Using transfer ratio to evaluate EMC design of adjustable speed drive systems

This paper proposes a way to evaluate the conducted electromagnetic compatibility performance of variable speed drive systems. It is considered that the measured noise level is determined by two factors, the level of the noise source and the conversion efficiency of the propagation path from the source to the measurement equipments. They are corresponding to the two roles played by the converter. On the one hand, a converter provides the noise source and generates the noise current and voltage on the motor side with the cable and the motor. On the other hand, it acts as the propagation path with the DC bus and the rectifier to spread the noise generated on the motor side to the line side. The transfer ratio is defined as the ratio between the CM current on the motor side and the CM current on the line side. It can be used to evaluate the EMC design of a converter because it is independent of the cable and the motor. A simplified model is used to explain this characteristic. It can be measured when the converter is powered off. Verification is carried out by experimental results obtained from a 12-kVA laboratory system.\u

Investigation of the Coupling Paths of a Galvanically Isolated AC/AC Converter

A galvanically isolated three-phase AC/AC converter with a high-frequency AC-link has been analyzed from an EMC point of view. This is a special configuration because of a large number of switches, a high frequency transformer, and a fourwire output. The essential coupling paths are identified.\ud Corresponding suppression remedies are given. The results, before and after measures, have been presented to demonstrate the improvement in EMC.\ud Keywords: AC/AC converter; electromagnetic interference; galvanically isolated\u

Analysis and optimized design of a distributed multi-stage EMC filter for an interleaved three-phase PWM-rectifier system for aircraft applications

Different possible input filter configurations for a modular three-phase PWM rectifier system consisting of three interleaved converter cells are studied. The system is designed for an aircraft application where MIL-STD-461E conducted EMI standards have to be met and system weight is a critical design issue. The importance of a LISN model on the simulated noise levels and the effect of interleaving and power unbalance between the different converter modules is discussed. The effect of the number of filter stages and the degree of distribution of the filter stages among the individual converter modules on the weight and losses of the input filter is studied and optimal filter structures are proposed

New Modulation Technique to Mitigate Common Mode Voltage Effects in Star-Connected Five-Phase AC Drives

Star-connected multiphase AC drives are being considered for electromovility applications such as electromechanical actuators (EMA), where high power density and fault tolerance is demanded. As for three-phase systems, common-mode voltage (CMV) is an issue for multiphase drives. CMV leads to shaft voltages between rotor and stator windings, generating bearing currents which accelerate bearing degradation and produce high electromagnetic interferences (EMI). CMV effects can be mitigated by using appropriate modulation techniques. Thus, this work proposes a new Hybrid PWM algorithm that effectively reduces CMV in five-phase AC electric drives, improving their reliability. All the mathematical background required to understand the proposal, i.e., vector transformations, vector sequences and calculation of analytical expressions for duty cycle determination are detailed. Additionally, practical details that simplify the implementation of the proposal in an FPGA are also included. This technique, HAZSL5M5-PWM, extends the linear range of the AZSL5M5-PWM modulation, providing a full linear range. Simulation results obtained in an accurate multiphase EMA model are provided, showing the validity of the proposed modulation approach.This work has been supported in part by the Government of the Basque Country within the fund for research groups of the Basque University system IT978-16 and in part by the Government of the Basque Country within the research program ELKARTEK as the project ENSOL (KK-2018/00040)

Interleaved multi-cell isolated three-phase PWM rectifier system for aircraft applications

Recently there has been an important increase in electric equipment, as well as, electric power demand in aircrafts applications. This prompts to the necessity of efficient, reliable, and low-weight converters, especially rectifiers from 115VAC to 270VDC because these voltages are used in power distribution. In order to obtain a high efficiency, in aircraft application where the derating in semiconductors is high, normally several semiconductors are used in parallel to decrease the conduction losses. However, this is in conflict with high reliability. To match both goals of high efficiency and reliability, this work proposes an interleaved multi-cell rectifier system, employing several converter cells in parallel instead of parallel-connected semiconductors. In this work a 10kW multi-cell isolated rectifier system has been designed where each cell is composed of a buck type rectifier and a full bridge DC-DC converter. The implemented system exhibits 91% of efficiency, high power density (10kW/10kg), low THD (2.5%), and n−1 fault tolerance which complies, with military aircraft standards

Improving 9-150 kHz EMI Performance of Single-Phase PFC Rectifier

In order to improve the Electromagnetic Interference (EMI) performance of grid-connected power electronics converters within the new 9-150 kHz frequency range, this digest investigates feasible solutions through modifying the EMI filter and applying spectral shaping method. The proposed solutions are validated based on a 1 kW single-phase Power Factor Correction (PFC) rectifier prototype. Moreover, frequency domain modeling approach is utilized as a virtual-oriented methodology in order to analyze the converter behavior and provide fast prototyping.</p