Saliency Ratio and Power Factor of IPM Motors Optimally Designed for High Efficiency and Low Cost Objectives

This paper uses formal mathematical optimization techniques based on parametric finite-element-based computationally efficient models and differential evolution algorithms. For constant-power applications, in the novel approach described, three concurrent objective functions are minimized: material cost, losses, in order to ensure high efficiency, and the difference between the rated and the characteristic current, aiming to achieve very high constant-power flux-weakening range. Only the first two objectives are considered for constant-torque applications. Two types of interior permanent magnet rotors in a single- and double-layer V-shaped configuration are considered, respectively. The stator has the typical two slots per pole and phase distributed winding configuration. The results for the constant-torque design show that, in line with expectations, high efficiency and high power factor machines are more costly, and that the low-cost machines have poorer efficiency and power factor and most importantly, and despite a common misconception, the saliency ratio may also be lower in this case. For constant-power designs, the saliency ratio can be beneficial. Nevertheless, despite a common misconception, when cost is considered alongside performance as an objective, a higher saliency ratio does not necessarily improve the power factors of motors suitable for ideal infinite flux weakening

Performance comparison between Surface Mounted and Interior PM motor drives for Electric Vehicle application

Electric Vehicles make use of permanent magnet synchronous traction motors for their high torque density and efficiency. A comparison between interior permanent magnet (IPM) and surface mounted permanent magnet (SPM) motors is carried out, in terms of performance at given inverter ratings. The results of the analysis, based on a simplified analytical model and confirmed by FE analysis, show that the two motors have similar rated power but that the SPM motor has barely no overload capability, independently of the available inverter current. Moreover the loss behavior of the two motors is rather different in the various operating ranges with the SPM one better at low speed due to short end connections but penalized at high speed by the need of a significant de-excitation current. The analysis is validated through finite-element simulation of two actual motor design

Six-Phase Fractional-Slot-per-Pole-per-Phase Permanent-Magnet Machines With Low Space Harmonics for Electric Vehicle Application

This paper discusses the development of new winding configuration for six-phase permanent-magnet (PM) machines with 18 slots and 8 poles, which eliminates and/or reduces undesirable space harmonics in the stator magnetomotive force. The proposed configuration improves power/torque density and efficiency with a reduction in eddy-current losses in the rotor permanent magnets and copper losses in end windings. To improve drive train availability for applications in electric vehicles (EVs), this paper proposes the design of a six-phase PM machine as two independent three-phase windings. A number of possible phase shifts between two sets of three-phase windings due to their slot-pole combination and winding configuration are investigated, and the optimum phase shift is selected by analyzing the harmonic distributions and their effect on machine performance, including the rotor eddy-current losses. The machine design is optimized for a given set of specifications for EVs, under electrical, thermal and volumetric constraints, and demonstrated by the experimental measurements on a prototype machine

Slot/pole Combinations Choice for Concentrated Multiphase Machines dedicated to Mild-Hybrid Applications

Version de l'éditeur à l'adresse suivante : http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6119910&isnumber=6119266This paper presents multiphase permanent magnet machines with concentrated non-overlapped winding as a good candidate for automotive low voltage mild-hybrid applications. These machines often require a trade-off between low speed performances such as high torque density and high speed performances like flux weakening capabilities. This paper describes how to choose a key design parameter to ease this compromise, the slots/poles combination, according to three parameters: winding factor including harmonics factor, rotor losses amount thanks to a comparison factor and radial forces balancing. The comparison criterion are based on both analytical formula and Finite Element Analysis.Projet MHYGALE/ ADEM

Brushless traction PM machines using commercial drive technology, part II: Comparative study of the motor configurations

In Part II a comparative analysis of the different brushless PM motor configurations, including exterior and interior rotor arrangements, salient and non-salient surface-mounted PM rotors, concentrated and distributed armature windings is presented. The comparative study is based on the developed design methodology given in the Part I of this paper. These motor configurations are investigated to be exploited for the particular automotive application - in-wheel hub traction motor of 80 kW, 1000 rpm base speed and constant power speed range of 4.5:1. It is shown that the interior surface-mounted non-salient PM motor with the concentrated winding is the most appropriate machine type for the considered application

New 5-Phase Concentrated Winding Machine with Bi-Harmonic Rotor for Automotive Application

For a power range from 10 to 30 kW, 5-phase machines are well adapted to low-voltage (48V) supply thanks to their reduced current per phase. For three-phase machines but with higher voltages (>120V), machines with a number of slots per pole and per phase spp equal to 0.5 (as the 12slots/8poles combination) are widely used in hybrid automotive applications when a wide speed range is required. The reason is that the value of spp=0.5 guarantees no sub-harmonics and thus induces low level of permanent magnet rotor losses. In this paper a 20slots/8poles/5phases machine is chosen. With a winding factor of only 0.588 for the first harmonic, this machine is only interesting if its high third harmonic winding factor (0.951) is used. Thus, a new bi-harmonic rotor structure is presented. Thanks to adequate control with flux-weakening and ratio r between first and third harmonic currents, the maximum torque versus speed characteristic is determined.Projet ADEME/MHYGAL

Analytical Model of Magnet Eddy-Current Volume Losses in Multi-phase PM Machines with Concentrated Winding

Thanks to IEEE. The original PDF of the article can be found at: http://ieeexplore.ieee.org/xpl/login.jsp?tp=&arnumber=6342330&url=http%3A%2F%2Fieeexplore.ieee.org%2Fxpls%2Fabs_all.jsp%3Farnumber%3D6342330 MHYGALE, project managed by VALEO-EEMthis paper studies magnet eddy-current losses in permanent magnet (PM) machines with concentrated winding. First of all, space harmonics of magnetomotive force (MMF) and their influence on magnet losses in electrical machines are investigated. Secondly, analytical model of magnet volume losses is developed by studying the interaction between MMF harmonics wavelengths and magnet pole dimensions. Different cases of this interaction are studied according to the ratio between each harmonic wavelength and magnet pole width (following flux density variation). Then various losses sub-models are deduced. Finally, using this analytical model, magnet volume losses for many slots/poles combinations of 3, 5, and 7 phase machines with concentrated winding are compared. This comparison leads to classify combinations into different families depending on their magnet losses level. Besides, in order to validate the theoretical study, Finite Element models are built and simulation results are compared with analytical calculations.MHYGALE/ADEM

Core Losses and Torque Ripple in IPM Machines: Dedicated Modeling and Design Trade Off

The proper combination of stator and rotor slot numbers is pursued in the design of interior permanent-magnet (IPM) motors with wide constant-power speed range. At high speed, in the flux-weakening region, the arising of stator and rotor iron losses due to magnetomotive-force (MMF) spatial harmonics limits the IPM motor performance. Torque ripple is another problem for this kind of machines, both at low and high speed. The numbers of stator slots and rotor equivalent slots have a major impact on both the loss and ripple aspects. A simplified model is proposed here in order to evaluate both problems with a general approach and point out the possible design tradeoff. With respect to previous models in the literature, both stator and rotor losses are included, and a more comprehensive approach is followed in the description of the rotor MMF harmonics. The model's effectiveness is tested through finite element analysis simulations and some experimental results. The proposed approach is useful for the selection of the IPM machine structure according to the specific requirements of the applicatio

A Novel Rotor Topology for High-Performance Fractional Slot Concentrated Winding Interior Permanent Magnet Machine

This article presents a finite-element-based, multiobjective design optimization study of the fractional-slot, concentrated wound, permanent magnet synchronous machine (FSCW PMSM). Design objectives included maximization of efficiency, minimization of cost and low ripple without sacrificing torque density and wide constant power speed range. A large-scale optimization study revealed that while a V-type rotor provides high torque density, a spoke-type rotor has the benefit of low torque ripple. Quest for a design that can combine the goodness of both V-and spoke type rotors for an FSCW stator has led to a novel interior permanent magnet rotor topology referred here as Y-type. The goals of achieving maximum efficiency, minimum cost and wide CPSR were also accomplished in the proposed Y-type FSCW IPMSM. For experimental verification purpose, three fully optimized rotors-V-, spoke-and Y-type were constructed for a 12-slot/10-pole FSCW stator. Extensive experimental tests were conducted on three machines for a detailed comparison study. It will be shown that the proposed Y-type FSCW IPMSM outperforms both V and spoke-type configurations. A scaled-up version of the Y-type FSCW IPMSM shown to have satisfied many of the Freeedomcar 2020 targets, which is promising for application in electric vehicles

INVESTIGATION OF PERMANENT MAGNET SYNCHRONOUS MACHINES FOR DIRECT-DRIVE AND INTEGRATED CHARGING APPLICATIONS IN ELECTRIC VEHICLES

Electrified vehicles have proven to be potential candidates in the future for disrupting the automotive industry which is dominated by conventional gasoline vehicles. Electric vehicle (EV) technology has evolved rapidly over the last decade with new designs of EV drivetrain systems and components but no specific design has been able to serve as a solution that is affordable, reliable and performance-wise similar to existing gasoline vehicle equivalent. Extended driving range and overall cost of the vehicle still remain major bottlenecks. Understanding the state-of-the-art technologies and challenges in existing electric vehicle powertrain and charging systems, with major focus on permanent magnet synchronous machines & drives, this dissertation presents the following