Compact Digital Predistortion for Multi-band and Wide-band RF Transmitters

This thesis is focusing on developing a compact digital predistortion (DPD) system which costs less DPD added power consumptions. It explores a new theory and techniques to relieve the requirement of the number of training samples and the sampling-rate of feedback ADCs in DPD systems. A new theory about the information carried by training samples is introduced. It connects the generalized error of the DPD estimation algorithm with the statistical properties of modulated signals. Secondly, based on the proposed theory, this work introduces a compressed sample selection method to reduce the number of training samples by only selecting the minimal samples which satisfy the foreknown probability information. The number of training samples and complex multiplication operations required for coefficients estimation can be reduced by more than ten times without additional calculation resource. Thirdly, based on the proposed theory, this thesis proves that theoretically a DPD system using memory polynomial based behavioural modes and least-square (LS) based algorithms can be performed with any sampling-rate of feedback samples. The principle, implementation and practical concerns of the undersampling DPD which uses lower sampling-rate ADC are then introduced. Finally, the observation bandwidth of DPD systems can be extended by the proposed multi-rate track-and-hold circuits with the associated algorithm. By addressing several parameters of ADC and corresponding DPD algorithm, multi-GHz observation bandwidth using only a 61.44MHz ADC is achieved, and demonstrated the satisfactory linearization performance of multi-band and continued wideband RF transmitter applications via extensive experimental tests

Design and demonstration of digital pre-distortion using software defined radio

Abstract. High data rates for large number of users set tight requirements for signal quality measured in terms of error vector magnitude (EVM). In radio transmitters, nonlinear distortion dominated by power amplifiers (PAs) often limits the achievable EVM. However, the linearity can be improved by linearization techniques. Digital pre-distortion (DPD) is one of these widely used linearization techniques for an effective distortion reduction over a wide bandwidth. In DPD, the nonlinearity of the transmitter is pre-compensated in the digital domain to achieve linear output. Moreover, DPD is used to enable PAs to operate in the power-efficient region with a decent linearity. As we are moving towards millimetre-wave frequencies to enable the wideband communications, the design of the DPD algorithm must be optimized in terms of performance and power consumption. Moreover, continuous development of wireless infrastructure motivates to make research on programmable and reconfigurable platforms in order to decrease the demonstration cost and time, especially for the demonstration purposes. This thesis illustrates and presents how software defined radio (SDR) platforms can be used to demonstrate DPD. Universal software defined peripheral (USRP) X300 is a commercial software defined radio (SDR) platform. The chosen model, X300, has two independent channels equipped with individual transceiver cards. SIMULINK is used to communicate with the device and the two channels of X300 are used as transmitter and receiver simultaneously in full-duplex mode. Hence, a single USRP device is acting as an operational transmitter and feedback receiver, simultaneously. The implemented USRP design consists of SIMULINK based transceiver design and lookup table based DPD in which the coefficients are calculated in MATLAB offline. An external PA, i.e. ZFL-2000+ together with a directional coupler and attenuator are connected between the TX/RX port and RX2 port to measure the nonlinearity. The nonlinearity transceiver is measured with and without the external PA. The experimental results show decent performance for linearization by using the USRP platform. However, the results differ widely due to the used USRP transceiver parameterization and PA operational point. The 16 QAM test signal with 500 kHz bandwidth is fed to the USRP transmit chain. As an example, the DPD algorithm improves the EVM from 7.6% to 2.1% and also the ACPR is reduced around 10 dB with the 16 QAM input signal where approximately + 2.2 dBm input power applied to the external PA

A fast engineering approach to high efficiency power amplifier linearization for avionics applications

This PhD thesis provides a fast engineering approach to the design of digital predistortion (DPD) linearizers from several perspectives: i) enhancing the off-line training performance of open-loop DPD, ii) providing robustness and reducing the computational complexity of the parameters identification subsystem and, iii) importing machine learning techniques to favor the automatic tuning of power amplifiers (PAs) and DPD linearizers with several free-parameters to maximize power efficiency while meeting the linearity specifications. One of the essential parts of unmanned aerial vehicles (UAV) is the avionics, being the radio control one of the earliest avionics present in the UAV. Unlike the control signal, for transferring user data (such as images, video, etc.) real-time from the drone to the ground station, large transmission rates are required. The PA is a key element in the transmitter chain to guarantee the data transmission (video, photo, etc.) over a long range from the ground station. The more linear output power, the better the coverage or alternatively, with the same coverage, better SNR allows the use of high-order modulation schemes and thus higher transmission rates are achieved. In the context of UAV wireless communications, the power consumption, size and weight of the payload is of significant importance. Therefore, the PA design has to take into account the compromise among bandwidth, output power, linearity and power efficiency (very critical in battery-supplied devices). The PA can be designed to maximize its power efficiency or its linearity, but not both. Therefore, a way to deal with this inherent trade-off is to design high efficient amplification topologies and let the PA linearizers take care of the linearity requirements. Among the linearizers, DPD linearization is the preferred solution to both academia and industry, for its high flexibility and linearization performance. In order to save as many computational and power resources as possible, the implementation of an open-loop DPD results a very attractive solution for UAV applications. This thesis contributes to the PA linearization, especially on off-line training for open-loop DPD, by presenting two different methods for reducing the design and operating costs of an open-loop DPD, based on the analysis of the DPD function. The first method focuses on the input domain analysis, proposing mesh-selecting (MeS) methods to accurately select the proper samples for a computationally efficient DPD parameter estimation. Focusing in the MeS method with better performance, the memory I-Q MeS method is combined with feature extraction dimensionality reduction technique to allow a computational complexity reduction in the identification subsystem by a factor of 65, in comparison to using the classical QR-LS solver and consecutive samples selection. In addition, the memory I-Q MeS method has been proved to be of crucial interest when training artificial neural networks (ANN) for DPD purposes, by significantly reducing the ANN training time. The second method involves the use of machine learning techniques in the DPD design procedure to enlarge the capacity of the DPD algorithm when considering a high number of free parameters to tune. On the one hand, the adaLIPO global optimization algorithm is used to find the best parameter configuration of a generalized memory polynomial behavioral model for DPD. On the other hand, a methodology to conduct a global optimization search is proposed to find the optimum values of a set of key circuit and system level parameters, that properly combined with DPD linearization and crest factor reduction techniques, can exploit at best dual-input PAs in terms of maximizing power efficiency along wide bandwidths while being compliant with the linearity specifications. The advantages of these proposed techniques have been validated through experimental tests and the obtained results are analyzed and discussed along this thesis.Aquesta tesi doctoral proporciona unes pautes per al disseny de linealitzadors basats en predistorsió digital (DPD) des de diverses perspectives: i) millorar el rendiment del DPD en llaç obert, ii) proporcionar robustesa i reduir la complexitat computacional del subsistema d'identificació de paràmetres i, iii) incorporació de tècniques d'aprenentatge automàtic per afavorir l'auto-ajustament d'amplificadors de potència (PAs) i linealitzadors DPD amb diversos graus de llibertat per poder maximitzar l’eficiència energètica i al mateix temps acomplir amb les especificacions de linealitat. Una de les parts essencials dels vehicles aeris no tripulats (UAV) _es l’aviònica, sent el radiocontrol un dels primers sistemes presents als UAV. Per transferir dades d'usuari (com ara imatges, vídeo, etc.) en temps real des del dron a l’estació terrestre, es requereixen taxes de transmissió grans. El PA _es un element clau de la cadena del transmissor per poder garantir la transmissió de dades a grans distàncies de l’estació terrestre. A major potència de sortida, més cobertura o, alternativament, amb la mateixa cobertura, millor relació senyal-soroll (SNR) la qual cosa permet l’ús d'esquemes de modulació d'ordres superiors i, per tant, aconseguir velocitats de transmissió més altes. En el context de les comunicacions sense fils en UAVs, el consum de potència, la mida i el pes de la càrrega útil són de vital importància. Per tant, el disseny del PA ha de tenir en compte el compromís entre ample de banda, potència de sortida, linealitat i eficiència energètica (molt crític en dispositius alimentats amb bateries). El PA es pot dissenyar per maximitzar la seva eficiència energètica o la seva linealitat, però no totes dues. Per tant, per afrontar aquest compromís s'utilitzen topologies amplificadores d'alta eficiència i es deixa que el linealitzador s'encarregui de garantir els nivells necessaris de linealitat. Entre els linealitzadors, la linealització DPD és la solució preferida tant per al món acadèmic com per a la indústria, per la seva alta flexibilitat i rendiment. Per tal d'estalviar tant recursos computacionals com consum de potència, la implementació d'un DPD en lla_c obert resulta una solució molt atractiva per a les aplicacions UAV. Aquesta tesi contribueix a la linealització del PA, especialment a l'entrenament fora de línia de linealitzadors DPD en llaç obert, presentant dos mètodes diferents per reduir el cost computacional i augmentar la fiabilitat dels DPDs en llaç obert. El primer mètode se centra en l’anàlisi de l’estadística del senyal d'entrada, proposant mètodes de selecció de malla (MeS) per seleccionar les mostres més significatives per a una estimació computacionalment eficient dels paràmetres del DPD. El mètode proposat IQ MeS amb memòria es pot combinar amb tècniques de reducció del model del DPD i d'aquesta manera poder aconseguir una reducció de la complexitat computacional en el subsistema d’identificació per un factor de 65, en comparació amb l’ús de l'algoritme clàssic QR-LS i selecció de mostres d'entrenament consecutives. El segon mètode consisteix en l’ús de tècniques d'aprenentatge automàtic pel disseny del DPD quan es considera un gran nombre de graus de llibertat (paràmetres) per sintonitzar. D'una banda, l'algorisme d’optimització global adaLIPO s'utilitza per trobar la millor configuració de paràmetres d'un model polinomial amb memòria generalitzat per a DPD. D'altra banda, es proposa una estratègia per l’optimització global d'un conjunt de paràmetres clau per al disseny a nivell de circuit i sistema, que combinats amb linealització DPD i les tècniques de reducció del factor de cresta, poden maximitzar l’eficiència de PAs d'entrada dual de gran ample de banda, alhora que compleixen les especificacions de linealitat. Els avantatges d'aquestes tècniques proposades s'han validat mitjançant proves experimentals i els resultats obtinguts s'analitzen i es discuteixen al llarg d'aquesta tesi

Wideband and high-power nonlinear measurement system for the characterisation of GaN amplifiers

Recent RF applications and cellular networks architecture require to use high-power PAs, therefore it is critical to characterise their behaviour under appropriate operating condition with an accurate, reliable, fast, and flexible measurement system. As highpower PAs are typically operated in the pulsed mode, measurement system should be able to apply pulsed excitation and perform different types of characterisation under pulsed condition. Integrating pulsed capability into a measurement system to characterise large-signal behaviour of the device is relatively expensive and rigid in terms of instrumentation. Moreover, the inaccessible software that is used by the traditional systems has made them a vendor-defined system, where their application cannot be amended to scope specific phenomena. This is contrary to the need for a flexible pulsed system that can be extended and modified according to user preferences. This thesis presents a high-speed pulsed measurement system that maintains flexibility, upgradability, accuracy, expanded power, and bandwidth ranges. The system is configured around NI modules to apply DC and RF signals and analyse them by employing vector signal transceiver (VST) with up to 1 GHz bandwidth. Due to employing programable VSTs, and accessibility of measured raw samples, different types of measurements can be performed, and small and large-signal behaviour of the device can be analysed. The aforementioned features of the developed measurement system assist to analyse the time-domain behaviour of the device and characterise the physical phenomenon such as thermal, traps effect on large-signal behaviour of the device. As an application of developed high-power measurement system and operating it under wideband RF stimulus, the trapping effect on the large-signal behaviour of the PA is investigated. Time-domain behaviour represents significant variation in the input and output of the device. These variation leads to change the optimum load impedance of the device in time-domain, which decreases the performance of the device up to 8% and mostly linked to the traps of the device. moreover, linearity of the device in time-domain is analysed and intermodulation distortion levels of the device are extracted in time-domain at various timeslots of RF pulses. Interesting results are achieved by applying various drain-lag levels to the device, which shows linearity of the device increases up to 5 dB in back-off operation regime. In this work, for the first time, a nonlinear behavioural model is provided for the surface traps of GaN device. Developed measurement system utilise Cardiff behavioural model during load-pull measurements to decrease the number of load impedances to find the optimum impedance of the device and increase the speed of process. By applying gate-lag levels and pre-charging the surface traps of the device before conducting active load-pull measurements, relation between the Cardiff behavioural model and gate-lag levels of the device is investigated and a new model is achieved by using quadratic function to incorporate the gate-lag effect into the Cardiff behavioural model. Furthermore Cardiff behavioural model variation in timedomain is also achieved at different gate-lag levels and clarifies pre charging traps can reduce the variation in time-domain

Multi-sines stimulus design for the assessment of non-linear devices

The intention of the work presented is to provide novel, accurate and time-efficient way of designing multi-sines stimulus signal to replace real-life modulated signals prevailing within telecommunication networks, hence providing a novel tool for the development of modern RF measurement and design solution. The work demonstrated that with 50 tones, the multi-sines stimulus excites almost the same level of nonlinearity as real modulated signals do. For this conclusion the investigation of nonlinear behaviour mechanism was taken and a real DUT was measured under designed multi-siness and various types of modulated signals. It is also demonstrated that this multi-sines stimulus is compatible with the advanced RF measurement systems which are capable of measuring the complete RF waveform including the harmonic and base-band frequencies but demanding a periodical stimulus signal. Furthermore, a novel and quick sub-sampling algorithm was proposed to efficiently use the memory of Sampling Oscilloscope and therefore allows for accurate multi-sines capturing. An averaging algorithm for multi-sines stimulus was proposed to “stabilize” the captured waveform and a PCA based phase compensating algorithm was also proposed to tackle the problem of frequency shift under multi-sines excitation.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Multi-sines stimulus design for the assessment of non-linear devices

The intention of the work presented is to provide novel, accurate and time-efficient way of designing multi-sines stimulus signal to replace real-life modulated signals prevailing within telecommunication networks, hence providing a novel tool for the development of modern RF measurement and design solution. The work demonstrated that with 50 tones, the multi-sines stimulus excites almost the same level of nonlinearity as real modulated signals do. For this conclusion the investigation of nonlinear behaviour mechanism was taken and a real DUT was measured under designed multi-siness and various types of modulated signals. It is also demonstrated that this multi-sines stimulus is compatible with the advanced RF measurement systems which are capable of measuring the complete RF waveform including the harmonic and base-band frequencies but demanding a periodical stimulus signal. Furthermore, a novel and quick sub-sampling algorithm was proposed to efficiently use the memory of Sampling Oscilloscope and therefore allows for accurate multi-sines capturing. An averaging algorithm for multi-sines stimulus was proposed to “stabilize” the captured waveform and a PCA based phase compensating algorithm was also proposed to tackle the problem of frequency shift under multi-sines excitation