Simulations and Algorithms on Reconfigurable Meshes With Pipelined Optical Buses.

Recently, many models using reconfigurable optically pipelined buses have been proposed in the literature. A system with an optically pipelined bus uses optical waveguides, with unidirectional propagation and predictable delays, instead of electrical buses to transfer information among processors. These two properties enable synchronized concurrent access to an optical bus in a pipelined fashion. Combined with the abilities of the bus structure to broadcast and multicast, this architecture suits many communication-intensive applications. We establish the equivalence of three such one-dimensional optical models, namely the LARPBS, LPB, and POB. This implies an automatic translation of algorithms (without loss of speed or efficiency) among these models. In particular, since the LPB is the same as an LARPBS without the ability to segment its buses, their equivalence establishes reconfigurable delays (rather than segmenting ability) as the key to the power of optically pipelined models. We also present simulations for a number of two-dimensional optical models and establish that they possess the same complexity, so that any of these models can simulate a step of one of the other models in constant time with a polynomial increase in size. Specifically, we determine the complexity of three two-dimensional optical models (the PR-Mesh, APPBS, and AROB) to be the same as the well known LR-Mesh and the cycle-free LR-Mesh. We develop algorithms for the LARPBS and PR-Mesh that are more efficient than existing algorithms in part by exploiting the pipelining, segmenting, and multicasting characteristics of these models. We also consider the implications of certain physical constraints placed on the system by restricting the distance over which two processors are able to communicate. All algorithms developed for these models assume that a healthy system is available. We present some fundamental algorithms that are able to tolerate up to N/2 faults on an N-processor LARPBS. We then extend these results to apply to other algorithms in the areas of image processing and matrix operations

Design and Analysis of Optical Interconnection Networks for Parallel Computation.

In this doctoral research, we propose several novel protocols and topologies for the interconnection of massively parallel processors. These new technologies achieve considerable improvements in system performance and structure simplicity. Currently, synchronous protocols are used in optical TDM buses. The major disadvantage of a synchronous protocol is the waste of packet slots. To offset this inherent drawback of synchronous TDM, a pipelined asynchronous TDM optical bus is proposed. The simulation results show that the performance of the proposed bus is significantly better than that of known pipelined synchronous TDM optical buses. Practically, the computation power of the plain TDM protocol is limited. Various extensions must be added to the system. In this research, a new pipelined optical TDM bus for implementing a linear array parallel computer architecture is proposed. The switches on the receiving segment of the bus can be dynamically controlled, which make the system highly reconfigurable. To build large and scalable systems, we need new network architectures that are suitable for optical interconnections. A new kind of reconfigurable bus called segmented bus is introduced to achieve reduced structure simplicity and increased concurrency. We show that parallel architectures based on segmented buses are versatile by showing that it can simulate parallel communication patterns supported by a wide variety of networks with small slowdown factors. New kinds of interconnection networks, the hypernetworks, have been proposed recently. Compared with point-to-point networks, they allow for increased resource-sharing and communication bandwidth utilization, and they are especially suitable for optical interconnects. One way to derive a hypernetwork is by finding the dual of a point-to-point network. Hypercube Q\sb{n}, where n is the dimension, is a very popular point-to-point network. It is interesting to construct hypernetworks from the dual Q\sbsp{n}{*} of hypercube of Q\sb{n}. In this research, the properties of Q\sbsp{n}{*} are investigated and a set of fundamental data communication algorithms for Q\sbsp{n}{*} are presented. The results indicate that the Q\sbsp{n}{*} hypernetwork is a useful and promising interconnection structure for high-performance parallel and distributed computing systems

Scaling Simulations of Reconfigurable Meshes.

This dissertation deals with reconfigurable bus-based models, a new type of parallel machine that uses dynamically alterable connections between processors to allow efficient communication and to perform fast computations. We focus this work on the Reconfigurable Mesh (R-Mesh), one of the most widely studied reconfigurable models. We study the ability of the R-Mesh to adapt an algorithm instance of an arbitrary size to run on a given smaller model size without significant loss of efficiency. A scaling simulation achieves this adaptation, and the simulation overhead expresses the efficiency of the simulation. We construct a scaling simulation for the Fusing-Restricted Reconfigurable Mesh (FR-Mesh), an important restriction of the R-Mesh. The overhead of this simulation depends only on the simulating machine size and not on the simulated machine size. The results of this scaling simulation extend to a variety of concurrent write rules and also translate to an improved scaling simulation of the R-Mesh itself. We present a bus linearization procedure that transforms an arbitrary non-linear bus configuration of an R-Mesh into an equivalent acyclic linear bus configuration implementable on an Linear Reconfigurable Mesh (LR-Mesh), a weaker version of the R-Mesh. This procedure gives the algorithm designer the liberty of using buses of arbitrary shape, while automatically translating the algorithm to run on a simpler platform. We illustrate our bus linearization method through two important applications. The first leads to a faster scaling simulation of the R-Mesh. The second application adapts algorithms designed for R-Meshes to run on models with pipelined optical buses. We also present a simulation of a Directional Reconfigurable Mesh (DR-Mesh) on an LR-Mesh. This simulation has a much better efficiency compared to previous work. In addition to the LR-Mesh, this simulation also runs on models that use pipelined optical buses

Efficient Molecular Dynamics Simulation on Reconfigurable Models with MultiGrid Method

In the field of biology, MD simulations are continuously used to investigate biological studies. A Molecular Dynamics (MD) system is defined by the position and momentum of particles and their interactions. The dynamics of a system can be evaluated by an N-body problem and the simulation is continued until the energy reaches equilibrium. Thus, solving the dynamics numerically and evaluating the interaction is computationally expensive even for a small number of particles in the system. We are focusing on long-ranged interactions, since the calculation time is O(N^2) for an N particle system. In this dissertation, we are proposing two research directions for the MD simulation. First, we design a new variation of Multigrid (MG) algorithm called Multi-level charge assignment (MCA) that requires O(N) time for accurate and efficient calculation of the electrostatic forces. We apply MCA and back interpolation based on the structure of molecules to enhance the accuracy of the simulation. Our second research utilizes reconfigurable models to achieve fast calculation time. We have been working on exploiting two reconfigurable models. We design FPGA-based MD simulator implementing MCA method for Xilinx Virtex-IV. It performs about 10 to 100 times faster than software implementation depending on the simulation accuracy desired. We also design fast and scalable Reconfigurable mesh (R-Mesh) algorithms for MD simulations. This work demonstrates that the large scale biological studies can be simulated in close to real time. The R-Mesh algorithms we design highlight the feasibility of these models to evaluate potentials with faster calculation times. Specifically, we develop R-Mesh algorithms for both Direct method and Multigrid method. The Direct method evaluates exact potentials and forces, but requires O(N^2) calculation time for evaluating electrostatic forces on a general purpose processor. The MG method adopts an interpolation technique to reduce calculation time to O(N) for a given accuracy. However, our R-Mesh algorithms require only O(N) or O(logN) time complexity for the Direct method on N linear R-Mesh and N¡¿N R-Mesh, respectively and O(r)+O(logM) time complexity for the Multigrid method on an X¡¿Y¡¿Z R-Mesh. r is N/M and M = X¡¿Y¡¿Z is the number of finest grid points

Mining a Small Medical Data Set by Integrating the Decision Tree and t-test

[[abstract]]Although several researchers have used statistical methods to prove that aspiration followed by the injection of 95% ethanol left in situ (retention) is an effective treatment for ovarian endometriomas, very few discuss the different conditions that could generate different recovery rates for the patients. Therefore, this study adopts the statistical method and decision tree techniques together to analyze the postoperative status of ovarian endometriosis patients under different conditions. Since our collected data set is small, containing only 212 records, we use all of these data as the training data. Therefore, instead of using a resultant tree to generate rules directly, we use the value of each node as a cut point to generate all possible rules from the tree first. Then, using t-test, we verify the rules to discover some useful description rules after all possible rules from the tree have been generated. Experimental results show that our approach can find some new interesting knowledge about recurrent ovarian endometriomas under different conditions.[[journaltype]]國外[[incitationindex]]EI[[booktype]]紙本[[countrycodes]]FI