Techniques for improving the performance of frequency-hopped multiple-access communication systems

Imperial Users onl

Iterative Detection of Three-Stage Concatenated FFH-MFSK

Serially concatenated and iteratively decoded Irregular Variable Length Coding (IrVLC) combined with precoded Fast Frequency Hopping (FFH) M-ary Frequency Shift Keying (MFSK) is considered. We employ EXtrinsic Information Transfer (EXIT) charts to investigate the 3-stage concatenation of the FFH-MFSK demodulator, the rate-1 decoder and the outer IrVLC decoder. The proposed joint source and channel coding scheme is capable of operating at low Signal-to-Noise Ratio (SNR) in Rayleigh fading channels contaminated by Partial Band Noise Jamming (PBNJ). The IrVLC scheme is comprised of a number of component Variable Length Coding (VLC) codebooks employing different coding rates for encoding particular fractions of the input source symbol stream. These fractions may be chosen with the aid of EXIT charts in order to shape the inverted EXIT curve of the IrVLC codec so that it can be matched with the EXIT curve of the inner decoder. We demonstrate that using the proposed scheme an infinitesimally low bit error ratio may be achieved at low SNR values

Low-complexity iterative detection techniques for Slow-Frequency-Hop spread-spectrum communications with Reed-Solomon coding.

Slow-frequency-hop (SFH) spread-spectrum communications provide a high level of robustness in packet-radio networks for both military and commercial applications. The use of a Reed-Solomon (R-S) code has proven to be a good choice for use in a SFH system for countering the critical channel impairments of partial-band fading and partial-band interference. In particular, it is effective when reliability information of dwell intervals and individual code symbols can be obtained and errors-and-erasures decoding (EE) can be employed at the receiver. In this dissertation, we consider high-data-rate SFH communications for which the channel in each frequency slot is frequency selective, manifesting itself as intersymbol interference (ISI) at the receiver. The use of a packet-level iterative equalization and decoding technique is considered in conjunction with a SFH system employing R-S coding. In each packet-level iteration, MLSE equalization followed by bounded distance EE decoding is used in each dwell interval. Several per-dwell interleaver designs are considered for the SFH systems and it is shown that packet-level iterations result in a significant improvement in performance with a modest increase in detection complexity for a variety of ISI channels. The use of differential encoding in conjunction with the SFH system and packet-level iterations is also considered, and it is shown to provide further improvements in performance with only a modest additional increase in detection complexity. SFH systems employing packet-level iterations with and without differential encoding are evaluated for channels with partial-band interference. Comparisons are made between the performance of this system and the performance of SFH systems using some other codes and iterative decoding techniques

Improved iterative detection techniques for slow-frequency-hop communications with Reed-Solomon codes

The performance of a packet-level iterative detection technique is examined for a slow-frequency-hop packet radio system using interleaved Reed-Solomon codes and per-dwell differential encoding. A per-dwell soft-input-soft-output detector along with successive-erasures decoding results in a system that performs better than previously considered detection techniques in the presence of partial-band interference. The log-MAP algorithm and two forms of its max-log-MAP approximation are considered for the soft-input-soft-output detector along with different channel estimators. The performance and detection complexity of the systems is compared. A limit on the number of erasures allowed in successive-erasures decoding is also considered, and its effect on the system\u27s performance and detection complexity is examined

A General Framework for Analyzing, Characterizing, and Implementing Spectrally Modulated, Spectrally Encoded Signals

Fourth generation (4G) communications will support many capabilities while providing universal, high speed access. One potential enabler for these capabilities is software defined radio (SDR). When controlled by cognitive radio (CR) principles, the required waveform diversity is achieved via a synergistic union called CR-based SDR. Research is rapidly progressing in SDR hardware and software venues, but current CR-based SDR research lacks the theoretical foundation and analytic framework to permit efficient implementation. This limitation is addressed here by introducing a general framework for analyzing, characterizing, and implementing spectrally modulated, spectrally encoded (SMSE) signals within CR-based SDR architectures. Given orthogonal frequency division multiplexing (OFDM) is a 4G candidate signal, OFDM-based signals are collectively classified as SMSE since modulation and encoding are spectrally applied. The proposed framework provides analytic commonality and unification of SMSE signals. Applicability is first shown for candidate 4G signals, and resultant analytic expressions agree with published results. Implementability is then demonstrated in multiple coexistence scenarios via modeling and simulation to reinforce practical utility

Development of Simulation Components for Wireless Communication

abstract: This thesis work present the simulation of Bluetooth and Wi-Fi radios in real life interference environments. When information is transmitted via communication channels, data may get corrupted due to noise and other channel discrepancies. In order to receive the information safely and correctly, error correction coding schemes are generally employed during the design of communication systems. Usually the simulations of wireless communication systems are done in such a way that they focus on some aspect of communications and neglect the others. The simulators available currently will either do network layer simulations or physical layer level simulations. In many situations, simulations are required which show inter-layer aspects of communication systems. For all such scenarios, a simulation environment, WiscaComm which is based on time-domain samples is built. WiscaComm allows the study of network and physical layer interactions in detail. The advantage of time domain sampling is that it allows the simulation of different radios together which is better than the complex baseband representation of symbols. The environment also supports study of multiple protocols operating simultaneously, which is of increasing importance in today's environment.Dissertation/ThesisMasters Thesis Electrical Engineering 201

Book Review: A Conceptual Review of “Digital Communication Systems”

(Author: Simon Haykin, 2014)Haykin, S. 2014. Digital Communication Systems.John Wiley & Sons, Inc., Hoboken, NJ, USA.Available: <http://www.wiley.com/WileyCDA/WileyTitle/productCd-EHEP001809.html>