees for routing. In this paper a broad study is conducted About WiMAX technology PMP and Mesh deployments from main physical layers features with differentiation of MAC layer features to scheduling and multicasting approaches in both modes of operations
A Survey on Scheduling in IEEE 802.16 Mesh Mode
Cataloged from PDF version of article.IEEE 802.16 standard (also known as WiMAX)
defines the wireless broadband network technology which aims
to solve the so called last mile problem via providing high
bandwidth Internet even to the rural areas for which the cable
deployment is very costly. The standard mainly focuses on the
MAC and PHY layer issues, supporting two transmission modes:
PMP (Point-to-Multipoint) and mesh modes. Mesh mode is an
optional mode developed as an extension to PMP mode and it
has the advantage of having an improving performance as more
subscribers are added to the system using multi-hop routes. In
802.16 MAC protocol, mesh mode slot allocation and reservation
mechanisms are left open which makes this topic a hot research
area. Hence, the focus of this survey will mostly be on the mesh
mode, and the proposed scheduling algorithms and performance
evaluation methods
- …